Products in Industrial & Assembly Adhesives

Optically clear, solid fused amorphous silica microspheres specially engineered for optimum dispersion in paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion and impact resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including mar and scratch resistance. Ideally suited for specialty applications where mechanical and rheological properties are required. Median particle size of 3 to 4 microns, with a particle size range of 0.5 microns to 92% passing 22 microns.

Chemitac 8 is a thermoreactive adhesive for bonding peroxide-cured silicone elastomers to rigid substrates. Chemitac 8 is a heavy metal free product.

Chemitac 80DG is a thermoreactive adhesive used with Chemitac 11 primer for bonding NR, SBR, BR, CR, NBR, HNBR, IIR, CIIR, BIIR, CSM and EPDM to rigid substrates. It can also be used as a one-coat adhesive for bonding KTL-treated substrates and textile fibers.

IGI® 1303A is a fully refined high-melt paraffin wax that is used in a variety of applications including: hot-melt adhesives, investment casting, rubber products, and textiles.

U-212 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

Viplex LS is a low viscosity diluent of PU and epoxy systems with excellent compatibility.

FLASHBOND™ UV-3607HTis a 1-component, UV/Thermal cure adhesive & sealant. This material can cure under moderate intensity UV light as well as elevated temperatures for shadowed areas. Its low viscosity is ideal for coating, capillary action, and doming applications. Unlike traditional dual cure epoxy systems which need light + heat, UV-3607HT can cure either with UV/LED light or with heat.

XtraBond® 9500 is a multi-purpose advanced polymer sealant. The product’s one component design ensures that it cures rapidly when exposed to atmospheric moisture to form a durable bond and can be applied in a wide range of temperature and weather conditions (-40°F to 140°F). It is engineered to deliver aggressive adhesion with the most common construction substrates. These unique features make it the sealant of choice for professionals everywhere.

NovaCentrix manufactures silver nanopowder with average particle size of 25 nm, with a specific surface area of 23 m2 /gm. Silver nanopowder is used in electrically conductive inks for inkjet and flexographic printing. Silver has also been shown to have antimicrobial properties. Nanopowder offers tight size control, high purity, and excellent dispersibility. A top performer for many applications, including, photovoltaics, displays, energy storage, RFID and smart packaging. Also used in electrically conductive inks and adhesives for inkjet and flexographic printing.

U-425 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

Aromatic Polyester PU DMF-Free & TOL-Free

RT2304 is medium ethylene Copolymer which is mainly used in automotive head lamp bonding, window sealant, carpet backing, pallet stabilization.

CAPXIDAN® HD is a Modified Copolymer produced with a proprietary, specialized formulation. It is designed to be coextruded over Wood-Plastic Composite (WPC) deck boards to provide moisture, stain, wear resistance,esthetics, durability at elevated temperatures, and unprecedented adhesion to the WPC substrate. CAPXIDAN® HD is a two-component capstock system. The CAPXIDAN® resin should be extruded together with a specific synergistic additive masterbatch in the recommended proportion of 98:2 by weight.

RT9721 is Formulated Butene Copolymer which is mainly used in Automotive load floor assembly, Pipe wrap, Specialty packaging, Mattress assembly, Office furniture, Foam bonding.

Aromatic Polyether PU

Turbo Lock Series 11 HT is a fast curing, removable, medium strength, high temperature, anaerobic thread-locking compound for bonding and sealing threads. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals. Disassembles with hand tools.

NYCOBOND XN-187 is a flexible Nylon terpolymer suitable for extrusion and injection molding applications. It has a lower melting point than traditional Nylons, excellent processability, and yields extremely tough and resilient finished articles.

XtraBond® 250 is a 100% acetoxy-based, high performance silicone engineered for applications that require a 100% silicone solution. The product is formulated as a one component, mildew resistant sealant that is permanently flexible and offers excellent adhesion.

Optically clear, solid fused amorphous silica microspheres specially engineered for paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion resistance, reduce shrinkage, improve adhesion and impact resistance, and enhance surface qualities including mar and scratch resistance. The Sunspheres™ 15.0 have a median particle size of approximately 15.0 microns, with 90% of particles passing 45 microns.

