Automotive & Transportation

Perstorp AB

Pevalen™

Pevalen™ (CAS: 15834-04-5) is a non-phthalate plasticizer for flexible PVC. It is designed for close-to-consumer applications for a variety of industries, including automotive, building and construction, consumer goods and printing and packaging. Benefits Phthalate-free Manufacturing process reduces use of finite raw materials Features High plasticizing efficiency (equal or better vs. traditional general purpose plasticizers) Excellent processing properties Exceptional UV resistance Low volatility and smoke Applications Coated fabrics Artificial leather Flooring Wall covering Automotive interiors PVC plastisols Food contact applications Sports and leisure products Automotive interiors Pool liners

Toray

Amilan® CM3001G-30

Toray Amilan® CM3001G-30 is a Polyamide 66 (Nylon 66) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application includes automotive. Primary characteristic includes flame rated.

DuPont

MULTIBASE™ HMB-1103

DuPont HMB-1103 Masterbatch is a new-generation tribological modifier and processing aid designed for polar engineered based systems such as PA. DuPont HMB-1103 Masterbatch delivers slip and wear performance similar to that of standard, highly loaded PTFE compounds. DuPont HMB-1103 Masterbatch is also highly efficient at suppressing stick-slip phenomenon. DuPont HMB-1103 Masterbatch acts as a processing aid and improves flowability.

Kotec

Kotex K-30UVR Polycarbonate

Kotex K-30UVR is a UV stability, Mould release, Medium viscosity

Kettlitz-Chemie

Kettlitz Chemie Antitack NP-97

Antitack NP-97 is a Pure zinc stearate dispersion of small particles, developed especially for dip tank equipment. The stearate particles are only partially hydrophobic due to the special production process. Therefore the antitack agent within the dilution shows the tendency to rise to the upper third of the dip tank. While the compound leaves the dip tank, it passes through the region of highest concentration and gets the optimum coverage of an-titack agent.

Momentive Performance Materials

LIM™ 6050-D2

LIM™ 6050-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors. LIM6050-D2 offers convenient 1:1 mix ratio, high tear strength, and easy release from molds. Cure time is rapid, generally 10 to 40 seconds (@ 150-205°C) depending upon part size, configuration, and molding temperature.Key Features and BenefitsLIM6050-D2 liquid silicone rubber is distinguished by the following properties: High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

3D Systems

DuraForm® FR 100

DuraForm® FR 100 is halogen-free flame retardant plastic is suitable for Rapid Manufacturing of Aerospace and consumer products where flame retardancy and reduced smoke toxicity is required.In addition to meeting the flame retardancy necessary for many potential aerospace applications, DuraForm® FR100 has been formulated to reduce production of smoke and related toxic byproducts of combustion and achieve UL94 V-0 rating to meet the needs of today's human environmental safety for many other consumer applications.Applications Aerospace and aircraft cabin, compartment & cargo Computers Business equipment Electrical appliances Telecommunications equipment Building and structural components Transportation Complex, thin-walled ductwork Unmanned air vehicles (UAV's) Housings and enclosures Connectors Consumer goods and sporting products Vehicle dashboards and grilles Bumpers Rapid manufacturing Features Flame retardant Halogen and Antimony free FAR 25.853 (non-drip) compliant UL94 V-0 compliant Low smoke density and toxicity Excellent toughness and with good impact resistance Easy to process No emission of corrosive gasses Meets aerospace smoke density and toxicity requirements Benefits Offers toughness of injection molded plastics Build prototypes that withstand functional testing Produce durable end-use parts without tooling Create accurate and repeatable custom parts Increase market opportunities through flame retardancy.

BARLOG plastics GmbH

Keballoy® 3D FE 170302 PP

Special compound for 3D effect painting based on PP, e.g. B. For decorative applications in the automotive exterior.

Kumho Polychem

KEP® 2060

KEP® 2060 produced by Kumho Polychem is a highly functional special synthetic rubber that is mainly used for automotive parts and has excellent resistance to heat, ozone, and chemicals. With a lower specific gravity compared with other synthetic rubbers, it can be applicable for high-filling mixing, meaning it has a high economic feasibility.

Kettlitz-Chemie

Kettlitz Chemie Actigran 70

Mediaplast PM is a synthetic aromatic plasticizer based on polyalkylbenzene (bi- and trialkylated aro-matics), which is mainly recommended for the use in elastomers with low to medium polarity, i. e. NR, IIR, BR, SBR, EP(D)M for example, but also CR, CM/CSM, EVA and PNR. Especially in polychloro-prene the often used, expensive ester plasticizers can be replaced completely.

DuPont

TPSiV® 3345-65A Natural 25564 Thermoplastic Elastomer

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Momentive Performance Materials

LIM™ 6045

Toray

Amilan® CM3001-N

Amilan® CM3001-N is a Polyamide 66 (Nylon 66) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Kettlitz-Chemie

Kettlitz Chemie Silanogran SI-69/GR 70

Silanogran Silanogran SI-69/GR 70 offers improvement of mixing properties e. g. reduction in Mooney viscosity, better processability when mixing, calendering and extruding and influences the physical-mechanical data of the vulcanizates favorably.

