Products in Other Adhesives & Sealants Applications

SIMALA 321-HI / 321/ is a super instant tack, high yielding. high temperature resistant, and fast-drying one-part water-based adhesive that can be used in a wide variety of applications. while primarily designed for the bedding industry (pillow tops, foam layers, foam encased). Simalfa 321.HT has exception characteristics that allow foam and fabrics to instantly bond to many rerent materials including wood and plastic.

Epic Resins Epic S7422 is a two component epoxy compound designed with a short pot life and anti-sag properties. Epic Resins S7422 is recommended in applications where quick turn over of parts is desired as well as good chemical resistance is needed.

Epic Resins Epic S7068 is a two component, high strength, structural epoxy resin adhesive designed for bonding fiberglass reinforced plastics and metals. This epoxy adhesive bonds well to most SMC formulations with little or no surface preparation. In addition, S7068 offers mix ratio flexibility and good peel strength.

Tensorgrip® 115 Polystyrene Safe Spray Adhesive is a specially formulated adhesive that provides super tacky adhesion for foam and fabric applications. Tensorgrip® 115 remains tacky for the long term and never sets hard. Tensorgrip® 115 is safe for use on polystyrene and Provides single sided bonding of webbing to foam, fabrics and cork.

Fasc-Tac™ 910P is a Synthetic Rubber PSA used in high peel applications and high tack applications.

Bay Composites BC-628 is a graphite adhesive that can be used to bond graphite foil to graphite rigid insulation, graphite foil to carbon composite, carbon composite to graphite rigid insulation, and graphite to graphite.

LAVIOSA VISCOGEL™ S4 is a new high performing, highly effective rheological additive for solvent-borne systems of low to medium polarity that gives excellent thixotropic effect, sag control, good leveling and prevents pigments from long-term storage settling. The nature of LAVIOSA VISCOGEL™ S4 is a highly purified bentonite clay, organically modified with a quaternary alkylammonium compound.

Epic Resins Epic RM2001 is a single component 100% solids moisture cure adhesive designed to be used with roll coaters for various panel bonding applications. Epic RM2001 has a work time of 2-3 hours followed by a quick cure, enabling the user to turn over a press quicker than other moisture cure adhesives.

Vosschemie Benelux SL Epoxy Filler Universal Gray A+B is a 2-component epoxy finishing putty for filling irregularities and holes in polyester, epoxy or wood for both above and below the waterline of the boat.

Epic Resins EPIC S7450 is a two component urethane adhesive designed with a long pot life and a convenient 1:1 by volume mix ratio. Designed with matching viscosities on both sides of the product, S7450 is extremely easy to mix and dispense through many equipment configurations.

LAVIOSA VISCOGEL™ B4 is a rheological additive for solvent-borne systems of low to medium polarity that gives thixotropic effect, sag control, excellent leveling and prevents pigments from long-term storage settling. The nature of LAVIOSA VISCOGEL™ B4 is a bentonite clay, organically modified with a quaternary alkylammonium compound.

Defoamer for water-based coating systems, free of silicone. SCHWEGO foam 6325 can be used in emulsion paints, water-based coatings, silicate paints, adhesives and plasters.

Vosschemie Benelux YC Super Epoxy 30 GR is a two-component, multi-use epoxy resin adhesive with good chemical and temperature resistance. After a short curing time it already has a high adhesive power for bonding different materials.

Epic Resins Epic S7398 is a two component urethane adhesive designed to have excellent adhesion to various plastics including ABS. Epic S7398 has excellent thermal shock properties and remains flexible over a wide temperature range.

LAVIOSA VISCOGEL™ X4 is a new high performing, highly effective rheological additive for solvent-borne systems of low to medium polarity that gives excellent thixotropic effect, sag control, good leveling and prevents pigments from long-term storage settling. The nature of LAVIOSA VISCOGEL™ X4 is a highly purified bentonite clay, organically modified with a quaternary alkylammonium compound.

Fasc-Tac™ 916P is a SIS/SB Rubber PSA used in high peel applications and high tack applications.

Epic Resins Epic RM2000 is a single component moisture cure adhesive with a moderate viscosity and a 20-30 minute work time. Epic RM2000 bonds well to a variety of substrates including PVC, rubber matting, aluminum and steel. Epic RM2000 develops ample green strength within hours after application.

