Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- CAS No.
- 125078-60-6
- EC No.
- 406-052-4
- Technologies
- Product Families
- Chemical Description
Alkylammonium Salt Solution, 70% active substance in xylene
Features & Benefits
- CASE Ingredients Features
- Features
HALOX® Organic Corrosion Inhibitors are effective against flash rusting and in-can corrosion prevention, though the benefits of using these products does not end there. Our HALOX® Organic Corrosion Inhibitors are ideally suited for high gloss, thin film, and clear coat applications. They also provide superior synergy when used in combination with inorganic corrosion inhibitors in traditional coatings. To achieve desired performance of your resin system proper selection of HALOX® Inhibitors in essential.
- Advantages
- HALOX® 630 is a liquid, post-addable corrosion inhibitor designed to promote wet adhesion for solvent based coatings.
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Use Level
- 1 - 3 %
- Recommended Loading Levels
- Recommended concentrations range from 1-3% HALOX® 630 (as supplied) based on total formula weight.
- The amount of HALOX® 630 required for optimum performance should be determined in trials over the recommended concentration range.
- Incorporation
- HALOX® 630 may be incorporated by post-addition to finished systems. Where applicable, add to the polyol of a 2 pack polyurethane, or to the amine/amide part of a 2 pack epoxy.
- Avoid hardeners containing traditional cylcoaliphatic amines such as isophoronediamine (IPD). Modified polyamidoamine hardeners such as: Aradur® 283 US (Huntsman) and polyamide-type curing agents such as: EPIKURE® 3155 (HEXION) or equivalent are compatible. Occasional viscosity increases can be avoided by pre-cutting with benzyl alcohol.
- If you are removing a heavy metal based anti-corrosive pigment, compensate for its removal with an extender pigment so that the ratio PVC:CPVC remains constant. However, HALOX® 630 can be used in conjunction with anti-corrosive pigments, preferably based on compounds defined as non-toxic or reportable under applicable regulations. Check compatibility, shelf life (e.g. accelerated at high temperature), cure and pot-life, if applicable. Other formulation variables may also be optimized, for example, dispersants, surfactants, and PVC:CPVC ratio.
- Applications
- 2K Epoxies
- Alkyds
- Acrylic Resins
- 2K Polyurethane Primers
- Solvent Based Systems
- Polyester, and alkyds: Auto refinish, OEM, DTM, industrial and marine coatings.
Properties
- Physical Form
- Appearance
- Slightly yellow liquid
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Dynamic Viscosity (at 20°C) | 160 | mPa.s | — |
| Solubility in Butylacetate (at 20°C) (active substance/solution) | min. 50 | g/100g | — |
| Solubility in Isopropanol (at 20°C) (active substance/solution) | min. 50 | g/100g | — |
| Solubility in Methyl-isobutylketone (at 20°C) (active substance/solution) | min. 50 | g/100g | — |
| Solubility in n-Butanol (at 20°C) (active substance/solution) | min. 50 | g/100g | — |
| Solubility in Propyleneglycol Monomethylether (at 20°C) (active substance/solution) | min. 50 | g/100g | — |
| Solubility in Water (at 20°C, pH 7) (active substance/solution) | max. 0.01 | g/100g | — |
| Solubility in White Spirit (at 20°C, pH 7) (active substance/solution) | min. 50 | g/100g | — |
| Solubility in Xylene (at 20°C) (active substance/solution) | min. 50 | g/100g | — |
| Specific Gravity (at 20°C) | 0.99 | g/cm³ | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Storage & Handling
- Shelf Life
- 36 Months