Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Formulations
Food & Nutrition Formulations
Formulations
Cosmetics & Personal Care Formulations
Industries
Agriculture & Feed
Product Families
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Plastics & Packaging
Cleaning Ingredients
CASE Ingredients
Products
Agrochemicals
Applications
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE Ingredients
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Automotive & Transportation
Automotive
Other Automotive Applications
Products in Other Automotive Applications: Vacuum Bagging
16 Products found in Other Automotive Applications
Filters
Product Families
Suppliers
End Uses
Functions
Chemical Family
Products
Brands
Suppliers
Formulations
Documents
Relevance
ATL Composites
E-Fibreglass Double Bias
Reinforcement Material:
Glass Fibers
Reinforcement Form:
Non Crimp Fabrics
Processing Methods:
Vacuum Bagging, Resin Transfer Molding (RTM), Hand Lay-up
Features:
High Torsional Stability, Corrosion Resistant, High Strength, High Stiffness, Corrosion Resistance
E-Fiberglass Double Bias can be used in a variety of applications in the automotive, aerospace, construction, corrosive, industrial and marine industries. NCF is a composite reinforcing fabric in which fibers are organized into layers of plies of variable weight and orientation. The layers are stitched together. The result is a range of engineered fabrics with predictable, repeatable properties for the composite industry. The fiber orientation in the Double-Bias Non-Crimp Fabrics, ±450, is the optimum construction to provide high shear strength and stiffness. These materials are ideal for providing torsion stiffness in tubular constructions, or shear strength in the webs of beams or in stiffeners. As well as laterally loaded panels with aspect ratios from 1 to 3. Double-bias fabrics are also ideal products to use as tabbing material when bonding laminates together. This product is suitable for hand lay-up, vacuum bagging, vacuum injection, and other RTM- processes the fabric is very drapable and conforms well to complex geometry components.
APCM
APCM DA 4080
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing, Vacuum Bagging
End Uses:
Tanks
APCM DA 4080 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.
APCM
APCM DA 4092
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing, Vacuum Bagging
End Uses:
Tanks
APCM DA 4092 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.
APCM
APCM DA 4518U
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing, Vacuum Bagging
End Uses:
Tanks
APCM DA 4518U is a tough, versatile, modified epoxy resin system that cures at 250°F to 350°F. DA4518U can be supplied as a prepreg tape coated on unidirectional graphite.
APCM
APCM DA 4090
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing, Vacuum Bagging
End Uses:
Tanks
APCM DA 4090 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.
ATL Composites
E-Fibreglass Welf Triaxial
Reinforcement Material:
Glass Fibers
Reinforcement Form:
Multiaxial Fabric, Non Crimp Fabrics
Processing Methods:
Vacuum Bagging, Resin Transfer Molding (RTM), Hand Lay-up
Features:
Corrosion Resistant, High Strength, High Stiffness, Corrosion Resistance
E-Fiberglass Welf Triaxial can be used in a variety of applications in the automotive, aerospace, construction, corrosive, industrial and marine industries. NCF is a composite reinforcing fabric in which fibers are organized into layers of plies of variable weight and orientation. The layers are stitched together. The result is a range of engineered fabrics with predictable, repeatable properties for the composite industry. Triaxial Transverse (Weft Triaxial) Non-Crimp Fabrics are ideal for applications that require a combination of high transverse and shear strength and stiffness, and some longitudinal strength. The combination of straight, non-woven fibers and high glass volume fractions give superior properties at lower weight. This triaxial product is suitable for hand lay-up, vacuum bagging of relatively flat components (minimum curvature radius approximately 15mm), vacuum injection and other RTM-processes.
ATL Composites
E-Fibreglass Warp Triaxial
Reinforcement Material:
Glass Fibers
Reinforcement Form:
Non Crimp Fabrics, Multiaxial Fabric
Processing Methods:
Vacuum Bagging, Resin Transfer Molding (RTM), Hand Lay-up
Features:
Corrosion Resistant, High Strength, High Stiffness, Corrosion Resistance
E-Fiberglass Warp Triaxial can be used in a variety of applications in the automotive, aerospace, construction, corrosive, industrial and marine industries. NCF is a composite reinforcing fabric in which fibers are organized into layers of plies of variable weight and orientation. The layers are stitched together. The result is a range of engineered fabrics with predictable, repeatable properties for the composite industry. Triaxial Longitudinal (Warp Triaxial) Non-Crimp Fabrics are ideal for applications that require a combination of high longitudinal and shear strength and stiffness, and some transverse strength. Ideal for laterally loaded panels with aspect ratio from 1 .5 to ∞. This triaxial product is suitable for hand lay-up, vacuum bagging of relatively flat components (minimum curvature radius approximately 15mm), vacuum injection and other RTM-processes.
APCM
APCM DA 4082
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing, Vacuum Bagging
End Uses:
Tanks
APCM DA 4082 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.
PRF Composite Materials
PRF Composite Materials RP549
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Reinforcement Material:
Carbon Fibers
Processing Methods:
Vacuum Bagging, Compression Molding, Prepreg Processing, Rolling
PRF Composite Materials RP549 is a highly toughened modified epoxy prepreg that has been specially formulated for the production of components requiring high mechanical properties and good impact resistance, particularly those exposed to elevated temperatures. This new system has an >200°C Tg following the 180°C cure cycle, and provides excellent mechanical properties in tensile, ILS and flexural strength. RP549 is now in manufacture on a range of our high quality woven fabrics.
