Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Automotive & Transportation
Coatings & Finishes
Rail & Mass Transit Coatings
Products in Rail & Mass Transit Coatings
410 Products found in Rail & Mass Transit Coatings
Filters
Suppliers
Product Families
Functions
End Uses
Chemical Family
Compatible Polymers & Resins
Products
Brands
Suppliers
Formulations
Documents
Relevance
ICL Phosphate Specialty - HALOX®
HALOX® 570 LS
Functions:
Flash Rust Inhibitor, Corrosion Inhibitor
Chemical Family:
Amine Complex
End Uses:
Top Coat, 2K (2 component) Coating, Latex, Primer, 1K (1 component) Coating, Waterborne Coating
Compatible Polymers & Resins:
Epoxies (EP), Acrylics, Alkyds, Polyurethanes (PU)
Labeling Claims:
Environmentally Friendly, Heavy Metal-free, Phosphate-free
Features:
Longer Performance Life, Primerless, Corrosion Resistance
HALOX® 570 LS is a ready-to-use liquid version of our popular organic corrosion inhibitor, HALOX® 570, which requires no dilution. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS may be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. HALOX® 570 LS may be used in both water-based primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 LS has a minimal effect on gloss reduction.
ICL Phosphate Specialty - HALOX®
HALOX® SZP-395
Chemical Family:
Phosphosilicates, Zinc & Zinc Compounds, Strontium & Strontium Compounds
Functions:
Pigment, Corrosion Inhibitor
Labeling Claims:
Heavy Metal-free
Compatible Polymers & Resins:
Epoxies (EP), Polyurethanes (PU), Alkyds, Polyvinylidene Chloride (PVDC)
HALOX® SZP-395 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SZP-395 is the most efficient and versatile corrosion-inhibiting pigment. It is recommended for use in a wide variety of resin systems and is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 make it the pigment of choice in thin film applications (<1 mil or 25 microns).
ICL Phosphate Specialty - HALOX®
HALOX® SZP-391
Chemical Family:
Phosphosilicates, Strontium & Strontium Compounds, Zinc & Zinc Compounds
Functions:
Pigment, Corrosion Inhibitor
Compatible Polymers & Resins:
Alkyds, Polyvinylidene Chloride (PVDC), Epoxies (EP), Polyesters
HALOX® SZP-391 is a white, nonrefractive, corrosion-inhibiting pigment that is highly efficient and versatile. It is recommended for use in a wide variety of resin systems, such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. Its fine particle size and low oil absorption make HALOX® SZP-391 the preferred pigment for thin-film applications (<1 mil or 25 microns).
ICL Phosphate Specialty - HALOX®
HALOX® 570
Chemical Family:
Amine Complex
Functions:
Corrosion Inhibitor
End Uses:
Top Coat, 2K (2 component) Coating, 1K (1 component) Coating, Waterborne Coating, Solventborne Coating
Compatible Polymers & Resins:
Epoxies (EP), Acrylics, Alkyds, Polyurethanes (PU), Styrene Acrylics
Labeling Claims:
Heavy Metal-free
Features:
Longer Performance Life, Primerless, Corrosion Resistance
HALOX® 570 is an organic corrosion inhibitor designed for use in waterborne industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. HALOX® 570 is especially effective along weld seams and, in some cases, can also be used in solvent-based coatings and UV-cured systems. HALOX® 570 may be used in formulations based on waterborne acrylic latexes and co-polymers, styrene/acrylic latexes, acrylate epoxy esters, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2-pack polyurethane. HALOX® 570 may be used in both waterborne primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 has a minimal effect on gloss reduction.
