Products in Interior: Polyacetal Homopolymer (POM)

BARLOG plastics GmbH Kebaform® / C 901 TS is a specially modified type, which is characterized by excellent sliding and wear properties. Despite the highly efficient modification with PTFE and a special silicone oil, Kebaform® / C 901TS has excellent mechanical properties. Kebaform® / C 901TS is used wherever high demands are placed on wear resistance, uniformity of friction behavior under changing conditions and low noise levels, and at the same time the mechanical property profile of a technical construction material is required. Kebaform® / 901TS is particularly suitable for sliding pairings with changing operating conditions, e.g. B. When starting behavior without stick-slip effect is just as required as high wear resistance over the entire service life.

Michael Day Enterprises AH10 is a 1 melt flow acetal homopolymer.

JURAPOM® X60 025 NC00 1000 is a pom-c, %20 glass bead, natural (Heat stab.) for injection application.

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

Michael Day Enterprises AH90 is a 18-20 melt flow acetal homopolymer.

Polyoxymethylen +25% fiber glass abbreviated as POM+GF25 used in Automotive, Terminal Blocks, Plugs & Sockets applications.

BARLOG plastics GmbH Kebaform® / C 904 UR is a normal viscous, elastomer-containing injection molding grade based on Kebaform® / C 90.0. The increased elastomer content results in a very high level of toughness. The absorption capacity for high dynamic loads is excellent. Fields of application are e.g. The outsert technology, rollers, belt buckles, transport chains, fastening elements, etc.

Polyoxymethylen abbreviated as POM.

POM copolymer unreinforced, medium viscosity

POM copolymer unreinforced, highly viscous for injection molding and extrusion processing

Michael Day Enterprises AH50 is a 9 melt flow acetal homopolymer.

POM copolymer unreinforced, dry blend with color masterbatch green, medium viscosity for injection molding

Ziaform® H is already used in the automotive, E&E, construction and consumer goods industry, the recyclates / ZIA compounds from MKV offer a real alternative to virgin material.

POM copolymer unreinforced, medium viscosity, UV stabilized

POM copolymer unreinforced, medium viscosity for injection molding

POM copolymer unreinforced, medium viscosity, worldwide drinking water approvals

POM copolymer unreinforced, medium viscosity, optimized crystallization behavior

BARLOG plastics GmbH Kebaform® / C FE 161105 is a tribologically optimized POM copolymer which, due to its property profile, is particularly suitable for applications that require good sliding and wear behavior.

POM copolymer unreinforced, medium viscosity, UV stabilized, reduced formaldehyde emission for applications in the vehicle interior, suitable for unpainted high gloss surfaces.