Products in Industrial Manufacturing

Omnistab IN 518 is an effective liquid polymerization inhibitor or storage stabilizer for photosensitive resins and monomers. It retards the self-polymerization of UV-coating and ink formulations during storage.

Gaskets International T.19X1.0 is used in applications like oven/stove thermal seal and OEM equipment thermal barrier.

PHOTOMER® 6578 is a low viscosity tetra functional aromatic acrylate, which gives very good abrasion and scratch resistance in combination with high flexibility.

Photomer® 8061 is a novel aliphatic monofunctional acrylate (TPGMEMA) of low skin irritancy, low viscosity, low surface tension and low odor. It exhibits good solvency and viscosity reducing characteristics with typical UV/EB curable oligomers and prepolymers.

Omnivad SB Flakes is an organic filler. For absorbent substrates Omnivad SB Flakes can act as a hold-out additive, preventing low viscosity coatings or inks from soaking into the substrate. This additive will help with enhancing higher gloss, increase color strength and improve cure. This Resin is compatible with radically curable inks, coatings and adhesives.

PHOTOMER® 4703 is a proprietary UV/EB curable monoacrylate with low viscosity. It is designed for use in laminating adhesives, etch-resist inks for printed circuit boards, negative photoresists and OPV's for paper and films.

Defoamer for water-based coating systems, silicone free. SCHWEGO foam 8013 is a highly effective defoamer suitable for water- based systems and adhesives especially for those based on polyurethane and acrylate.

SureTac 1740 is a family of tackifiers that include Rosin Ester, C5 Aliphatic, C9 Aromatic, and C5/C9 Aliphatic/Aromatic, and Specialty Resin Dispersions. The product line offers a variety of softening points and may be modified to meet a specific application.

Taconic 7038 PTFE-Glass Fabric is a Standard Grade PTFE-Glass Fabric is used in the widest range of applications due to its combination of high performance and moderate price. Applications include release sheets on heat-sealing machines and laminate presses, release surface for paints, adhesives and food products, gaskets, seals and bearings for chemicals, oils, and gasses, thermal insulation for high-temperature and chemical-resistant applications and covers on hot platens, chutes, hoppers and troughs.

Omnirad 4265 is a highly effective liquid photoinitiator blend, used for UV-polymerisation of suitable resins. Omnirad 4265 is easily incorporated into waterborne formulations.

AGITAN® DF 6027 is a defoamer for all common emulsion systems. It provides the following properties which is mineral oil free, encourages drainage and collapse of colloid stabilized foams retains high efficiency.

C.L. Smith Industrial Company CLS 111 – White Silicone is a gel-like, one component material that cures to a tough, rubbery solid excellent for for installing ceramic tiles, bonding gaskets,filling joints in ductwork and equipment housings or anywhere a tight, leakproof seal is required.

PHOTOMER® 6628 is a hexa-functional aliphatic urethane acrylate for use in UV curable adhesives, inks and coatings.

A highly persistent and cost effective oil-based defoamer specially designed for use in most emulsion polymers including EVA, VA, and acrylic formulations. Also provides excellent cost effectiveness in many adhesive applications, such as PSA, laminating, packaging, envelope & label, and construction formulations.

AGITAN DF 6432 is a defoamer for all common emulsion systems. It provides the following properties which Extremely versatile, Very fast action, Non silicone based, Effective under acidic and alkaline conditions.

PHOTOMER® 3016-20G is a moderate viscosity, non volatile, acrylic ester derived from a low molecular weight aromatic epoxy resin. The product exhibits very fast cure speed.

PHOTOMER® 5500 is a hyper branched polyester acrylate which exhibits of high functionality (12 – 15) with relatively low viscosity. It provides low shrinkage, good toughness and fast cure speed.

Magna-Tac™ TR-8899 is a one part formulated thermosetting epoxy designed to adhere metals and alloys in transformer cores, as well as electric motor rotors and stators. It is a translucent, low viscosity adhesive and is generally applied by roller, dipping or spray.

Omnistab IN 520 is an effective liquid polymerization inhibitor or storage stabilizer for photosensitive resins and monomers. It retards the self-polymerization of UV-coating and ink formulations during storage.

SureTac 1925 is a family of tackifiers that include Rosin Ester, C5 Aliphatic, C9 Aromatic, and C5/C9 Aliphatic/Aromatic, and Specialty Resin Dispersions. The product line offers a variety of softening points and may be modified to meet a specific application.

Omnirad 4PBZ is an effective Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

SureTac 1525 is a family of tackifiers that include Rosin Ester, C5 Aliphatic, C9 Aromatic, and C5/C9 Aliphatic/Aromatic, and Specialty Resin Dispersions. The product line offers a variety of softening points and may be modified to meet a specific application.

MicroCoat Technologies E52103 is an industrial adhesive that is specially formulated to mate dissimilar substrates in a rapid, precise, and permanent manner. It gives a starting point which can lead to modifications or custom designed adhesives for your particular application.

Epic Resins Epic S7226 is a two component urethane adhesive designed to give superior adhesion to a variety of substrates including FRP laminate and polyester. Epic S7226 polyurethane adhesive is supplied as two liquids and when mixed, form a paste suitable for use on vertical surfaces. Epic S7226 urethane adhesive will not sag in large diameter bead applications.

Kraton D1114 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied from North America in the physical form identified below. Kraton D1114 PT - supplied as a dusted dense pellet Kraton D1114 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

C.L. Smith Industrial Company CLS-444 is a gel-like, one component material that cures to a tough, rubbery solid excellent for for installing ceramic tiles, bonding gaskets,filling joints in ductwork and equipment housings or anywhere a tight, leakproof seal is required.

PHOTOMER® 9145 is an Unsaturated polyester oligomer diluted in DPGDA recommended for adhesion and pigment wetting.

PURETOL™ 55, odorless and colorless, is a white mineral oil with a Saybolt viscosity of 530 and a specific gravity of 0.870. This product meets US FDA CFR 172.878 and FDA 21 CFR 178.3620(a) requirements. This material meets United States Pharmacopeia (USP) - Mineral Oil requirements which is used for a variety of applications such as blending food grade lubricants and in the production of cosmetics and pharmaceuticals.

Gaskets International GDSA-5G is used in applications like OEM equipment install and replacement seal install.

Omnirad BL 724 is a photo initiator blend for curing pigmented systems for UV and UV LED Lamps at 365 - 385 nm.

PHOTOMER® 5006 is a low viscosity, amine synergist with medium amine content. A co-polymerizable tertiary amine PHOTOMER® 5006 is used as a highly efficient co-initiator. In combination with UV acrylates it accelerates the cure of UV systems.

Solventfree Aqueous, Aliphatic polyurethane dispersion based on a polyether, APEO- and TEAfree

Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

AGITAN 217 is a highly effective defoamer for all common aqueous emulsions. The product is ideal for pigmented systems as well as for adhesives based on animal glue and emulsions.