Products in EIFS & Insulation

SILRES® BS 5140 is an aqueous and water-dilutable emulsion of aminofunctional polydimethylsiloxane. It is used to provide water repellency to mineral insulation materials, particularly binder-free mineral wool, also known as blowing wool. Beside the hydrophobation of binder-less mineral wool, so-called "blowing wool, SILRES® BS 5140 can also be used at lower temperatures or for post-treatment of mineral wool.

VINNAPAS® 547 ED (ULS) is a versatile polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of plasticizers, organic solvents, or formaldehyde donors. The residual monomer content is below 1000 ppm. VINNAPAS® 547 ED (ULS) offers several advantages in a wide range of building chemical and construction applications. It exhibits high compatibility with cement, and its influence on cement setting is marginal.

VINNAPAS® 5044 N (KOR) is a dispersible polymer powder for dry mix mortars, specifically suited for ETICS, water-proofing membranes, and concrete repair. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5044 N (KOR) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

SILRES® BS 16 is an aqueous solution of potassium methyl siliconate used in diluted form for the hydrophobic impregnation of mineral construction materials, making them water-repellent. The water-repellent properties of SILRES® BS 16 are developed through its reaction with atmospheric carbon dioxide (CO2), forming polymethylsilicic acid. However, it should be noted that, like all siliconates, SILRES® BS 16 may cause a white deposit on the surface of colored construction materials if used outside the recommended application guidelines.

VINNAPAS® 5044 N (USA) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, water-proofing membranes, and concrete repair. It is based on a very flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5044 N (USA) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

SILRES® BS 1801 is a mixture of octyltriethoxysilane isomers, with iso-octyltriethoxysilane as the main component. It is used in its undiluted form as an admixture for the integral waterproofing of fresh concrete. SILRES® BS 1801 is highly recommended as a concrete waterproofing admixture.

VINNAPAS® 529 ED is a versatile, medium-viscosity polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of plasticizers, organic solvents, or formaldehyde donors. The residual monomer content is below 1000 ppm. It exhibits high compatibility with cement, and its influence on cement setting is marginal.

VINNAPAS® 4023 N is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, render and plasters, and skim coat. It is based on a semi-flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 4023 N is part of our standard range, offering the best-in-class solution for a wide variety of applications.

SILRES® BS 30 A is a stable, VOC-compliant blend of 100% active siloxanes and silicone resin. It imparts water and stain repellency to substrates while enhancing their appearance. Developed for treating mineral substrates commonly used in the tile industry, such as tumbled marble, limestone, slate, and saltillo clay tile, SILRES® BS 30 A is currently produced in the USA.

VINNAPAS® 4240 N is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, wall applications, and tile adhesives. It is based on a very flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility. VINNAPAS® 4240 N is part of our standard range, offering best-in-class solutions.

VINNAPAS® 5048 H is a very strong hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for ETICS, renders and plasters, and waterproofing membranes. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® H, which means that it provides a remarkable hydrophobic effect in addition to the basic properties of adhesion and flexibility.

VINNAPAS® 822 HD is a dispersion with excellent hydrophobic properties combined with very low flammability. VINNAPAS® 822 HD can be used as a binder for coating systems containing an opacifying pigment, such as polymer-modified plasters. VINNAPAS® 822 HD is a dispersion of a vinyl chloride, ethylene, and vinyl ester terpolymer.

VINNAPAS® 4036 N is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS. It is based on a semi-flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 4036 N is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 5844 E is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, waterproofing membranes, and concrete repair mortar. It is based on a very flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5844 E is part of our standard range, offering the best-in-class solution for a wide variety of applications.

SULF-N® Ammonium Sulfate - Industrial Grade (21-0-0-24S) is a research-tested and field-proven source of readily-available sulfate sulfur and loss-resistant ammonium nitrogen.

VINNAPAS® 546 ND is a high-viscosity polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content is below 1000 ppm. The dispersion is characterized by high bonding strength due to its high Mw PVOH content.

VINNAPAS® 5209 ED is a medium-viscosity polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content of the dispersion is below 1000 ppm. VINNAPAS® 5209 ED is a medium-viscosity product that exhibits high compatibility with cement, and its influence on cement setting is marginal.

VINNAPAS® 540 ED (ULS) is a medium-viscosity polymer dispersion based on vinyl acetate and ethylene. VINNAPAS® 540 ED (ULS) is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The dispersion is characterized by high bonding strength due to its high Mw PVOH content.

SILRES® BS Creme D is an aqueous, solvent-free injection product presented in the form of a silane-based cream. It is specifically designed for the prevention of rising damp by creating a horizontal barrier. It finds application in hydrophobic impregnation, impregnation of new and existing buildings, and masonry damp-proofing.

SILRES® BS Creme C is an aqueous, solventless, creamy, silane-based water repellent. It is a high-quality specialty product designed for the hydrophobic impregnation of both normal and reinforced concrete. It is commonly used in applications related to concrete protection, construction materials, hydrophobic impregnation, and infrastructure.

VINNAPAS® 5044 N is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, waterproofing membranes, and concrete repair mortars. It is based on a very flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5044 N is part of our standard range, offering the best-in-class solution for a wide variety of applications.

Cimsil A55G is a chloride-free, thixotropic powder additive that is developed to be used in cement and/or lime and gypsum systems. This product is a low-dust additive designed for improving properties in fresh and hardened state of mortars and concrete systems.

