Products

Warren Paint & Color 100% Solids Clear Epoxy Two Component #E15712/E15713 is formulated to provide extreme resistance to water, alcohol, and other chemicals. It may be used in aggressive environments for long-term protection of steel and concrete. 100% Solids Clear Epoxy is well suited for decoupage on bar tops, table tops, or as a clear finish over other interior wood and concrete surfaces. It may be applied up to 1/4" per pour for a coating with tremendous "depth." 100% Solids Clear Epoxy should not be used as an exterior topcoat.

Warren Paint & Color Pure Acrylic Sealer is easy to apply to properly prepared concrete and cementitious surfaces. Applied to old and new concrete alike, this product restores and enhances the beauty of aggregate concrete and protects concrete surfaces from oil, dirt, and weather. Available tints help hide defects and discoloration in concrete surfaces. Not recommended for use on brick, slate, stone, or concrete surfaces with sealer buildup. When applied to new concrete, it reduces moisture loss and maximizes concrete cure and strength. Non-aggregate surfaces may be darkened or become splotchy when sealed. Warren's Pure Acrylic Sealer is 100% acrylic and resists yellowing and weathering. Warren's concrete sealers serve two purposes. On new concrete, they seal in moisture, boosting the overall strength of concrete, and reducing failures such as cracks and spalling. The oil and stain resistance of the coated surface is improved. When applied liberally or in two coats, this product imparts a rich glossy look to concrete and exposed aggregate. Pure acrylic composition means longer sealer life with less yellowing.

Warren Paint & Color White Polyamide High Gloss Epoxy Two Component Epoxy # NE 4085/ E 4005 is formulated to provide extreme resistance to corrosion, acids, alkalis, solvents, and other chemicals. It may be used in a marine environment for long term protection of steel and concrete. White Polyamide High Gloss Epoxy is available in white and gray with high build, semi-gloss, and special colors available by special order.

Warren's Polyurethane Gloss Varnish #3004 is formulated to withstand the mild chemical exposure and abrasion. Polyurethane Gloss Varnish is ideal for brush, roller, or spray application due to its moderate dry times. It fully cures overnight and is recommended for application to interior wood, concrete, and properly primmed steel surfaces. Polyurethane Gloss Varnish is available by special order in a wide range of colors and degrees of gloss, and provides good chemical and abrasion resistance.