NBR 2645 NT is essentially an acrylonitrile (27-30%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Medium content of acrylonitrile, heightened oil resistance.

BG201 is formulated APAO polymer which is mainly used in automotive load floor assembly, headliner components, automotive vibration/sound deadening, carpet backing, specialty packaging, woodworking, foam bonding.

Fushun Huaxing Petroleum Chemical HX-C9 100 is produced through the process of fractionation, thermal polymerization, flash evaporation and molding with the carbon nine as the raw material from ethylene fragmentation. This product is light yellow-brown granules, flakes or bulk solids with better transparency, gloss, compatibility, dissolvability of water, insulation, and excellent solubility and stability to the acid-base chemicals, and good bond and good thermal conductivity and so on.

IsoMelt™ HMPUR 5 is a long assembly time; moisture-curing; hot-melt polyurethane adhesive. The adhesive is solid at ambient temperatures. The adhesive is applied in the molten form and cures in the presence of moisture to form a tough; durable bond. The IsoMelt™ HMPUR 5 bonds to a wide variety of substrates; but at least one substrate must be gas permeable. Typical substrates include wood and wood products; most foams; primed metals; FRP; and other plastics with Dyne levels greater than 38 dynes. At 3-mil thickness; the adhesive transfers to the opposing substrate at least through five minutes of assembly time; prior to nipping.

Kolon Industries HIKOREZ® T-3095 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. This resin is used together with natural rubber for solvent-based pressure sensitive adhesive (SBPSA), and offers excellent compatibility with Styrene-Butadiene-Styrene copolymer (SBS) and is used as tackifier for hot melt pressure sensitive adhesive (HMPSA). The major usages are tackifier for solvent based pressure sensitive adhesive(SBPSA), hot melt based pressure sensitive adhesive(HMPSA) and hot melt adhesive(HMA). .

MicroCoat Technologies E52101 is an industrial adhesive that is specially formulated to mate dissimilar substrates in a rapid, precise, and permanent manner. It gives a starting point which can lead to modifications or custom designed adhesives for your particular application.

Akron Coating and Adhesives ACA-30-016 is a heat activated latent cure waterborne adhesive. The adhesive will work with plastic over-molding or extrusion onto the metal. Pre-heating metal components to 200°F may be necessary in injection molding applications. The adhesive is unique in that it has a latent cure mechanism that cures the adhesive during heat activation providing salt-water and solvent resistance.

ORIBAIN™ BPS 5513 is an adhesive used for PET Tape, middle-high peel and cutting performance applications.

PHOTOMER® 3319 is a low viscosity di functional aliphatic epoxy acrylate which exhibit of excellent reactivity and chemical resistance.

PHOTOMER® 4812 is a mono functional acrylate monomer, used as flexibilizing agent in coatings and inks. It will also increase water resistance properties due to its hydrocarbon backbone.

Calprene 719 is a new 70/30 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a radial structure.This product is stabilized with a non-staining antioxidant system, essentially gel free with a very clear color.Calprene 719 is a BHT* and nonylphenol free SBS, FDA approved and suitable for food contact applications.Calprene 719 is supplied in porous crumb.*(BHT content in pure polymer less than 30ppm).

UNI-REZ 1533 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 1533 polyamide resin provides fast solvent release, good gel resistance, and excellent grease resistance in flexographic / gravure inks for plastic substrates.

SureTac 1770 is a family of tackifiers that include Rosin Ester, C5 Aliphatic, C9 Aromatic, and C5/C9 Aliphatic/Aromatic, and Specialty Resin Dispersions. The product line offers a variety of softening points and may be modified to meet a specific application.

Guangxi Zhongchang Resin RPF90 series resin series are made from modified rosin with special process. Provide excellent dissolvability in low carbon alcohol, light color aging resistance and light resistance.Widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux.

ALOLT 90DLS is a fine precipitated aluminum hydrate mainly used as a flame retardant and filler in different areas.

PHOTOMER® 6621 is a tin free, hexafunctional aliphatic urethane acrylate oligomer which provides very fast cure performance in addition PHOTOMER® 6621 exhibit high hardness and solvent resistance