Products in Other Building & Construction Applications

Epojet is two-component, super-fluid epoxy resin for injections and anchorings.

BONTAMIDE 2038 is a standard hardener for epoxy resin, no amine blush after curing.

Silpak RU-480 is a liquid, two-component, 100% solids Urethane Elastomer RTV that is easily processed. This system provides a firm, semi-flexible, durable and abrasion resistant rubber compound. Used for a variety of applications including molds, concrete texture stamps and form liners, and rubber parts. Molds are used to cast concrete, wax, and plaster parts.

ACCR 120 is a fine white powder. It is processed from white marble.

Micropol E28-05 is a random ethylene-vinyl acetate copolymer. This grade has been designed for cast / blown film applications where a high degree of flexibility is required combined with the physical cohesive strength properties which render it also suitable for hot-melt adhesive applications. Available in granular or powder form.

Silpak RU-440 is a liquid, two-component, 100% solids Urethane Elastomer RTV that is easy to process. This system is offers good strength properties with excellent library shelf-life. Use to make molds or rubber parts. Molds are used to cast concrete, wax, and plaster parts.

Stellarchem SE/PA745B TPE Compound is shear dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It's a soft, elastomeric polyolefin based, completely recyclable, colorable & non-hygroscopic thermoplastics elastomer material.

CeTePox® 200 R is a unmodified Bisphenol F liquid resin.

BONTAMIDE 2031 is an odorless standard hardener for epoxy resin

ACCR 108 is a fine white powder. It is processed from white marble.

Stellarchem AB-860LG TPE Compound is shear dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It's a soft, elastomeric polyolefin based, completely recyclable, colorable & non-hygroscopic thermoplastics elastomer material.

Foamjet T is high viscosity ultra rapid setting two-component polyurethane resin, to be injected for consolidating and waterproofing of structures subject to strong water ingress

UVP 0101 99 is a clear liquid with low viscosity and good solvency.

Dugdale Plc Intumescent PVC Materials incorporate specially treated graphite flakes that add intumescent properties. At a temperature of around 250°C the layers in each graphite flake separate and this increases the volume of the PVC material by approximately 300 percent. In a fire situation, this reaction would typically be triggered by hot smoke.

Stellarchem AB870LG TPE Compound is shear dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It's a soft, elastomeric polyolefin based, completely recyclable, colorable & non-hygroscopic thermoplastics elastomer material.

FASCAT® 4101 is a amorphous white solid used in the synthesis of saturated polyester resins for powder coatings.

Synglaze 2034 is a high molecular weight Pure Acrylic solution polymer which is ready to use in a mixture of aliphatic and aromatic solvents. Synglaze 2034 has been specially formulated for use as a Brick and tile dressing. It also finds use in sealing off dampness and as a bonding liquid on masonry surfaces. Synglaze TP 2034 dries rapidly at room temperature to give a clear, glossy water resistant film. It has deep penetrating properties and therefore offers extreme durability and is not prone to lifting and peeling. The gloss is enhanced by applying multiple coats. Supplied as a clear liquid at a Viscosity < 50 at 25 degree C(cps) and percent Solid contents :20+1; It can be applied by Brush, Spray, Roller or padding. Synglaze 2034 can be diluted with White Spirits, Solvesso 100 or Xylene in all proportions. Synglaze 2034 should not be applied to a wet surface. Surfaces must be allowed to dry before application of Synglaze 2034.

ETHYLENE VINYL ACETATE (EVA) H2201 contains 18% ethylene vinyl acetate copolymer resin, and is designed for a variety of foam application.

Silpak RU-435TH is a two-component, 100% solids Urethane Elastomer RTV that becomes thixotropic within minutes for creating thin, brush-on bladder molds within hours. Once cured, this urethane RTV provides a strong, durable mold with excellent tear strength. Use to create thin, flexible molds for easier de-molding or use to cut mold cost through minimizing material usage. Applications include mold making for the art, architectural, and foundry industries. Note: A Mother Mold, usually made of plaster, fiberglass or Trowel-On 60 (Thixotropic Plastic), is used to help support thin bladder mold.

BONTAMIDE 2040 is a non-sagging, thixotropic paste, an adhesive to old and new cement.

CHS-EPOXY 573 Is a Bisphenol A/F epoxy resin

AH255 is a Coarse Ground ATH is used in Composites.

UVP 0104 99 is a clear liquid with low viscosity and good solvency.

ACCR T-115 is a fine white powder. It is processed from white marble.

Quality Minerals POLYETHELENE WAX is the trade name of Quality Minerals PCL is polyethylene wax. It has unique polymer properties that make them suitable for many applications. Q-plas EW is produced in pellet/flake form using state-of the art equipment from Federal Republic of Germany.

PLASTOMER® 1090B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1090B/N is a fully crosslinked product and can be reused without scrap during processing.

ACCR T-120 is a fine white powder. It is processed from white marble.

AH330 is a Ground ATH is used in Electronics, Glassware, Spray Up.

CHS-EPOXY 574 Is a Bisphenol A/F resin modified by difunctional reactive diluent

StarBond® 100 is a cold-water soluble, low viscosity, non-ionic polymer for use in industrial applications. It is a natural polysaccharide designed to impart enhanced functional properties including: adhesion/binding, water retention, improved rheology and viscosity. StarBond 100 is an excellent product for binding and adhesive applications where economics is important.

AH430 is a Ground ATH is used in BMC, FRP, Pultrusion.

Sil-cell® 35 has been found to be cost effective in the manufacturing of joint compounds, adhesives, auto body putty, cultured marble, wall patching compounds, stucco, ready mix gypsum plasters, resins, plastics and a variety of other composites. It can also be treated with unique proprietary surface coatings to modify the particle’s surface. In both organic and inorganic composites, these coupling agents improve adhesion.

TSR117 Silicone is a Helping deliver heat, chemical and weather resistance to paints, TSR117 silicone can also help provide electrical insulating properties. In fact, insulation varnishes employing TSR117 coating have met class H insulation requirements for electrical devices. TSR117 silicone coating can be cured at high temperature; or, with the help of a catalyst, undergo low-temperature cure and room-temperature drying.

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

CHS-EPOXY 521 is a Solvent–free water based epoxy system. Epoxy resin modified with mono-functional reactive diluent.

ACCR 104 is a fine white powder. It is processed from white marble.