ICL Phosphate Specialty - HALOX®
HALOX® 550 WF
Functions:
Corrosion Inhibitor
End Uses:
Solventborne Coating, Coil Coating, Clearcoat, Waterborne Coating
Compatible Polymers & Resins:
Epoxies (EP), Polyesters, Polyvinyl Butyral (PVB), Alkyds, Polyurethanes (PU)
Labeling Claims:
Heavy Metal-free
Features:
Corrosion Resistance, Improves Adhesion
Synonyms:
(3-Glycidoxypropyl)trimethoxysilane, (γ-Glycidoxypropyl)trimethoxysilane, [[3-(Trimethoxysilyl)propoxy]methyl]oxirane, [3-(2,3-Epoxypropoxy)propyl]trimethoxysilane, [3-(Glycidyloxy)propyl]trimethoxysilane, [γ-(Glycidyloxy)propyl]trimethoxysilane, 1-(Glycidyloxy)-3-(trimethoxysilyl)propane, 2-((3-(Trimethoxysilyl)propyloxy)methyl)oxirane, 2-[[3-(Trimethoxysilyl)propoxy]methyl]oxirane, 3-(Glycidyloxy)propyltrimethoxylsilane, 3-(Trimethoxysilyl)propyl glycidyl ether, Epoxypropoxypropyltrimethoxysilane, Glycidoxypropyltrimethoxysilane, Glycidyl 3-(trimethoxysilyl)propyl ether, Glycidyl γ-(trimethoxysilyl)propyl ether, Glycidyloxypropyltrimethoxysilane, NSC 93590, Trimethoxy-γ-glycidoxypropylsilane, Trimethoxy(3-(oxiran-2-ylmethoxy)propyl)silane, Trimethoxy(3-glycidoxypropyl)silane, Trimethoxy(3-glycidyloxypropyl)silane, γ-(2,3-Epoxypropoxy)propyltrimethoxysilane, γ-Glycidyl ether propyltrimethoxysilane, γ-Triglycidoxypropyltrimethoxysilane
HALOX® 550 WF is a water-free (WF) corrosion inhibitor and adhesion promoter that uses a sol-gel-based formula. It is designed to protect a variety of coatings, including waterborne and solventborne clear coats, glossy direct-to-metal coatings, thin-film coatings, acrylic emulsions, polyurethanes, epoxies, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. This product is suitable for use in low-pH and acid-catalyzed systems.
ICL Phosphate Specialty - HALOX®
HALOX® 520
Functions:
Coupling Agent, Corrosion Inhibitor, Adhesion Promoter
Chemical Family:
Amine Salts
End Uses:
2K (2 component) Coating, Coil Coating, 1K (1 component) Coating, Waterborne Coating
Compatible Polymers & Resins:
Epoxies (EP), Acrylics, Polyurethanes (PU)
Labeling Claims:
Heavy Metal-free
Features:
Corrosion Resistance, Improves Adhesion
HALOX® 520 is a liquid organic corrosion inhibitor primarily designed for use in water-borne coating systems. It contains dual functionality as a corrosion inhibitor and an adhesion promoter. HALOX® 520 may be used in waterborne formulations such as 2 pack epoxy systems, 1 and 2 pack polyurethanes, acrylics (especially epoxy/amine-functionalized), and hybrid systems. It may also be used as a metal pretreatment additive.
ICL Phosphate Specialty - HALOX®
HALOX® SZP-391 JM
Chemical Family:
Phosphosilicates, Strontium & Strontium Compounds, Zinc & Zinc Compounds
Functions:
Pigment, Corrosion Inhibitor
Compatible Polymers & Resins:
Alkyds, Polyvinylidene Chloride (PVDC), Epoxies (EP), Polyesters
HALOX® SZP-391 JM is an efficient and versatile corrosion-inhibiting pigment. It is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SZP-391 JM is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride-based latexes and is recommended for use in a wide variety of resin systems.
ICL Phosphate Specialty - HALOX®
HALOX® Z-PLEX® 111
Functions:
Corrosion Inhibitor, Pigment
Chemical Family:
Phosphates, Zinc & Zinc Compounds
End Uses:
Waterborne Coating, Solventborne Coating, Solventless & High Solids Coating, 2K (2 component) Coating, Latex, Primer
Compatible Polymers & Resins:
Polyvinylidene Chloride (PVDC), Acrylics, Epoxy Esters, Alkyds (Short Oil), Polyesters, Epoxies (EP), Alkyds (Medium Oil), Alkyds (Long Oil), Alkyds
Features:
Corrosion Resistance, High Performance, Cost Effective
HALOX® Z-PLEX 111 is a corrosion-inhibiting pigment used in protective coating systems that is highly versatile and more cost-effective than commercial zinc phosphate. HALOX® Z-PLEX 111 can provide a higher level of corrosion protection than commercial zinc phosphate when used as an equal-weight replacement.
