Products

VF 330™ is a 100% solid, fast setting, plural component, polyurea elastomer and high performance coating. VF 330 is specially formulated for high abrasion resistance and offers the best combination of elastomeric waterproofing, corrosion protection, and abrasion resistance. VF 330 can be applied horizontally, vertically, and overhead, making it ideal for industrial applications with a variety of substrates, and complex geometries.

VF 380-F™ is a 100% solids elastomeric polyurea developed for applications such as geotextile lining membranes. VF380-F may also be applied to concrete and steel substrates. VF380-F is a volatile free, odorless system applied with 1:1 mix ratio with plural component spray equipment. VersaFlex VF380-F provides less shrinkage with improved elongation characteristics. As a result, VF380-F makes an excellent polyurea for liners, geotextile coatings, and applications where resilience and durability are required. VF380-F may be applied at varying thicknesses in a single application using a multi-pass spray technique.

VF 380™ is a 100% solids, fast setting, plural component, ultra-low shrink, polyurea elastomer and high performance coating. VF-380 is primarily designed for foam, geotextile and other non-reinforced substrates due to its specially designed low shrink formulation, but has excellent bond to steel, concrete, masonry and other properly prepared substrates. VF-380 is an excellent coatings solution for industrial applications requiring a resilient liner for waterproofing or secondary containment.

FSS 50DM+™ is a 100% solids, fast setting, plu-ral component, polyurea elastomer and high perfor-mance coating. FSS 50DM+ is primarily designed for properly prepared steel and metal substrates, however, due to it’s higher modulus, and faster gel times, FSS 50DM+ has excellent bond to concrete, masonry and other properly prepared substrates. FSS 50DM+ can be applied horizontally, vertically, and overhead, making it ideal for industrial applications with a variety of sub-strates, and complex geometries.

VF 280™ is a fast set, rapid curing, pure elastomeric polyurea protective coating for industrial applications requiring a flexible coating or lining for waterproofing or secondary containment. This protective membrane can be applied to geotextile fabric, concrete and steel substrates. VF 280 is a volatile free, odorless system proportioned at a 1:1 mix ratio with plural component spray equipment. VF 280 may be applied at varying thicknesses in a single application using a multi-pass spray technique.

Arostruct® is a fast set, rapid curing, 100% solids, semi-structural, two-component performance modified polyurea spray coating/lining material. Its fast gel time makes it suitable for applications down to -20°F without special conditioning of the component resins and isocyanates. AroStruct produces an extremely tough rigid film at all thicknesses.

FSS 45DC™ is a 100% solid, fast setting, plural component, polyurea elastomer and high performance coating. FSS 45DC is primarily designed for properly prepared concrete and masonry, due to it’s higher elongation and extended gel time, but will bond tenaciously to steel and other properly prepared substrates. FSS 45DC is an economical coatings solution for industrial applications requiring a resilient liner for waterproofing and/or abrasion resistance. FSS 45DC can be applied horizontally, vertically, and overhead, making it ideal for industrial applications with a variety of substrates, and complex geometries.

VersaProof™ Primer F is a specially formulated, twocomponent urethane based rapid repair and primer. In its low viscosity formulation, VersaProof™ Primer F may be used to repair or prime cementitous and porous masonry substrates. It’s unique low viscosity formulation allows for excellent substrate penetration for improved adhesion. VersaProof™ Primer F may be applied at temperatures greater than –20° F by plural component sprayer, roller, squeegee, or broom. VersaProof™ Primer F may be used with all VersaFlex rapid curing sealants and coatings for interior and exterior application.

Versaproof™ Primer E is a 100% solids, zero VOC, two component, epoxy sealer and primer. VersaProof Primer E is a penetrating primer/sealer, uniquely formulated to reduce outgassing and improve adhesion. VersaProof Primer E is ideal for damp concrete substrates, or substrates where trapped moisture and/or high moisture vapor drive is expected, such as split slab construction, or with stay in place forms. VersaProof Primer E is typically thinned by 50% with Acetone, and may be applied at temperatures greater than 40° F by airless or air assisted spraying, brush, roller, or squeegee. VersaProof Primer E may be used with all VersaProof rapid curing sealants and coatings for interior and exterior application.

