Products in Seating

High Impact Nylon Resin (PA66)

PBT-GF20 FR, PBT, 20% glass fiber reinforced, flame retardant

Flexible Pour Foam F7032 is a high-performance, flexible polyurethane foam designed for processing through plural component low or high-pressure dispensing equipment. Once fully cured, Flexible Pour Foam F7032 is tough, flexible and dimensionally stable.

PBT, 20% glass fiber reinforced, flame retardant (V0 at 0.8 mm; halogen free), hydrolysis-resistant

Embapur 012/3500 is a pigment preparation for flexible and rigid PU foam.

PBT-GF30, PBT, 30% glass fiber reinforced

F-874 Muraculon is a unique vinyl-based coating that when spray-applied provides a durable, flexible protective coating on polyurethane foams. F-874 can also be used on molded polyurethane and closed cell foam containing vinyl. F-874 Muraculon will produce a skin/membrane on unskinned polyurethane foam to create a barrierto moisture and chemicals. This skin has excellentresistance to fluids and petroleums. F-874 is a tough coating that adds durability to foam and imparts abrasion as well as puncture resistance.

Nylene Duratel MF9 is an un-reinforced general purpose acetal co-polymer. Duratel MF9 has the high creep resistance, wear resistance, and outstanding chemical resistance inherent in acetal resins. MF9 is suitable for such applications as clips, fasteners, gears, bushings and bearings, and other uses where long term creep and wear resistance are required

Nylene Unreinforced nucleated heat-stabilized nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with nucleation for faster part set-up Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

(PBT + ABS) -GF30, PBT / ABS blend, 30% glass fiber reinforced, reduced tendency to warp

LOXIAMID PA6 LU HS1 03004 is an injection molding grade of lubricated Polyamide 6 resin.

MultiPet C-01 from refillable bottles, post consumer.

Sacoflam 31105 is a solid phase active.

Interep 22-42 CR Technic cellular rubbers have an excellent fire resistance, good resistance to several different groups of chemicals , notably hydrocarbons , oils and seawater . They also display good aging resistance and good compression sets.

KEBABLEND / TC FE 181003 PBT is a special compound based on PBT, which is thermally conductive and electrically insulating.

Easy flowing grade with high impact strength ISO 9988-1: POM-K, M-GNPR, 05-001

PBT + PC, PBT / PC blend, unreinforced, impact resistant, reduced tendency to warp

Nylene Medium-impact modified nylon for fast, easy molding Parts molded from 721 have good impact strength right out of the mold without post conditioning Suitable for applications such as clips, fasteners, and other parts where some initial flexibility and impact resistance is desired Cylinder temperatures should be in the 450°F-500°F range.

Miracll Chemicals E 190 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Nylene General purpose injection molding resin. Lubricated and nucleated for faster cycle times Suitable for applications such as clips & fasteners, bushings & rollers, and other general purpose uses

CP-Polymer Technik Wellamid® GFT15N050-N2 is a Polyamide 66 (Nylon 66) material filled with 15% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Wellamid® GFT15N050-N2 are: Flame Rated Impact Modified Typical application of Wellamid® GFT15N050-N2: Automotive

Kocetal EL306 is impact strength modified grade suitable for fasteners and switches.

Roflam B7 is a halogen-free flame retardant in the form of a colorless liquid with low dynamic viscosity. Due to its excellent compatibility with many liquid raw materials, it is successfully used in polyurethane plastics, epoxy resins, vinyl ester resins and unsaturated polyester resins. Among the products belonging to the group of triaryl phosphoric esters, it is distinguished by being non-lethal to human health.

ARPRO® 3427GR is a expanded polypropylene.

LOXIAMID PA6 LU HS1 03008 is an injection molding grade of lubricated Polyamide 6 resin.

Flexible Pour Foam F7530 is a water-blown, high resilient flexible polyurethane foam designed for processing through plural component low or high pressure dispensing equipment. Flexible Pour Foam F7530 has excellent green strength and when fully cured provides excellent memory and tear resistance.

Sacoflam 47103 is a gas-phase active radical inhibitors.

ARPRO® 3427BL is a expanded polypropylene.

ARPRO® 3430BL is a expanded polypropylene.

Gujarat Petrosynthese is modifying and supplying of PP Polymers with a high grade of raw material using the latest technology as per customer specification. These Synofin (Modified PPCP) LA4704 GF20 polymers are modified with Flame Retardant, UV, Glass Fiber, Talc, etc.

Repelflex® Soft-Touch is a family of UV curable, transparent, flexible, coatings that are designed for a variety of materials. RepelFlex Soft-touch (ST) is designed specifically for application to plastics, providing a soft and silky feel to plastic substrates. In addition to having excellent adhesion, RepelFlex ST is a UV curable and highly durable, anti-microbial coating. RepelFlex ST is friendly to the environment as it contains no solvent or Fluorine.

Flexible Pour Foam F7214 Brown is a high-performance, flexible polyurethane foam designed for processing through plural component low or high-pressure dispensing equipment. Once fully cured, Flexible Pour Foam F7214 Brown is tough and flexible.

CP-Polymer Technik Wellamid® 22LHI4 XE-N is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Wellamid® 22LHI4 XE-N are: Impact Modified Impact Resistant Typical application of Wellamid® 22LHI4 XE-N: Automotive

Interep CNA CR Standard cellular rubbers have an excellent fire resistance, good resistance to several different groups of chemicals , notably hydrocarbons , oils and seawater . They also display good aging resistance and good compression sets.

Sekisui Plastics ST-Eleveat RE is environmentally friendly products that used 90% or more of recycled materials.

Gujarat Petrosynthese is modifying and supplying of PP Polymers with a high grade of raw material using the latest technology as per customer specification. Synofin (Modified PPCP) LA4601/470 - 1 General (Colou red) polymers are modified with Flame Retardant, UV, Glass Fiber, Talc, etc.