Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
- Vehicle
Epoxy and cycloaliphatic amine.
Features & Benefits
- Ready-to-Use Product Features
- Features
- Cures Crystal Clear
- Cures Without Shrinkage
- Excellent Chemical Resistance and Hardness
Applications & Uses
- Applications
- Surface Preparation
Remove all dirt, scale, and grease. Remove wax and any other coatings. Allow to dry thoroughly.
- Mixing and Thinning
Mix two parts by volume of E15712 (part A) to one part of E15713 (part B) with gentle mechanical agitation for two minutes. Avoid entraining air into mixture.
- Application
Apply by pouring, brushing, troweling, or by squeegee. Rolling may entrain air bubbles. Apply to a maximum thickness of 1/4" to avoid intense exotherm. Apply in multiple coats for thicker finishes. To release air bubbles, direct hot air onto the freshly applied coating, i.e. hair dryer. Full properties are developed within seven days. Apply between 60ºF and 90ºF and less than 80% relative humidity.
- Recoat Time
Recoat after eight hours, or as soon as tack free. After 48 hours, a light sanding with aluminum oxide, 400 grit sandpaper followed by a fresh water rinse is recommended before recoat.
- Warning
Mixture will exotherm within 15 minutes of mixing, producing intense heat and fumes if not quickly spread over the surface to be coated. Mix only what can be spread in 15 minutes! If exotherm occurs, vacate the area and provide copious ventilation. Part B and any mixture thereof is slightly corrosive. Wear gloves and goggles. Wash exposed skin with soap and water. Flush eye contamination with water for 15 minutes and seek medical attention.
Properties
- Appearance
- High Gloss Crystal Clear Film
- Specifications
- Cured Film Properties
Excellent anticorrosive properties over steel. Very good water resistance within eight hours. Good resistance to solvents and chemicals within seven days. Not designed as an exterior finish coat.
| Value | Units | Test Method / Conditions | |
| Dry (Touch) | 8.0 | h | — |
| Dry (Light Trafic) | 24.0 | h | — |
| Dry (Full Resistance) | 7.0 | days | — |
| Solids by Weight | 100.0 | % | — |
| Solids by Volume | 100.0 | % | — |
| Coverage (1.8" DFT) | 13.0 | Sq.ft/gal | — |
| Coverage (5 Mils DFT) | 320.0 | Sq.ft/gal | — |
| V.O.C. | 0.0 | lb/gal | — |
Packaging & Availability
- Standard Packaging
- Three gallon kit