ICL Phosphate Specialty - HALOX®
HALOX® 630
Functions:
Corrosion Inhibitor
Chemical Family:
Ammonium Salts
End Uses:
Primer, Clearcoat, 2K (2 component) Coating, Solventborne Coating
Compatible Polymers & Resins:
Alkyds, Polyurethanes (PU), Epoxies (EP), Polyesters, Acrylics
Features:
Improves Adhesion
HALOX® 630 is a liquid organic corrosion inhibitor for solvent-borne protective coatings on metal surfaces. It may be used in solventborne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high-solids epoxy esters, alkyds, acrylic resins, and 2 pack polyurethane primers. However, in bake systems, the temperature should not exceed 150°C. It should be noted that yellowing may be observed with reactive isocyanates. HALOX® 630 provides superior corrosion resistance even over poorly prepared surfaces, such as adherent rust or oil contamination.
ICL Phosphate Specialty - HALOX®
HALOX® 550
Functions:
Corrosion Inhibitor
Chemical Family:
Silanes
End Uses:
Clearcoat, Coil Coating, Primer, Lacquers, Waterborne Coating, Solventborne Coating
Compatible Polymers & Resins:
Epoxies (EP), Polyesters, Acrylics, Alkyds, Polyurethanes (PU)
Labeling Claims:
Heavy Metal-free
Features:
Improves Adhesion, Excellent Dispersibility, Corrosion Resistance, High Gloss, Good Gloss Retention, Fast Drying
Synonyms:
(3-Glycidoxypropyl)trimethoxysilane, (γ-Glycidoxypropyl)trimethoxysilane, [[3-(Trimethoxysilyl)propoxy]methyl]oxirane, [3-(2,3-Epoxypropoxy)propyl]trimethoxysilane, [3-(Glycidyloxy)propyl]trimethoxysilane, [γ-(Glycidyloxy)propyl]trimethoxysilane, 1-(Glycidyloxy)-3-(trimethoxysilyl)propane, 2-((3-(Trimethoxysilyl)propyloxy)methyl)oxirane, 2-[[3-(Trimethoxysilyl)propoxy]methyl]oxirane, 3-(Glycidyloxy)propyltrimethoxylsilane, 3-(Trimethoxysilyl)propyl glycidyl ether, Epoxypropoxypropyltrimethoxysilane, Glycidoxypropyltrimethoxysilane, Glycidyl 3-(trimethoxysilyl)propyl ether, Glycidyl γ-(trimethoxysilyl)propyl ether, Glycidyloxypropyltrimethoxysilane, NSC 93590, Trimethoxy-γ-glycidoxypropylsilane, Trimethoxy(3-(oxiran-2-ylmethoxy)propyl)silane, Trimethoxy(3-glycidoxypropyl)silane, Trimethoxy(3-glycidyloxypropyl)silane, γ-(2,3-Epoxypropoxy)propyltrimethoxysilane, γ-Glycidyl ether propyltrimethoxysilane, γ-Triglycidoxypropyltrimethoxysilane
HALOX® 550 is a liquid organic-inorganic sol-gel corrosion inhibitor designed for corrosion protection in thin film coatings such as water and solvent-based finishes, high gloss DTM, conventional primers, acrylic clear coats, fast-drying lacquers, wash primers, anti-fingerprint coatings, and conversion coatings. It also increases hydrophobicity and is pH stable, making it compatible with both waterborne and solventborne coatings.
Dar-Tech Inc.
SYNTHALAT A 077
Chemical Family:
Acrylics & Acrylates
Compatible Substrates & Surfaces:
Metal
SYNTHALAT A 077 is a polyisocyanate-curing acrylic resin. Used in 2-pack coatings, in combination with aliphatic polyisocyanates, for industrial coatings that offer good mechanical properties along with resistance to chemical attack. It has applications in marine transportation, rail and mass transit coatings, coatings and markings, and also in infrastructure road paving.