BroShield® RB-11 is a flame retardant additive designed to enhance fire resistance in polyurethane foams. With its liquid form and low viscosity, this versatile solution is easily integrated into production processes. Available in both drums and totes (IBC) packaging, BroShield® RB-11 ensures convenient handling and storage. Its flame-retardant properties make it suitable for industrial additives and materials applications, particularly in polyurethane foams used in the building and construction sector.

Crestafire® P1-3001PA is a filled, pre-accelerated, fire retardant unsaturated polyester resin. It incorporates a selected grade of alumina trihydrate (ATH) which makes it suitable to produce laminates where excellent resin flow, fire retardancy, and low levels of smoke and toxic fumes are required. It is halogen-free and does not contain heavy metals.

Crestafire® P1-3001E is a filled, fire retardant unsaturated polyester resin. It incorporates a special grade of alumina trihydrate (ATH), which makes it suitable to produce laminates where excellent resin flow, fire retardancy, and low levels of smoke and toxic fumes are required. Crestafire® P1-3001E is extra stabilized for transport, storage, and use in high-temperature climates. It is halogen free and does not contain heavy metals.

Crestafire® Bio P1-8001 is a versatile bio-resin with excellent fire, smoke, and toxicity properties and good mechanical properties, due to which the product can be used in the most demanding FST applications in the railway, building and construction, and other public transport industries. It is designed for applications where fireproof performance and natural origins are key to the final product.

MOCOM Compounds ALTECH® PP-B A 4430/120 MR30 UV is a Polypropylene Heterophasic Copolymer with 20% chalk, 10% talcum, and UV, heat, and processing stabilizers, as well as easy release (demolding) properties. For injection molding, a melt temperature of 200-250°C and a mold temperature of 20-70°C should be used. This thermoplastic is suitable for building and construction, electrical and electronic, and sport and leisure market segments, and can be used for domestic appliances, gardening tools, and exterior parts. Typical applications include housings, fixing elements, and functional components.

MOCOM Compounds ALTECH® PP-H FC 1000/100 DS is a polypropylene homopolymer that has special features such as detergent solution stabilization, good hydrolysis resistance, easy release (demolding) and a slip agent, as well as being heat stabilized. It is suitable for use in the electrical and electronic, packaging, and building and construction markets for applications such as food contact, injection molded parts and exterior parts. Typical applications include functional components and housings. For injection molding, processing should be done with a melt temperature of 200-240°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® PP-B B 2020/550 GF20 Pre-Drying Conditions is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. The base polymer is a polypropylene copolymer with a filler/additive system of 20% glass fibers that is chemically coupled, processing stabilized, and has easy release (demolding) and heat stabilizing features. The market segment for this material is building and construction, packaging, and its application areas are household goods, power tools, exterior parts, and filter systems. Typical applications include racking/shelving, handles, housings, and functional components. For storage, this material should be kept dry, protected from light, and not above 30°C.

MOCOM Compounds ALTECH® PP-B A 2040/150 GF40 CP is a Polypropylene Heterophasic Copolymer with 40% glass fibers, chemically coupled, with an easy release (demolding) agent, and heat stabilization. It is suitable for the market segments of machinery, electrical and electronic, building and construction, and suitable for applications such as sports equipment, interior decoration/finishing, exterior parts, and electrical components. Typical applications include functional components, housings, and fixing elements.

MOCOM Compounds ALTECH® PP-H A 2045/500 is a Polypropylene Homopolymer with 45% glass fibers, heat stabilized, extrusion grade, low emission, and processing stabilized. It is suitable for Pre-Drying Conditions in an air circulating dryer 80-120°C for 2-4 h, or in a dry air (dessiccant) dryer 80-120°C for 2-3 h. Processing Injection molding is done at a melt temperature of 200-250°C and a mold temperature of 20-70°C. This product is used for building and construction, sport and leisure applications, such as functional components, housings, and sports equipment. It should not be exposed to strong UV radiation and should not be stored in direct sunlight.

MOCOM Compounds ALTECH® PP-B B 4020/506 MR20 is a polypropylene copolymer with 20% mineral filler/additive system featuring easy release (demolding), processing stabilized, heat stabilized, and easy flow properties. It is suitable for the packaging, building and construction market segments, and typical applications include housings, functional components, and fixing elements. For processing injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C.

MOCOM Compounds ALTECH® PA6 B 1000/270 is a Polyamide 6 base polymer with good flow and easy release (demolding) properties, making it suitable for use in the building and construction market segment. It is typically used for housings, clips, and functional components in exterior parts and injection molded parts.

MOCOM Compounds ALTECH® PP-B A 4930/506 TV30 is a heat stabilized polypropylene heterophasic copolymer with a 30% talcum filler/additive system. It is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C, providing features such as easy release (demolding) and good flow. It is suitable for use in building and construction, as well as in sport and leisure applications, such as functional components, housings, fixing elements, and bezels. Pre-drying should be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours, or an air circulating dryer at 80-120°C for 2-4 hours.

MOCOM Compounds ALTECH® PA6 A 2050/720 GF50 UV is a polyamide 6 with 50% glass fiber filler/additive system that is heat stabilized, highly UV stabilized, processing stabilized, nucleated, and easy release (demolding). For injection molding, melt temperature should be between 270-290°C and mold temperature should be between 80-100°C. This material is suitable for building and construction, and its application areas include exterior parts, gardening tools, and housings.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXMP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.