DuPont

TPSiV® 4000-60A Black Thermoplastic Elastomer

TPSiV® 4000-60A SR thermoplastic elastomer is a UV stable material with excellent abrasion and scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on smartphones, portable electronic cases and wearable electronic devices.

Dioshy

Dioshy TPU T990M

Dioshy TPU T990M is a Thermoplastic Polyurethane with a soft segment compositions of a ester group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

Kettlitz-Chemie

Kettlitz Chemie Kezadol GR

Kezadol GR is a soft 81.5 % calcium oxide granule coated with special dispersing agents, for use as a desiccant in rubber compounds which are cured on micro-wave systems, LCM or hot air. Moisture which is present in all rubber chemicals, especially fillers, will be absorbed and the calcium oxide will change to calcium hydroxide after reaction with the moisture. This reaction will happen while storing the uncured rubber compounds.

BARLOG plastics GmbH

Kebaflex® P D35.1

Polyester elastomer, Shore D35

BARLOG plastics GmbH

Kebaform® / C 25 H

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

Elastron

SEBS - ELASTRON G501.A50.N.PS

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PS.

Aliancys

Palatal® P51-01

Kettlitz-Chemie

Kettlitz Chemie Silanogran PV

Silanogran PV is the 50 % granular form of a trimethoxy-silyl-group containing low molecular poly-butadiene (formerly Polyvest 25) on a mineral carrier. The pure liquid polymer is sticky and highly viscous. Our granular form provides easier handling, avoids inaccuracy and insecurity while dosing and incorporating the material into the rubber compound.

Dioshy

Dioshy TPU E980M

Dioshy TPU E980M is a Thermoplastic Polyurethane with a soft segment compositions of a ether group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

DuPont

TPSiV® 5300 A 6002 Natural Thermoplastic Elastomer

TPSiV® 5300 A6002 thermoplastic elastomer is a low odor, plasticiser-free thermoplastic elastomer with excellent bonding to polypropylene and polyethylene. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

DuPont

TPSiV® 3345-65A Custom Color Thermoplastic Elastomer

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

DuPont

TPSiV® 3345-65A Black 25565 Thermoplastic Elastomer

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

DuPont

TPSiV® 3345-65A BK029 Thermoplastic Elastomer

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

DuPont

TPSiV® 4000-50A Natural Thermoplastic Elastomer

TPSiV® 4000-50A SR thermoplastic elastomer is a UV stable material with excellent abrasion and scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on smartphones, portable electronic cases and wearable electronic devices.

DuPont

MULTIBASE™ MB40-006

DuPont MB40-006 Masterbatch is a tribological modifier for polyacetal based systems. This additive is an easy to handle pellet. DuPont MB40-006 Masterbatch unable you to achieve lower coefficient of friction compared to standard PTFE. Typical additivation levels between 2 and 5wt% show highly efficient coefficient of friction reduction by at least 20% vs corresponding 15-20wt% PTFE formulations against POM and stainless steel. DuPont MB40-006 masterbatch allows you to recover lost mechanical performances (tensile and impact) vs standard PTFE and reach initial performances of neat polyacetal. DuPont MB40-006 Masterbatch is also highly efficient at suppressing stick-slip phenomenon at low speed when used in applications against steel following VDA 230-206 norm. DuPont MB40-006 Masterbatch suits for long term applications.

BARLOG plastics GmbH

Kebablend® / H 27.1200 PBT FE 161105

KEBABLEND / H 27.1200 PBT is a functional compound based on PBT with high density.

Ingenia Polymers

Superlink™ 110

Superlink™ 110 is developed by Ingenia for the manufacture of parts to offer a unique combination of high stiffness, low temperature impact properties and excellent ESCR performance. Superlink 110 is UV stabilized for extended outdoor service and is available in natural, black and customer-specified colors. Superlink 110 in various colors will retain at least 80% of each nominal property given below for the natural compound.

Hughes Polymer Additives

Ficel® AZ 4

Ficel® AZ 4 is used as Flexible PVC, Polyolefin/Plastisol/Rubber.

Kettlitz-Chemie

Kettlitz Chemie Antitack NP-97/TY-40

Antitack NP-97/TY-40 is a highly concentrated dispersion of zinc stearates. By means of new tech-nologies and high quality raw materials the zinc stearate content could be increased to more than 40 %.

BARLOG plastics GmbH

Kebater® PBT A9045

PBT + X-GF45, 45% glass fiber reinforced, optimized surface quality, improved weld line strength and reduced tendency to warp, color settings with approval for food contact available.

Momentive Performance Materials

LIM™ 6040-D2

LIM™ 6040-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6040-D2 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds The combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

Aliancys

Palatal® P4-01