Products in Cooling & Climate: Automotive Applications

Starpylen M1000 is an Unfilled Polypropylene, Injection Molding Resin

TRIEL® 5407EF is a Thermoplastic Polyester Elastomer (TPEE) product. It is available in Asia Pacific, Europe, or North America.

Pentamid B GV50 H RC black is a normal viscosity, heat stabilized polyamide 6, 50% glass fiber reinforced, recompound.

Pentamid AB S GV60 H natural is a low viscosity, heat stabilized polyamide 66+6,60% glass fiber reinforced.

Pentalloy BP GV30 H natural is a PA6+PP-alloy, 30% glass fiber reinforced, heat stabilized, resistant to corrosion.

Paychlor K-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Pentamid L GV30 H black is a normal viscosity, 30% glass fiber reinforced polyamide 12, heat stabilized.

linear PPS, 20% glass fiber reinforced, laser weldable, natural

Pentamid AB S GV50 H natural is a low viscosity, heat stabilized polyamide 66+6, 50% glass fiber reinforced.

Exac PTFE (MOLDED) is a Polytetrafluoroethylene (PTFE) product. It is available in North America. Applications of Exac PTFE (MOLDED) include engineering/industrial parts, aerospace, electrical/electronic applications, military applications and automotive.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Product Information: BP Flex Thermoplastic Elastomers are based on SEBS polymers (Styrene-ethylene/butylene-styrene) providing increased oxidation and weather resistance, higher service temperatures, and increased processing stability.Features: Low Temperature Performance, Excellent Tensile Strength, High Reprocessable Valves - seals, Grommets, Under Hood Applications Processing Method: * Injection Molding Ozone resistance, Superior

Miracll Chemicals E 155D is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Product Information: BP Flex TPV's are partially vulcanized thermoplastic elastomers designed to meet higher end applications that require the following performance criteria.Features: Higher service temperatures ( Under hood applications) For applications that require Increased chemical and oil resistance Valves - seals, Grommets, Under Hood Applications Reprocessable Processing Method: Injection Molding and Some Extrusion Applications Chemically bonds with polyethylene and polypropylene for overmold applications - Grommets, pads

RE-FLEX® 470A is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

Pentamid A S GV25 H FR natural is a low viscosity, heat stabilized polyamide 66, 25% glass fiber reinforced, flame retardant.

Normal viscosity polyamide 6, modified with 25% PTFE

Starpylen MFB44S is a glass Beads, Glass Fiber Reinforced, Polypropylene Injection Molding Resin heat stabilised ( also known as Starpylen WS 2020VK S37.7 )

Pentamid A GV30 HYD2 RC black is a normal viscosity, heat and hydrolysis stabilized polyamide 66, 30% glass fiber reinforced, recompound.

Paracril B is a copolymer of butadiene and acrylonitrile, hot polymerized with a non-staining stabilizer.

Pentamid B GV50 H natural is a normal viscosity, heat stabilized polyamide 6, 50% glass fiber reinforced.

Pentamid AB GV30 H black is a normal viscosity, heat stabilized polyamide 66+6, 30% glass fiber reinforced.

Pentamid A GV15 MA25 H black is a normal viscosity, heat stabilized polyamide 66, 15% glass fiber and 25% mineral reinforced.

Polycarbonate/Acrylonitrile Butadiene Styrene, thermally and electrically conducting grade.

Paracril 2840 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Miracll Chemicals E 175D is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Pentamid A GV50 H natural is a normal viscosity, heat stabilized polyamide 66, 50% glass fiber reinforced.

Paychlor D-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Exac CTFE is a Polychlorotrifluoroethylene (PCTFE) product. It is available in North America. Applications of Exac CTFE include engineering/industrial parts, aerospace, electrical/electronic applications, automotive and medical/healthcare.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Domamid® 66G50HR1 is polyamide 66, 50% glass fiber reinforced, hydrolysis stabilized, is used for injection molding.

Domamid® XS 66V50H2 by DOMO Chemicals is comprised of Polyamide 66. It is commonly used

Pentamid A GV15 H RC black is a normal viscosity, heat stabilized polyamide 66, 15% glass fiber reinforced, recompound.

POM copolymer unreinforced, medium viscosity

Starpylen MX05039 is a Mineral Filled Polypropylene Injection Molding Resin

Exac PFA is a Perfluoroalkoxy (PFA) product. It is available in North America. Applications of Exac PFA include engineering/industrial parts, electrical/electronic applications, aerospace, automotive and medical/healthcare.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Starpylen MCR13S is a 15 % Carbon Fiber Reinforced Polypropylene Injection Molding Resin

Miracll Chemicals E 165D is a polyester-based thermoplastic polyurethane used for wide variety of applications.