ATL Composites
E-Fibreglass Welf Quadriaixial
Reinforcement Material:
Glass Fibers
Reinforcement Form:
Multiaxial Fabric, Non Crimp Fabrics
Processing Methods:
Vacuum Bagging, Hand Lay-up
Features:
Corrosion Resistant, High Strength, High Stiffness, Corrosion Resistance
E-Fiberglass Welf Quadriaixial can be used in a variety of applications in the automotive, aerospace, construction, corrosive, industrial and marine industries. NCF is a composite reinforcing fabric in which fibers are organized into layers of plies of variable weight and orientation. The layers are stitched together. The result is a range of engineered fabrics with predictable, repeatable properties for the composite industry. Quadraxial Non-Crimp Fabrics provide excellent longitudinal, transverse, and shear strength. Providing a good thickness build-up per layer, Quadraxials are ideal for added strength with less layers. The quadraxial product is suitable for hand lay-up, vacuum bagging and resin infusion providing excellent wet-out on medium to large projects.
ATL Composites
E-Fibreglass Biaxial
Reinforcement Material:
Glass Fibers
Reinforcement Form:
Non Crimp Fabrics, 0/90 Fabric
Processing Methods:
Vacuum Bagging, Resin Transfer Molding (RTM), Hand Lay-up
Features:
Corrosion Resistance, Fatigue Resistance, Good Mechanical Properties, Corrosion Resistant, Fatigue Resistant, Improved Mechanical Properties
E-Fiberglass Biaxial can be used in a variety of applications in the automotive, aerospace, construction, corrosive, industrial and marine industries. NCF is a composite reinforcing fabric in which fibers are organized into layers of plies of variable weight and orientation. The layers are stitched together. The result is a range of engineered fabrics with predictable, repeatable properties for the composite industry. Longitudinal and Transverse (Biaxial) Non-Crimp Fabrics are Often used in the marine industry. They have similar fiber orientations to woven roving and combination woven roving / mat products, but do not have the fiber crimp associated with those woven products. This provides superior mechanical properties, particularly under fatigue loads. Biaxial (00/900) fabrics are available in much heavier weights than woven products. This speeds the cutting and laminating process, which saves significant fabrication costs. These materials are ideal in any application that requires optimum strength in two perpendicular directions. This product is suitable for hand lay-up, vacuum bagging of relatively flat components, vacuum injection, and other RTM-processes.
APCM
APCM DA 4518 E-Glass
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing, Vacuum Bagging
End Uses:
Tanks
APCM DA 4518 E-Glass is a modified epoxy system coated on heavy weight unidirectional E-Glass fibers. This product is designed to build excellent unidirectional strength using a minimum number of plies. DA 4518/E-Glass Uni also features extended room temperature out time and service temperatures to 300°F.
PRF Composite Materials
PRF Composite Materials RS-L285
Polymer Name:
Epoxy Resins & Compounds
Chemical Family:
Epoxy & Epoxy Derivatives
Processing Methods:
Injection Molding, Pultrusion, Filament Winding, Vacuum Bagging, Hand Lay-up, Compression Molding, Vacuum Infusion Processing (VIP)
PRF Composite Materials RS-L285 has very low mixed viscosity, ensuring a fast and complete impregnation of reinforcement fibers without drainage on vertical surfaces. The addition of fillers such as colloidal silica, microballoons, metal powder etc., is also acceptable to obtain special properties. The RS-L285 epoxy resin system exhibits good mechanical properties after curing at room temperature. If high temperature strength (≥ +60°C) or aircraft approval is not required, finished products made with the selection of hardener RS-H285 may be used without further heat treatment. Post curing (heat treatment) will further enhance the mechanical properties and will also increase the high temperature strength, up to 100°C being achievable depending on the selected hardener and post cure cycle used. The properties indicated in this document may only be achieved by curing/post-curing above 50°C.
APCM
APCM DA 4518
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing, Vacuum Bagging
End Uses:
Tanks
APCM DA 4518 is an epoxy prepreg designed for a temperature range of -67°F (-55°C) to 350°F (177°C), with a cure of 250°F (121°C) for one hour and or a cure of 350º F (177ºC) for 1 hour. This material needs to be post cure or cured to 350ºF to get the 350º properties.
APCM
APCM DA 409U/G35-150
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing, Vacuum Bagging
End Uses:
Tanks
APCM DA 409U/G35-150 is a tough, versatile, modified epoxy resin prepreg that cures at 250°F, a standard modulus 150 g/m2 carbon prepreg tape which can also be supplied as a 200g/m2 or a 300 g/m2 prepreg.
APCM
APCM DA 4517
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing, Vacuum Bagging
End Uses:
Tanks
APCM DA 4517 is an epoxy prepreg designed for a temperature range of -67°F (-55°C) to 350°F (177°C), with a cure of 180°F (82°C) for three hour. Shorter cures times are available at higher temperatures. The system is designed to be post cured if the higher temperature service range is required.