Products in Automotive & Transportation: Tires

Styrene butadiene synthetic rubber SBR-1500 is essentially a styrene (23.5%) and butadiene (76.5%) copolymer obtained by emulsification method with the use of resin/fatty soaps.

Shandong Fine Chemical Technology NOBS is an excellent prolongation accelerator. It can be used alone or in combination with a small amount of additives. It is widely used in NR, SBR, NR-BR/SBR rubber compounds, in NBR and other synthetic rubber compounds, and used in the production of automobile tires, tire retreading materials, conveyor belts, and power. Transmission belts, rubber products with thick cross-sections, rubber products with heavy kinetic energy stress, rubber products with complex shapes, rubber shoes, injection products, cables, and various other molded and extruded rubber products.

Mediaplast PX-2 is a semi-synthetic plasticizer based on long-chain hydrocarbons with paraffinic character. It is recommended to use in elastomers with low polarity, e. g. NR, IIR, BR, SBR and EPDM.

MBT(M) Granule is Thiazole. It is non-poisonous, grayish-white or light yellow powder with slightly foul odor and bitter taste. MBT(M)Powder is easily soluble in ethyl acetate, acetone, dilute solution of sodium hydroxide and sodium carbonate, soluble in ethyl alcohol, not easily soluble in benzene, insoluble in water and gasoline. It is stable in storage.

Pertac/GR is a multifunctional process aid based on 1.2-polybutadiene converted into free-flowing granules.

Silanogran Silanogran SI-69/GR 70 offers improvement of mixing properties e. g. reduction in Mooney viscosity, better processability when mixing, calendering and extruding and influences the physical-mechanical data of the vulcanizates favorably.

Continental Carbon N120 is an excellent performance in wide range of tread compounds from passenger to truck tires.

Promix® 100LS is a highly effective process enhancer and for Natural and Synthetic rubber compounds.

PZ Powder is a Rubber accelerator.

JSR EP93 is good aging set properties.

N219 is a rubber carbon black.

JSR HPR355 is a basic grade for CB/silica compound.

Taizhou Huangyan Donghai Chemical Tackifying resin 203 (1068) is a thermoplastic p-tertylphenol-formaldehyde adhesive resin.

Orient Black® N375 offers high wear resistance and reinforcing properties.

N774 is a rubber carbon black.

Microsphere® F-65 is chlorinated free grade and is medium temperature expansive product.

China Star Materials Antioxidant ODA is mainly used to produce tires, tube tires, cables, rubber overshoes, rubber mats, thermal aureoles and sponge products, etc. When ODA is used in CR with Antioxidant ODA as co-reagent, it will perform its best thermal resistance, reduce the plasticity of unvulcanized CR, and decrease the degree of shrinkage during calendering, so is helpful to adjust the size of semi finished articles, and increase the stability of CR during transportation and storage.

Milagro Rubber 1502 offers a complete range of styrene butadiene rubber (SBR) for the industry today. Their narrow molecular weight distribution makes them ideal for applications including tires, automotive, mechanical rubber goods, footwear, and/or general purpose applications in need of wear resistance and processing versatility.

Shandong Stair Chemical & Technology Rubber antioxidant RD (TMQ) is used in tire and other rubber products.

Rayton Chemicals TBZTD is a Pale yellow powder.

Shandong Fine Chemical Technology MBT is a general-purpose accelerator that is widely used in various rubbers. It is a medium and super fast vulcanization accelerator for natural rubber and general synthetic rubber. It has a plasticizing effect on natural rubber. It can be used alone or in combination with other additives. Mainly used in the manufacture of tires, hoses, rubber shoes, tapes, cables, etc. The bitter taste is not suitable for the manufacture of rubber products in contact with food.

Robinson Brothers SDBC 20420 acts as fast primary and secondary accelerator in latex.

Banac TMTD has chemical composition of Tetramethyl thiuram disulfide and used as an accelerator.

CBS (CZ) Powder is Secondary Sulfonamide. It is grayish white or yellowish powder with slightly odor and nonpoisonous. It is soluble in benzene, methylbenzene, chloroform, carbon disulfide, carbon tetrachloride, methylene chloride, acetone and ethyl acetate; not easily soluble in ethyl alcohol; insoluble in water,dilute acid, dilute alkali and gasoline.

China Star Materials Octylated diphenylamine (Antioxidant OD) is antioxidant for NR, SBR, NBR and CR. It has good protective character to heat, oxygen, flexing and crazing, and is efficient to rubber whether used together with carbon black. It has obvious thermal brittleness resistance in CR, and can increase its protective character to ozone aging.

J. Allcock & Sons Yellow 130 is a yellow iron oxide pigment which is used in the paint and rubber industries to give a distinct yellow color.

DZ(DCBS) Powder is a Rubber accelerator.

Seast 3H is a variety of carbon black that is added to rubber to make it stronger and more res istant to wear. It is used in the rubber parts of industrial machines and various sizes and models of tire.

Seast 300 is a variety of carbon black that is added to rubber to make it stronger and more res istant to wear. It is used in the rubber parts of industrial machines and various sizes and models of tire.

JSR 1778N is a typical non-staining type oil-extended SBR.

DCBS (DZ) Powder is Secondary Sulfonamide. It is Light yellow to light pink powder, insoluble in water,soluble in gasoline, easily soluble in ethanol, aether, acetone, benzene,toluene, methylene chloride, carbon tetrachloride, ethyl acetate and other organic solvent.

SYNTHETIC RUBBER MCSM® is a modified chlorosulfonated polyethylene rubber, its airtightness is equivalent to halogenated butyl rubber, oil resistance is better than nitrile rubber, and has excellent aging resistance and high temperature resistance, and various types of rubber Olefin rubber has excellent compatibility. Mainly used for tire sealing layer and rubber products such as oil resistance, high temperature resistance and weather resistance. When used in tire sealing layer, it can be substituted for bromobutyl rubber. Due to its slow curing speed, it is generally recommended to replace 5-10 parts. The combined use of modified chlorosulfonated polyethylene rubber can significantly improve the processing performance of the rubber material and increase the air tightness of the rubber material.

Goodyear Rubber Company of So. California SBR Polymer (Styrene Butadiene Rubber) describes families of synthetic rubbers derived from Styrene and butadiene. SBR has good abrasion resistance. In 2012 more than 5.4 million tons of SBR were processed worldwide.

N375 is a rubber carbon black.

Emulprene 1502 is a cold styrene – butadiene copolymer, used fatty and rosin acid as emulsifier, coagulated by salt-acid system and stabilized with a non-staining antioxidant.