Products in Construction Adhesives

Kolon Industries HIKOREZ® H-2300 is a pale yellow thermoplastic resin obtained from C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha, and offers better color, thermal stability and lower odor than the previous C5 hydrocarbon resins. This product has excellent compatibility with Ethylene-Vinyl-Acetate (EVA) and Styrene-Butadiene-Styrene copolymer (SBS), and is used as tackifier resin. .

NEVCHEM® 220 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic and alicyclic monomers derived from petroleum feedstocks.

UNI-REZ 2672 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2672 hot melt polyamide adhesive has excellent green strength, chemical resistance and adhesion to PVC.

TAFIGEL PUR 54 is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 54 can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners.TAFIGEL PUR 54 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties and printing inks. TAFIGEL PUR 54 is suitable for indirect food contact applications.

AGITAN 108 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 108 provides: High cost effectiveness; Excellent compatibility; Very fast action; Good control of foam even at low levels.

UNI-REZ 2210 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 2210 polyamide resin was developed for release lacquers but can also be used as a modifying resin to improve hardness.

AltroColor PU 3000 Color Pastes are based on a polyol ether binder and have been developed particularly for the coloring of polyurethane ether systems. As our AltroColor PU 3000 Color Pastes Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 3040 is rose colored.

Aqueous styrene Acrylic emulsion, solvent- and plasticiser-free

ADDAPT Foamstop VF 35N is a highly effective Foam Control Agent for low VOCphysical Emulsion systems based on PVAC, Styrene/Acrylics or pure Acrylics. It is a proprietary blend of oils with PAG’s and surface active components - MOSH/MOAH free - All constituents comply with the FDA regulation (incidental contact with foodstuff). FDA regulation: #173.340

Puyang Ruicheng Chemical C9 petroleum-resin RC-L140 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

ACCR 130 is a fine white powder. It is processed from white marble.

Radiation-curing, low-viscosity polyester acrylate resin, solvent-free.

Deuterol 201 E is a defoaming dispersing agent for fillers and pigments in water soluble and water miscible primers and lacquers. The wetting effect of Deuterol 201 E in primers and one-coat lacquers, which are applied to badly degreased metal substrates, considerably improves the adhesion of the coating film to the metal substrate. The product also shows a defoaming effect in the manufacture as well in the processing of water dilutable systems. back

UNI-REZ 2632 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2632 hot melt polyamide adhesive has excellent low temperature flexibility and adhesion to various plastic substrates. The low viscosity and moderate softening point allows for lower application temperatures when used with temperature sensitive substrates.

SYLVATAC RE 25 rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

Saudi Carbonate SCC PCC 50C - YB The coated grade PCC finds application in Sealants to achieve better rheological qualities due to its ultra fine and uniform particle size distribution. The fatty acid surface treatment improves the dispersion behavior. The products act as a rheological modifier giving slump control.

MERACRYL™ GMAA is used as building block in applications like paints, dispersions or construction chemicals. It confers specific properties, such as improved freeze-thaw resistance, colloidal stability in emulsion, and enhanced film adhesion.

AltroColor PU 3000 Color Pastes are based on a polyol ether binder and have been developed particularly for the coloring of polyurethane ether systems. As our AltroColor PU 3000 Color Pastes Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 3044 is light yellow colored.

KURARAY POVAL™ 4-88 by Kuraray is polyvinyl alcohol manufactured by alcoholysis of polyvinyl acetate. It is a water-soluble, partially saponified, odorless polymer. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. Applicable for use in remoistenable adhesives. KURARAY POVAL™ 4-88 conforms to EU Directive 67/548/EC.

SYLVARES TR B115 polyterpene resin is a biorenewable tackifier made from selected terpene monomers. This product can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. The aliphatic nature of this product allows compatibility with the mid-block of styrene-isoprene-styrene block copolymers while limiting interaction with the styrenic endblocks providing a balance of tack, peel, cohesive strength, and heat resistance.

SYLFAT 2LT Tall Oil Fatty Acid (TOFA) is refined from selected crude tall oil grades aimed to achieve a low temperature performance, under carefully controlled process conditions and extended analysis for consistent quality. The utility of SYLFAT 2LT can be found in the long carbon chain (C18), acid function of the carboxyl group (COOH), unsaturation of the double bonds and consistently low cloud point and pour point. SYLFAT 2LT is developed for applications requiring low temperature properties.

NEVCHEM® 140 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic and alicyclic monomers derived from petroleum feedstocks.

SYLVARES TP 2019 terpene phenol is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This resin has a high terpene level, which exhibits excellent tackifying, flexibility, and compatibility properties for use in styrenic-block-co-polymer.

AGITAN 150 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 150 is resistant to alkaline environment. It can be used between pH 6 and 11.

AltroColor PU 1905 Color Pastes are based on a polyol ether binder and have been developed particularly for the coloring of polyurethane ether systems. As our AltroColor PU 1900 Color Paste Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 1905 is white colored

AltroColor PU 3000 Color Pastes are based on a polyol ether binder and have been developed particularly for the coloring of polyurethane ether systems. As our AltroColor PU 3000 Color Pastes Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 3389 is oxide black colored.

SYLVARES TR A25L polyterpene resin is a clear, light-colored, low molecular weight resin. This liquid resin may be used as a tackifier in a broad range of adhesive systems or as a modifying resin with other tackifiers to improve adhesion to hard-to-bond surfaces. SYLVARES TR A25L liquid polyterpene can also be used to improve low temperature properties.

Kolon Industries HIKOREZ® T-1080 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for solvent based pressure sensitive adhesive(Solvent Based Pressure Sensitive Adhesive, SBPSA), hot melt based pressure sensitive adhesive(Hot Melt Pressure Sensitive Adhesive, HMPSA) and hot melt adhesive(Hot Melt Adhesive, HMA). .

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5012 is yellow colored.

BONTAMIDE 2030 is a Standard hardener for epoxy resin.

A workhorse and cost-effective oil-based defoamer for adhesive applications. AGITAN 5018 provides excellent compatibility, dispersibility and long term performance in a wide variety of adhesive and coatings formulations.

only available in Asia! A universal workhorse defoamer effective in most adhesives including wood glue, envelope & label, construction, and natural/neoprene formulations. AGITAN A208 is also efficient in pigment dispersing and defoaming metallic inks. The defoamer provides excellent persistence in OPV, wood finishes, and a variety of industrial coating formulations as well.

SYLVARES 1150 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This high heat resistance resin exhibits excellent compatibility and tackifying properties for use in styrenicblock-co-polymers and for solvent acrylic based pressure sensitive adhesives. This resin can also be used to tackify metallocene polymers.

MAISSEN RDP 707U is a redispersible polymer powder(RDP)produced by spray-drying special water-based emulsion, mostly based on vinyl acetate and ethylene. It dissolves in water easily and quickly forms emulsion.

Kolon Industries HIKOREZ® A-1100 is a pale yellow thermoplastic resin obtained from the polymerization of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This resin provides well-balanced adhesion properties such as adhesive strength, bond strength and cohesive force required for pressure sensitive adhesive (PSA), and is mainly used as tackifier and hot melt adhesive (HMA) for pressure sensitive adhesive. This resin also can be used as the binder for hot melt road marking (HMRM). .

DOG Chemie Deolink Amino TM-100 are very versatile bounding additives and coupling agents. Both products are applicable for a broad range of amino reactive thermoset and thermoplastic resins.