Products in Automotive: Industrial Applications

BARLOG plastics GmbH Kebablend® / EC FE 190501 TPE is a TPU with a Shore hardness of A 87. It is characterized by good hydrolysis resistance, very good wear and abrasion resistance as well as good damping and resilience behavior. It also has good electrically conductive properties.

Sylvin™ 9796-66 Pink 6319 is a vinyl compound formulated for molded gas pump handles.

2B-5A Activated Zeolite is composed of Zeolite 5A activated, v .

Nilit NILAMID® B3 HHR GF30 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, heat and hydrolisis stabilized.This compound is intended for injection molding.NILAMID® B3 HHR GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Thermec™ K 3350CF30 is with medium viscosity, 30% glass fiber reinforced, is used for injection molding.

EnPom™ F3054 by EnCom Polymers is comprised of Polyacetal Homopolymer. It is commonly used EnPom™ F3054 is certified as UL Flame Rated.

Sylvin™ 9796-66 Green 3227 is a vinyl compound formulated for molded gas pump handles.

MM-PP HI22 is PP 40% mineral filled by Injection molding Processing

Envir® PA6G3OHL-BK0701 is a 30% glass fiber reinforced nylon 6 molding resin, it is heat stabilized and hydrolysis resistant. 6G30HL is optimized for properties and processability. It is provided black in color.

PP Homopolymer Industrial Black 40% Talc filled

PP Homopolymer Industrial Black No filled

BARLOG plastics GmbH Kebablend® / WR 01/2202 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a very high elongation at break.

BARLOG plastics GmbH Kebablend® / WR 01/1125/2110 is a special compound based on POM that combines high strength and rigidity with good sliding behavior and high wear resistance.

PP Stabilized Copolymer Industrial Black 25% Talc filled

2B-ATAB45FP is composed of Micronized Tabular Alumina, Diallyluminium trioxide, Al2O3 .

Domamid® 66 is polyamide 66, is used for injection molding.

Sylvin™ 9796-66 Green 3217 is a vinyl compound formulated for molded gas pump handles.

Nilit NILAMID® B3 H CF20 is a Polyamide 6 (Nylon 6) compound, 20% carbon fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® B3 H CF20 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Sylvin™ 83077-80 Natural is a highly filled vinyl compound formulated for extruded mlv sound barrier applications.

Silplus™ 30 AS, 30 duro hardness heat cured silicone rubber compound for compression molding processes, offers a good anti-static property to silicone rubber products.Key Features and Typical Benefits Good anti-static property Colorable translucent appearance Excellent mechanical properties and heat resistance Excellent processability Easy coloring Potential Applications Mobile jacket, keypad cover, keypad watch Consumer goods, novelty, accessory Industry roller, rubber sheet Automobile parts.

Dynacast Industrial Products Butadiene Rubber-BR has low hysteresis, good temperature flexibility and high abrasion resistance under severe weather conditions. It is used in blends with SBR and natural rubber. Butadiene rubber has poor processing properties and poor tear properties.

The Addisil™ IND 1080 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

Nilit NILAMID® A2 HH M25 is a low viscosity Polyamide 66 (Nylon 66) compound, 25% mineral filled and high heat stabilized.This compound is intended for injection molding.NILAMID® A2 HH M25 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Next PC CX-02WH is PC UnFilled White Compound.

Sylvin™ 9796-66 Green 3152 is a vinyl compound formulated for molded gas pump handles.

CarbonResin™ CE 220 is a high performance material with excellent strength, stiffness and thermal stability that is a good choice for use at elevated temperatures. CE is comparable to glass-filled nylon.

Sylvin™ 8303-60 Black is a flexible vinyl compound formulated for automotive applications that require good tear resistance.

Nilit NILAMID® A3 H CF20 is a Polyamide 66 (Nylon 66) compound, 20% carbon fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 H CF20 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

TABOREN® PR 65 T 10S-089 is a PP/PE, Filler: Mineral filler, Stabilization: Antioxidant + UV + Anti-scratch

Ketoprix™ EKT33G3L are thermoplastic aliphatic polyketone compounds where the polyketone base polymer consists of perfectly alternating α-olefins and CO to give the 1,4-diketone polymer backbone structure. To this base resin, fiber reinforcement, additional thermal stabilizers and lubricants are added to achieve desired mechanical performance and to assist in injection molding.

68% Fluorine terpolymers formulated for improved chemical resistance. IF compounds are good choices for fuel applications.

PP Homopolymer Industrial Black 20% Talc filled

Nilit NILAMID® B3 GCF2006 is a Polyamide 6 (Nylon 6) compound, 20% glass fiber and carbon fiber reinforced.This compound is intended for injection molding.NILAMID® B3 GCF2006 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

KODAK ESTAR™ HIGHLY CONDUCTIVE (HCF) FILMS 6RF1-931T is an optically clear and highly conductive flexible film. It is a high-quality polyester film (PET) featuring a proprietary conductive polymer (PEDOT/PSS) coated in-line during the manufacturing process.

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

Domamid® XS 66G65H1 is a polyamide 66 alloy, 65% glass fiber, heat stabilized, is used for injection molding.