VF 20™ is a versatile two-component urethane based primer designed for a variety of substrates. It’s unique formulation allows for dilution with acetone by 33-50% for improved penetration, coverage, and adhesion. VF-20 may be applied at temperatures greater than 0˚ F by airless sprayer, roller, squeegee, or broom. VF-20 may be used with all VersaFlex rapid curing sealants and coatings for interior and exterior application. VF-20 has been designed along with VF-15 to offer versatility and flexibility in primer selection. VF-20 is ideal for use when longer working time is needed. While VF-20 will cure down to 0˚ F it is ideal at temperatures above 75˚ F. VF-15 is typically preferred at temperatures between 40—75˚ F or at elevated temperatures when a faster re-coat is required such as smaller projects or where quick return to service is needed.

VF 15™ is a versatile two-component urethane based primer designed for a variety of substrates. It’s unique formulation allows for dilution with acetone by 33-50% for improved penetration, coverage, and adhesion. VF-15 may be applied at temperatures greater than 0˚ F by airless sprayer, roller, squeegee, or broom. VF-15 may be used with all VersaFlex rapid curing sealants and coatings for interior and exterior application. VF-15 has been designed along with VF-20™ to offer versatility and flexibility in primer selection. VF-15 will cure to 0°F is typically preferred at temperatures between 40—75°F or at elevated temperatures when a faster re-coat is required such as smaller projects or where quick return to service is needed. VF-20 is ideal for use when longer working time is needed.

VersaProof™ Primer S is the most adaptable and user friendly multi‐purpose primer. VersaProof™ Primer S is a versatile two‐component urethane based primer designed for a variety of substrates. It’s unique formulation allows for dilution with acetone by 33‐50% for improved penetration, coverage, and adhesion. VersaProof™ Primer S may be applied at temperatures greater than 0° F by airless sprayer, roller, squeegee, or broom. VersaProof™ Primer S may be used with all Versa- Roof™ rapid curing sealants and coatings for interior and exterior application.

VF 502™ is a fast set, rapid curing, 100% solids, flexible, two-component polyurethane/polyurea elastomer spray coating material. VF 502 was developed for use in high-pressure spray equipment and is used by itself or in combination with other materials to produce a protective coating on metal, concrete, aluminum, and composite substrates. VF 502 creates an extremely tough film at all thicknesses and can produce films from 10 mils to 250 mils without visible sag or runs in single or multiple pass applications. This material is relatively moisture and temperature insensitive, allowing use in the most problematic ambient conditions.

PW-1™ is a specially formulated, low solids, single component primer designed for steel and metal. Its low viscosity contributes to ease of application and adheres well for top coating with VersaFlex polyurea products. PW-1 primer may be used with all VersaFlex rapid curing polyurea sealants and spray coating systems. It is designed for use in both interior and exterior priming situations. PW-1 is ideal for priming metal surfaces to help temporarily hold back flash rust.

VF 30™ is a low viscosity, high solids epoxy developed as a penetrating concrete primer for polyurea applications. VF 30 penetrates and strengthens the surface of the concrete, reduces pin-hole formations and provides a chemically reactive surface to accept VersaFlex polyurea systems. Adhesion is increased with the use of VF 30 by up to three times that of unprimed concrete.

FSS 45DC™ F Plus is a 100% solid, fast setting, plural component, polyurea elastomer and high perfor-mance coating. FSS 45DC-F Plus is primarily designed for properly prepared concrete and masonry, but will bond tenaciously to steel and other properly prepared substrates. It is designed as a faster, more robust ver-sion of the classic FSS 45DC. FSS 45DC-F Plus is an eco-nomical coatings solution for industrial applications re-quiring a resilient liner for waterproofing and/or abra-sion resistance. FSS 45DC-F Plus can be applied horizon-tally, vertically, and overhead, making it ideal for indus-trial applications with a variety of substrates, and com-plex geometries.