Epic Resins Epic S7400 A/B is a two component polyurethane adhesive designed with a convenient 1:1 by weight or volume mix ratio and a fast room temperature cure. Epic S7400 urethane adhesive offers many features including excellent adhesion, outstanding elongation, and greater stress endurance than other, more rigid urethane adhesives.

Epic Resins Epic RM2002 is a single component 100% solids moisture cure adhesive designed to be used with roll coaters for various panel bonding applications. Epic RM2002 adheres well to many substrates including PVC, and primed aluminum.

Sonlok® 3641 is a medium strength anaerobic bearing compound for continuous working temperatures up to 300°F.

LAVIOSA VISCOGEL™ S8 is a new high effective high performing rheological additive for solvent-borne systems of low to medium polarity, that gives excellent thixotropic effect, sag control, film thicknesses, leveling and prevents pigments from long-term storage settling. The nature of LAVIOSA VISCOGEL™ S8 is a high purified bentonite clay, organically modified with a quaternary alkylammonium compound.

Epic Resins Epic S7191 is a two component urethane adhesive system. Epic Resins S7191 is a quick setting adhesive designed to be flexible for use in applications where the completed assembly will be required to bend without breaking.

LAVIOSA VISCOGEL™ ED2 is a newhigh performing, highly effective rheological additive for solvent-borne systems of moderate to high polarity. that provides thixotropic effect, sag control, excellent leveling and prevents pigments from long-term storage settling. The nature of LAVIOSA VISCOGEL™ ED2 is a highly purified bentonite clay, organically modified with a quaternary alkylammonium compound. Unlike most of the other conventional organoclays, LAVIOSA VISCOGEL™ ED2 is selfactivating and easily dispersible, hence simple and convenient to use.

Epic Resins Epic RM2003 is a 100% solids moisture cure adhesive that cures rapidly after a slight water mist. Epic RM2003 is designed to be used with a bead applicator in panel bonding applications. Epic RM2003 adheres well to many substrates including wood, PVC and primed aluminum.

Vosschemie Benelux SL Epoxy Light Primer White A+B is a high quality 2-component epoxy primer which is an excellent preparation coat for paints and topcoats.

Defoamer for water-based coating systems, VOC- and silicone free. SCHWEGO foam 8325 can be used in emulsion paints, water-based coatings, silicate paints, adhesives and plasters.

Vosschemie Benelux SL Epoxy Primer Anti-Corrosion A+B is a high-quality 2-component solvent-free epoxy primer on an amine basis. The cured layer has a very high resistance capacity and is a good barrier against water. The cured layer does not allow water (vapor) to pass through.

LAVIOSA VISCOGEL™ S7 is a new high performing, highly effective rheological additive for solvent-borne systems of medium to high polarity. In a typical coating system (paints and printing inks), LAVIOSA VISCOGEL™ S7 gives thixotropic effect, sag control, excellent leveling and prevents pigments from long-term storage settling. The nature of LAVIOSA VISCOGEL™ S7 is a highly purified bentonite clay, organically modified with a quaternary alkylammonium compound.

Interplastic Corporation PA-160-PMMN (medium density) is easy to trowel and spread with no air voids.

Interplastic Corporation PA-176-PMMF is a isophthalic adhesive designed for resistance to fuels.

Interplastic Corporation PA-170-PMHN is a high density polyester isophthalic adhesive.

TRECORA POLYETHYLENE WAX – CWP400 is a High Density Polyethylene Wax intended for use in specifically Hot melt adhesives intended for the packaging industry where heat stability and heat resistance are required.

Interplastic Corporation PA-827 (low Density) has a lower density version of Proven PA-160 Product Line.

Interplastic Corporation PA-181-VHMN (vinyl ester) is a vinyl ester resin base for corrosion resistance and hydrolytic stability.

Interplastic Corporation PR-235-VHLN are ideal for industrial or construction markets that require fire resistance.

Hernon Fusionbond® 373 is a two component, room temperature curing, 10:1 ratio, methacrylate adhesive system. This adhesive is low halogen and phthalate-free. Fusionbond® 373 forms resilient bonds and maintains its strength over a wide range of temperatures. Fusionbond® 373 is suitable for bonding a variety of substrates with a minimum of surface preparation. Recommended substrates: PVC, acrylic, ABS, stainless steel, aluminum and some types of fiberglass. Fusionbond373 provides toughness at temperatures from -67 to 250°F.