Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Reinforcement Material
- Composite Materials Functions
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
Applications & Uses
- Applications
- Composites End Use
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Properties
- Mechanical Properties
- Processing Parameters
| Value | Units | Test Method / Conditions | |
| Density (Dam) | 1.2 | g/cm3 | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Tensile Modulus (at 1 mm/min, Dam) | 20000.0 | MPa | ISO 527 |
| Tensile Strength (at Break, 5 mm/min, Dam) | 215.0 | MPa | ISO 527 |
| Tensile Elongation (at Break, 5 mm/min, Dam) | 4.0 | % | ISO 527 |
| Flexural Modulus (at 2 mm/min, Dam) | 15800.0 | MPa | ISO 178 |
| Flexural Stress (at 3.5% Strain, 2 mm/min, Dam) | 295.0 | MPa | ISO 178 |
| Notched Izod Impact Strength (at 23°C, 50% RH, Dam) | 24.0 | kJ/m2 | ISO 180 |
| Unnotched Izod Impact Strength (at 23°C, 50% RH, Dam) | 80.0 | kJ/m2 | ISO 180 |
| Notched Izod Impact Strength (at -30°C, Dam) | 16.0 | kJ/m2 | ISO 180 |
| Unnotched Izod Impact Strength (at -30°C, Dam) | 74.0 | kJ/m2 | ISO 180 |
| Value | Units | Test Method / Conditions | |
| Drying Temperature | 80 - 100 | °C | Desiccant Dryer |
| Drying Time | 6 - 8 | hrs | Desiccant Dryer |
| Melt Temperature | 265 - 280 | °C | — |
| Mould Temperature | 95.0 | °C | — |