Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Typical Applications
- Wire and cable sleeve coating
- Fabric coating
- Low hardness rubber articles
- How to Use
A static metering and mixing unit is recommended to feed the mixture of part A and part B in the ratio 1:1. If air bubbles are entrapped during mixing, the mixture must be thoroughly degassed under vacuum. The product can be used with coating machine or diluted to meet processing need. The standard curing temperature is 120-150℃ and the curing time also depends on the thickness of rubber products.
- Processing
- Please exactly control the mixing ratio of part A and part B, otherwise curing process and product properties may be affected.
- The curing time, which depends on curing temperature and the thickness of rubber products, should be adjusted to meet the production needs.
- Please strictly avoid the contact with certain materials such as amines, sulfur, phosphor and tin, which will adversely affect the curing process or even result in no curing.
Properties
- Appearance
- Translucent
- Typical Properties
- Electrical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Solids Content | 100 | % | — |
| Viscosity | 300 | Pa.s | — |
| Hardness (2mm thickness slabs molded 8 minutes at 150°C) | 25 | shore A | — |
| Tensile Strength (2mm thickness slabs molded 8 minutes at 150°C) | 6 | mPa | — |
| Tear Strength (2mm thickness slabs molded 8 minutes at 150°C) | 14 | kN/m | — |
| Elongation (2mm thickness slabs molded 8 minutes at 150°C) | 800 | % | — |
| Value | Units | Test Method / Conditions | |
| Dielectric Strength (1mm thickness slabs molded 8 minutes at 150°C) | 24 | kV/mm | — |
| Volume Resistivity (1mm thickness slabs molded 8 minutes at 150°C) | 10^16 | Ohm.cm | — |
| Dissipation Factor (1mm thickness slabs molded 8 minutes at 150°C) | 0.01 | — | — |
| Tracking Resistance (1mm thickness slabs molded 8 minutes at 150°C) | 3.5 | — | — |
| Value | Units | Test Method / Conditions | |
| T10 5 minutes at 150°C | 10 | s | — |
| T90 5 minutes at 150°C | 30 | s | — |
Packaging & Availability
- Packaging Type
- Packaging
20kg PE lined plastic pails or 200kg PE lined metal drums.
- Packaging
- Keep in cool and well ventilated place from rain, moisture and sunlight. When stored in the original unopened containers, this product has a shelf life of 6 months from the date of manufacture. The containers should be sealed tightly after use.
- This product can be shipped as non-hazardous goods. Avoid fall, upside down and collision with hard objects during transportation.