Scott Bader
Crystic® Gelcoat LS 97PA Isopthalic Spray
Chemical Family:
Polyesters, Isophthalics
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Processing Methods:
Spray Lay-up
Color:
White
Features:
Weather Resistance, Good Weather Stability, Good Surface Finish, Excellent Surface Finish, Low Styrene Content, Water Resistant, Water Resistance, High Impact Resistance
Crystic® Gelcoat LS 97PA Isopthalic Spray is our best weathering isophthalic spray gelcoat. It exhibits low color change and superior gloss retention when compared to all other isophthalic competitive gel coats tested. This product can be used across all markets, and it has excellent water resistance and Lloyd's approval for the marine market.
Scott Bader
Crystic® Isophthalic Brush Gelcoat LS 88PA
Chemical Family:
Isophthalics, Polyesters
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Processing Methods:
Spray Lay-up
Features:
Weather Resistance, Good Weather Stability, Good Surface Finish, Excellent Surface Finish, Water Resistance, Low Styrene Content, Water Resistant
Crystic® Isophthalic Brush Gelcoat LS 88PA is an isophthalic gelcoat. It is pre-accelerated and formulated for brush application and is recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.
Scott Bader
Crystic® Brush Mouldguard (B)
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Features:
Thixotropic, Improved Flexibility
Crystic® Brush Mouldguard (B) is a flexible pre-accelerated thixotropic coating material for mold protection. It has been formulated for brush application and is available in a restricted range of colors. It has been specifically developed for the protection from composite molds when put into storage or for transportation. The cured coating has been designed to give easy stripping from stored moulds prior to re-use.
Scott Bader
Crystic® Fireguard Gelcoat 72PAX
Applications:
Rail & Mass Transit, Architectural Coatings, Industrial Coatings
Product Families:
Gelcoats & Topcoats, Surface Finishes
Crystic® Fireguard Gelcoat 72PAX is a new technology, spray fire retardant topcoat which is halogen free. It has low surface spread of flame compared to competitive standard technology fire retardant topcoats. This pre-accelerated filled spray topcoat can be used both internally and externally for building, transport and general industrial work.
Scott Bader
Crystic® Sandable Brush Gelcoat 42PA
Applications:
Commercial, Rail & Mass Transit, Vehicle Refinish
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Orthophthalics, Polyesters
Crystic® Sandable Brush Gelcoat 42PA is an orthophthalic sandable gelcoat, filled, pre accelerated and formulated for brush application. It has been specially designed for applications that are to be post-painted. This gelcoat is available in a limited range of colors.
Scott Bader
Crystic® Fireguard Gelcoat 73PA
Applications:
Rail & Mass Transit, Architectural Coatings, Industrial Coatings
Product Families:
Gelcoats & Topcoats, Surface Finishes
Crystic® Fireguard Gelcoat 73PA is a new technology fire retardant brush gelcoat that is halogen free. It has a number of fire approvals with different crystic resin systems. This product has low surface spread of flame compared to competitive standard technology fire retardant gelcoats.
Scott Bader
Crystic® Isophthalic Brush Topcoat 65PAX
Applications:
Marine, Rail & Mass Transit, Architectural Coatings
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Isophthalics, Polyesters
Crystic® Isophthalic Brush Topcoat 65PAX is a general purpose, brush isophthalic topcoat which cures tack free when applied to the reverse side of a laminate. It can be used in applications where the back surface of a polyester laminate needs to be given a gelcoat finish to improve aesthetics.
Scott Bader
Crystic® Low Styrene Spray Gelcoat LS 96PA
Chemical Family:
Isophthalics, Polyesters
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Processing Methods:
Spray Lay-up
Features:
Weather Resistance, Good Weather Stability, Good Surface Finish, Excellent Surface Finish, Water Resistance, Low Styrene Content, Low Film Porosity, Water Resistant
Crystic® Low Styrene Spray Gelcoat LS 96PA is an isophthalic gelcoat. It is filled, pre-accelerated and formulated for spray application. The viscosity profile ensures even coverage with minimal drainage and low film porosity. It is recommended for use in building and transport industries and is also suitable for general molding requirements.
