Products in Fuel Systems: Wires

Paracril OZOM65 is a pre-fluxed blend of NBR/PVC containing 30% PVC.

Paychlor D-58 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paracril OZO3341 is a pre-fluxed blend of NBR/PVC containing 30% PVC and 28% BAN NBR base polymer.

GuangDong Sky Bright One Pack Stabilizer is suitable for different products such as foaming board, compound for wire and cable, edge banding strip, fitting, hose, profile, rigid conduit and pipe, and SPC floor materials.

Miracll Chemicals E 70 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Sylvin Technologies Sylvin™ 5132-70UV Clear is a clear vinyl compound formulated for wire insulating applications such as speaker wire, booster cable, and extruded tubing. This compound contains an ultra violet stabilizer and can be color matched to a variety of colors.

Paychlor K-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Miracll Chemicals E 155D is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Shintech SE-1200 is a polyvinyl chloride homopolymer (PVC).

Sylvin Technologies Sylvin™ 5132-75UV Clear is a clear vinyl compound formulated for wire insulating applications such as speaker wire, booster cable, and extruded tubing. This compound contains an ultra violet stabilizer and can be color matched to a variety of colors.

Hangzhou Hi-Tech Fine Chemical ATH-6S is a flame retarding for a variety of rubber and plastic products, such as mining transport belt, hose, rubber, carpet, rubber gaskets, wire and cable materials and sheathing, building materials, especially for blocking free foaming processfuel in the production of the bubble can be given to the characteristics of products, flame retardant, smoke, anti-static.

Miracll Chemicals E 175D is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Paychlor D-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

STARCOM S/1000 is a PVC grade product.

Miracll Chemicals E 165D is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Sylvin Technologies Sylvin™ 5132-75UV Red 6281 is a vinyl compound formulated for wire insulating applications such as speaker wire, booster cable, and extruded tubing. This compound contains an ultra violet stabilizer.

Miracll Chemicals E 195 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

ALTAFLUOR® 400 PFA (perfluoroalkoxy) is the product of choice for applications involving extreme chemical resistance combined with high temperature exposure. Although PFA is available in a variety of resin grades, the tubing is made exclusively from the highest molecular weight resins available giving it superior physical properties making it suitable for even the most demanding applications. Altafluor 400 Series PFA does not impart taste or odor and is compatible with flare or conventional type fittings.

Apcoflex® N684 is a cold polymerized, medium ACN containing acrylonitrile butadiene co-polymer. It contains non-staining antioxidant.

Paychlor S-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

A non-color degradation and non-staining supper accelerator for rubber, it is used in making cables, tires, rubber hoses and belts, brilliant and transparents, rubber shoes and products of heat resistance, etc.. TMTM is regulated for use in articles in contact with food as specified under FDA 21 CFR177.2600, 175.105 and under BgVV XXI, Categories 1-4 and”Sonderkategorie”.

Paychlor D-55 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Miracll Chemicals E 85 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Silanogran PV is the 50 % granular form of a trimethoxy-silyl-group containing low molecular poly-butadiene (formerly Polyvest 25) on a mineral carrier. The pure liquid polymer is sticky and highly viscous. Our granular form provides easier handling, avoids inaccuracy and insecurity while dosing and incorporating the material into the rubber compound.

Miracll Chemicals E 95 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Paracril OZO3996 is a pre-fluxed blend of NBR/PVC containing 40% PVC.

KPC® KLC-45G by Kadakia Plastics and Chemicals is a general purpose, flexible polyvinyl chloride (PVC) grade. Is suitable for processing by profile extrusion. Possible applications could be AV, AVS, AVSS wiring harness, sleeves, door trims, fuel tubes, horn pads, knobs, weatherstrips, roof garnish, quarter glass profiles and profile end molding in automotive industry. KPC® KLC-45G complies with IS, JIS, JASO, SAEJ and Underwriters Laboratory (UL).

KPC® KT-LT by Kadakia Plastics and Chemicals is a low temperature (-45 °C) polyvinyl chloride (PVC) and nitrile butadiene rubber (PVC/NBR) alloy. Can be processed by co-extrusion. Possible applications of KPC® KT-LT could be could be seals, footwear upper & soiling, hose and tubing, compressed air hose, fuel line hose, building & construction, gaskets, weatherstrips, cables in arc welding, appliance and industrial.

Paychlor K-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

ALTAFLUOR® 100 PTFE has the broadest temperature range of any fluoropolymer and can resist highly corrosive liquids and gasses even at elevated temperatures. The smooth surface finish, lowest coefficient of friction and lubricity make it ideal for bushing or bearing applications.

Manifattura Cattaneo PVDF is a Non-toxic semi-crystalline thermoplastic with high chemical resistance. Suitable for contact with food.

STARCOM S/2000 is a PVC grade product.

Epoxidized soybean oil/ESBO can be used in most products of polyvinyl chloride, such as all kinds of food package materials, medical products, different kinds of films, sheet materials, tubing, sealing strip of refrigerator, artificial leather, plastic wallpaper, electrical wires and cables and other commodity plastic products .It also can be used as special

INOFLON® GN7045 has high dielectric strength with good dimensional stability.

INOFLON® GN7500 has high dielectric strength with good dimensional stability.

Shintech SE-1300 is a polyvinyl chloride homopolymer (PVC).