Products in Building Envelope & Roofing: Unsaturated Polyester (UPE)

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Crystic® Polyester Resin 406COS is a non-thixotropic, non-accelerated, orthophthalic unsaturated polyester resin used for casting, artificial marble, and solid surface applications. This product has a 5-minute gel time. It contains UV absorbers, allowing very good resistance to yellowing and UV radiation.

Crystic® Polyester Resin PDME 074 is an acrylic modified orthophthalic unsaturated polyester resin developed specifically for the manufacturing of maximum clarity roofing sheets by continuous sheeting process. It is ultra violet stabilized by the addition of special anti UV additives. The resin also contains acrylic monomers to reduce long term yellowing of the laminates.

Crystic® Polyester Resin 125PA is a quality orthophthalic-based unsaturated polyester resin developed specifically for the manufacture of GRP moldings. This medium-viscosity polyester resin meets the requirements of BS 3532:1990 as a type "A" resin and can be used for flat surface laminations. Laminates made with this product have good mechanical strength, high rigidity and impact resistance, and excellent dimensional stability. When used with the recommended curing system, its curing properties make it especially suitable for fast production processes.

Crystic® Polyester Resin 1124PA is an orthophthalic, low-viscosity, unsaturated polyester resin. It is supplied as a solution dissolved in monomeric styrene. This product is pre-accelerated to give a sufficient pot life for contact molding using Andonox® KP9 at normal ambient temperatures. It has been formulated to give a rapid cure time while retaining a usable pot life and a normal peak exotherm temperature. For an extra-rapid cure, the use of acetoacetonyl peroxide (Andonox® PD40) is recommended.

Crystic® Resin S15.6 is a very flexible unsaturated polyester resin based on adipic acid. It can be used alone or in conjunction with other polyester resins for the manufacturing of flexible products. Impregnating resins particularly isophtalic resins can be flexibilised by addition of Crystic® Resin S15.6 without any significant impact on the chemical resistance properties.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

ISO112 is an isophthalic unsaturated polyester resin type 1140 according to DIN 16946-2. ISO112 is particular indicated in outdoor application.

USP-EAGLE (RS18-65) is Unsaturated Polyester resin with high clarity, very good transparency as the refractive index of cured resin matches that of E-glass fiberit is used in the manufacturing of roofing sheets by continuous lamination.

T19X9 is an orthophthalic unsaturated polyester resin tixotropic, preaccellerated , and catalysis indicator. T19X9 is mostly used in hand lay-up application.

Norsodyne® BR-270A - multicolor application, flexible type, thixotropic, good workability, for rods production. Main applications areas are leisure and clothing etc.

DISTITRON® 3519 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

Distitron® 3519A1V5 - preaccelerated, UV stabilized. Main applications areas are furniture, home and domestic applications etc.

Norsodyne® CMC15100W - orthophthalic resin for marble and onyx, promoted and waxed, low viscosity. Main applications areas are building and construction, industrial sector etc.

Stypol® 040-8123 - pre-promoted unsaturated polyester laminating resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

DISTITRON® 1402 AN2V3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding method.

BRE 365 is a Flat sheet and corrugated sheet with medium reactivity.

DISTITRON® 3501 S - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce statues through casting method.

DISTITRON® 110 SXZ - Unsaturated polyester resin in styrene,DCPD. It is used to produce reinforced plastics,general purpose through hand lay up and spray up method.

Stypol® RSP10021 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

POLYCOR® ISO NPG BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed

DISTITRON® 161 T100Z - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce buttons through casting (rods) method.

KPR 6420 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6420 is suitable for processing by pultrusion. Recommended for FRP composites.

NORSODYNE® H 13239 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through hand lay up and spray up,filament winding method.

NORSODYNE® O 12335 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce inclusion through casting method.

DISTITRON® 510 V5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flat sheets,laminates,transparent and corrugated sheets through continuous laminating method.

Polydyne® 5056 is used for general purpose and gel coat formulation. Main applications areas are composites, eyewear and jewelers, textile industry etc.

Polydyne® 6028 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.

Kemperol® BRM is a two-component including catalyst, high performance seamless and self-terminating cold-liquid applied, reinforced unsaturated polyester membrane system for exterior applications.

Norsodyne® BR-290EXT - multicolor application, thixotropic, good workability, for rods production. Main applications areas are leisure and clothing etc.

Polydyne® 6023 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.

Polydyne® 6010 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.