Scott Bader
Crystic® Fireguard Gelcoat 72PA
Applications:
Rail & Mass Transit, Architectural Coatings, Industrial Coatings
Product Families:
Gelcoats & Topcoats, Surface Finishes
Crystic® Fireguard Gelcoat 72PA is a new technology spray fire retardant gelcoat which is halogen free. It has a number of fire approvals with different Crystic resin systems. This product has low surface spread of flame compared to competitive standard technology fire retardant gelcoats.
Scott Bader
Crystic® Isophthalic Spray Gelcoat GT-900
Chemical Family:
Polyesters, Isophthalics
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Processing Methods:
Spray Lay-up
Features:
Weather Resistance, Good Weather Stability, Good Surface Finish, Excellent Surface Finish, Low Styrene Content, Water Resistant, Pigmentable, Water Resistance, Low Film Porosity, High Impact Resistance
Crystic® Isophthalic Spray Gelcoat GT-900 is a high performance isophthalic gelcoat, filled, pre-accelerated and formulated for spray application. It has been developed to have excellent intrinsic water and weather resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity. This product is recommended for use in the marine, building and transport industries. It is also suitable for general molding requirements.
Scott Bader
Crystic® Low Viscosity Gelcoat 64PA
Chemical Family:
Polyesters, Isophthalics
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Processing Methods:
Hand Lay-up
Features:
Low Viscosity, Good Surface Finish, Excellent Surface Finish, Water Resistance, Water Resistant, High Impact Resistance
Crystic® Low Viscosity Gelcoat 64PA is a high performance isophthalic gelcoat, pre-accelerated and formulated for brush or roller application. It is recommended for use in all markets including marine, land transport and building applications and is also suitable for general molding requirements. Crystic® Gelcoat 64PA is approved by Lloyd'™s Register of Shipping.
Scott Bader
Crystic® Isophthalic Spray Gelcoat GT-1000
Applications:
Marine, Rail & Mass Transit, Architectural Coatings
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Isophthalics, Polyesters
Crystic® Isophthalic Spray Gelcoat GT-1000 is a gelcoat range providing a fast, precise service producing high quality gelcoats for you. Recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.
Scott Bader
Crystic® Fireguard Gelcoat 70PA
Applications:
Rail & Mass Transit, Architectural Coatings, Industrial Coatings
Product Families:
Gelcoats & Topcoats, Surface Finishes
Crystic® Fireguard Gelcoat 70PA is our market leading halogen-free fire retardant gelcoat. It has been specifically designed for very stringent fire approvals particularly requiring low smoke characteristics. It achieves TS45545 HL2 with Crestapol 1212 and has low surface spread of flame. It can also be used with standard polyester fire retardant resins.
Scott Bader
Crystic® Sandable Spray Gelcoat 44PA
Applications:
Commercial, Rail & Mass Transit, Vehicle Refinish
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Isophthalics, Polyesters
Crystic® Sandable Spray Gelcoat 44PA is an isophthalic sandable spray gelcoat for post painting application. This pre-accelerated, isophthalic, filled gelcoat has been specifically designed for applications that are to be post-painted mainly for transport industry. Crystic Gelcoat 44PA has been formulated for spray application.
Scott Bader
Crystic® Isophthalic Brush Gelcoat 65PA
Chemical Family:
Isophthalics, Polyesters
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Processing Methods:
Spray Lay-up
Features:
High Performance, Good Surface Finish, Excellent Surface Finish, Improved Flexibility, Water Resistance, Blister Resistance, Water Resistant, High Impact Resistance
Crystic® Isophthalic Brush Gelcoat 65PA is a general purpose Isophthalic brush gelcoat used successfully globally across all market sectors for years. Molders choose this gelcoat over competitive products because of its exceptional handling properties in production, good flexibility, good gloss and ease of repair.
Scott Bader
Crystic® Spray Gelcoat LS 30PA
Applications:
Commercial, Rail & Mass Transit, Architectural Coatings
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Polyesters
Crystic® Spray Gelcoat LS 30PA is a superior weathering Iso-NPG gelcoat. It is pre-accelerated and formulated for spray application. Crystic® Gelcoat LS 30PA has been developed to have excellent intrinsic water and weather resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity.
