Products in Flexible Packaging Adhesives

VIVAPUR® Alginate FD 155 is a sodium alginate in form of a creamy-white powder. With the addition of higher valent ions (e.g. Ca2+) it can be used to form gels or biobased and transparent films, which provide oil and oxygen barrier properties. VIVAPUR® Alginate FD 155 is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex.

VIVAPUR® Alginate FD 176 is a sodium alginate in form of a creamy-white powder. With the addition of higher valent ions (e.g. Ca2+) it can be used to form gels or biobased and transparent films, which provide oil and oxygen barrier properties. VIVAPUR® Alginate FD 176 is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex.

FluoroGrip® -E- ECTFE is an oxy-halopolymer of ethylene-chlorotrifluorethylene modified to incorporate hydroxyl groups with an acrylic or silicone pressure sensitive adhesive.

VIVAPUR® Pectin LC-S18XH is a water solvable pectin with a low degree of methoxylation in form of a beige powder. It can be used to form a thermo-stable gel or bio-based transparent coatings with oil and oxygen barrier properties upon the addition of higher valent ions (e.g. Ca2+). VIVAPUR® Pectin LC-S18XH is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. For an EU usage please consider food categories and where required maximum levels listed in Reg. (EC) No 1333/2008.

VIVAPUR® HPMC K4M is a medium viscosity hydroxypropyl methyl cellulose in powder form. It is solvable in water and forms a reversible gel above a specific gelling temperature. VIVAPUR® HPMC K4M can also be used to increase tack and form transparent and flexible films which show oil barrier properties. VIVAPUR® HPMC K4M is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. For an EU usage please consider food categories and maximum levels listed in Reg. (EC) No 1333/2008.

Kolon Industries SUKOREZ® SU-100 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers, such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-100 is waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

Velsiflex® 342 is one of the most popular liquid plasticizers. It is a high-solvating plasticizer containing mostly dipropylene glycol dibenzoate. It is used in a wide variety of applications, including caulk, adhesives, resilient flooring, PVC-coated fabrics and artificial-leather cloth. In PVC, it acts as a medium- viscosity high solvator that saves energy and improves process ability. Vinyl applications using Velsiflex 342 have excellent resistance to extraction from solvents and oils. It also works with vinyl to make it UV – light-degradation resistant and stain resistant.

Kolon Industries SUKOREZ® SU-110S is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-110S is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Kolon Industries SUKOREZ® SU-230S is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-230S is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers, and metallocene polyolefins and APAO.

Kolon Industries SUKOREZ® SU-210 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-210 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

AGITAN P 803 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 803 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 803 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.

UNI-REZ 2226 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

Kolon Industries HIKOREZ® T-1095 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. This resin offers excellent compatibility with Ethylene-Vinyl-Acetate (EVA) or Styrene-Isoprene-Styrene copolymer (SIS), and is mainly used as tackifier for hot melt pressure sensitive adhesive (HMPSA) and hot melt adhesive (HMA). HIKOREZ® T-1095 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are hot melt based pressure sensitive adhesive(HMPSA), especially Stryene-Isoprene-Styrene (SIS) based PSA. And this grade also can be used as tackifier for hot melt adhesive(HMA), because of its good compatibility with base polymer such as EVA. .

UNI-REZ 106/1 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 106/1 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

UNI-REZ™ 2501 is a thermoplastic polyamide resin. Used in high gloss paints. Offers a high degree of thixotropy. Possesses very good flow and leveling characteristics.

AGITAN P8850 is a cost effective and economical powder defoamer specifically designed for use in grout, self-leveling compounds and most other powdered building materials. It combines a cutting edge, unique composition with ease of handling to create additional value to the end user.

TexCross IB 25 is a Crosslinker for the production of latently-reactive adhesive films.

SYLVALITE RE 100S rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 1005 exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

AGITAN 381 is a highly effective, low-emmision defoamer and has a wide formulation lattitude due to its ease of emulsification. It can be effective in clear coats, pigmented systems, low viscosity systems and emulsion manufacturing.

V-TAC™ 8501

SYLVALITE RE 105XL rosin ester is very light colored and stable with moderately high softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. Adhesives formulated with SYLVALITE RE 105XL resin achieve the lightest color among the rosin ester product range.

UNI-REZ 2940 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2940 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

POLYTONE™ AP 111 is a heat reactive alkyl Phenolic resin formulated for use in Neoprene rubber adhesives. It imparts low initial viscosity and viscosity stability to adhesives of this type.

UNI-REZ 2294 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2294 has a moderate softening point and low viscosity which allows for a lower application temperature and fast set.

WÜKONIL® PW is an aqueous dispersion for use in varnish- and paint systems WÜKONIL® PW is an aqueous dispersion for use in varnish- and paint system.WÜKONIL® PW modifies the following properties of paint- and varnish formulations:. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

SYLVATAC RE 85 rosin ester is a stabilized glycerol ester of Tall Oil Rosin. The thermal stability and polymer compatibility of this resin make it useful in a wide variety of adhesives. The low Tg of SYLVATAC RE 85 rosin ester enables adhesive performance at lower temperatures.

HIGREE™ CL1104 C5 hydrocarbon resin is a low molecular weight, narrow molecular distribution, light color thermoplastic resin produced from aliphatic petroleum-derived monomers .With good infinity with a wild range of polymers. Due to its good tack and cohesive ,it is a good tackifier for hot melt adhesives and pressure sensitive tapes.

AGITAN P 845 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 845 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 845 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

POLYTONE™ AP 110 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.

AGITAN 305 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.

UNI-REZ 2215 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

TAFIGEL AP 30 is recommended as thickener for anionic and non-ionic systems. It is excellent sagging resistance, can be used at pH of up to 13, very high water retention in paper coatings.

AGITAN 700 is a modification of AGITAN 701 with an improved emulsifiability.AGITAN 700 therefore is easiliy emulsifiable. It is particularly effective in water reducible systems and aqueous gloss emulsion systems.

AGITAN DF 677 is a defoamer for all common emulsion systems. It provides the following properties: Extremely versatile; Good compatibility; Effective over a wide pH range.

AGITAN P 804 is recommended in such cases where oil based defoamers do not work. It is used in dry blends which are dissolved in water before application. The addition of AGITAN P 804 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.