Scott Bader
Crystic® Isophthalic Brush Gelcoat GT-600
Chemical Family:
Polyesters, Isophthalics
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Features:
Low Film Porosity, Water Resistant, High Impact Resistance, Weather Resistance, Good Weather Stability, Good Surface Finish, Excellent Surface Finish, Pigmentable, Water Resistance
Crystic® Isophthalic Brush Gelcoat GT-600 is our gelcoat range providing a fast, precise service producing high quality gelcoats for you. Recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.
Scott Bader
Crystic® Brush Gelcoat LS 31PA
Chemical Family:
Polyesters
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Features:
Weather Resistance, Good Weather Stability, Good Surface Finish, Excellent Surface Finish, Water Resistance, Low Film Porosity, Water Resistant
Crystic® Brush Gelcoat LS 31PA is a superior weathering iso/NPG brush gelcoat offering better color stability than all other competitive iso/NPG gelcoats tested in Florida for 12 months. It has been formulated for ease of use in production, easy to repair and can be used in all market sectors including marine. It has excellent water resistance and has Lloyds approval.
Hightac
TACorr MSM
Functions:
Coupling Agent, Adhesion Promoter, Corrosion Inhibitor
Chemical Family:
Fatty Acids, Amides, Polyoxyalkenyl
End Uses:
Varnishes, Lacquers, Waterborne Coating
Features:
Corrosion Resistance, Improved Substrate Wetting, Improves Adhesion
TACorr MSM is a long-term steel and multi metal corrosion inhibitor of the primary for use in water-based paints & lacquers was developed. . Modifications of our TACorr G50 polymer, TACorr MSM improves the results at the undercreeping at the scretch after the salt spray test.
Suncolor Corporation
SUNSPHERES™ 200 Nm ST-3
Functions:
Reinforcement, Filler
Chemical Family:
Silica, Carbonates
End Uses:
Radiation Curable Coating, Primer, Waterborne Coating, Marine Applications, Top Coat, Lighting Applications, Solventless & High Solids Coating, Aerospace Applications
The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.
Shamrock Technologies Inc.
Shamrock Technologies Inc. S-395-N5
Functions:
Anti-Abrasion Agent
Chemical Family:
Synthetic Waxes, Diols, Glycols
End Uses:
Waterborne Coating, Powder Coating, Radiation Curable Coating, Solventborne Coating
S-395-N5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.
Shamrock Technologies Inc.
HYDROCER 7112
Applications:
Aerospace & Aviation, Commercial, Rail & Mass Transit
Product Families:
Surface Modifiers, Additives
End Uses:
Waterborne Ink, Waterborne Coating
Hydrocer 7112 is a stable, aqueous synthetic wax dispersion. Keep the lid tight on the container to avoid separation. If this product has separated, simple mixing with paddle or propeller mixer is all that will be required. The Hydrocer products are wax emulsions, dispersions, or a combination of these.
Shamrock Technologies Inc.
CERASPERSE 87NS
Chemical Family:
Polyurethanes (PU)
Functions:
Anti-Abrasion Agent
End Uses:
Radiation Curable Coating, Lithographic Ink, Top Coat, Varnishes
Compatible Polymers & Resins:
Polyurethanes (PU)
CeraSPERSE 87NS is a polymeric compound for non-skid applications. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.
Georgia-Pacific Chemicals
GP CL-7003
Functions:
Binder & Resin, Chain Extender
Chemical Family:
Phenol & Cresol Epoxy Resins (Novolac), Epoxy & Epoxy Derivatives
Compatible Substrates & Surfaces:
Metal
Compatible Polymers & Resins:
Polyesters, Epoxies (EP)
GP® CL-7003 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.
Shamrock Technologies Inc.
Shamrock Technologies Inc. S-375
Applications:
Aerospace & Aviation, Commercial, Rail & Mass Transit
Product Families:
Surface Modifiers, Additives
Chemical Family:
Synthetic Waxes, Mixed Metallic Oxide
End Uses:
Radiation Curable Coating, Waterborne Coating, Solventborne Coating
S-375 is a synthetic wax with a DSC peak melt around 100°C and the corresponding low onset of melting. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.
Show
36
of 410 results
Go to page
1
2
3
4
5
6
7
8
9
10