Products in Other Building Materials

ORCA CS MAT 1 1/2 OZ 22” ROLL. Orca Chopped Strand Mats consist of chopped glass fibers bonded together using a polyester powder. The mats are designed to be compatible with unsaturated ortho polyester, iso polyester, vinyl este and a variety of other resins.

Gemapilen® GF10 CP is 10% glass fiber reinforced PP Co-polymer and are manufactured with Homo-Polymer or Co-Polymer to fit requirement. They increases the mechanical properties of products much further than what can be obtained through the use of mineral based compounds and enhancers or natural blends. It is an alternative to straight polymer use or mineral compounds are wide ranging and benefit a number of plastic manufacturing sectors.

Atlac® 580 AC300 by Aliancys is comprised of Vinyl Ester Resin. It is commonly used It is available in Liquid form.

Hangzhou Hi-Tech Fine Chemical ATH-6S is a flame retarding for a variety of rubber and plastic products, such as mining transport belt, hose, rubber, carpet, rubber gaskets, wire and cable materials and sheathing, building materials, especially for blocking free foaming processfuel in the production of the bubble can be given to the characteristics of products, flame retardant, smoke, anti-static.

Standard Solvent Rubber Mounting Adhesive – MES is a mounting adhesive featuring a 1 mil clear polyester carrier with .75 mils of solvent rubber adhesive coated on both sides. The adhesive is protected by a 60# moisture stable liner. Standard solvent rubber mounting adhesives feature a high initial tack and are intended for indoor mounting applications. General mounting adhesives are two sided adhesive products (two sided tapes) designed to create a permanent bond between two items, typically printed media and a substrate such as foam board or Gator™ board. General mounting adhesives feature a carrier film that is coated with adhesive on both sides and protected by a single release liner.

E-1836-PL VP, natural color compound, hasan balance stiffness and impact resist, designed for extrusion profile, edge bending.

ROMILOY® 1015 ER is PC/ABS, extrusion and injection molding grade, high-impact, high heat resistance.

Tovo Gomma T 30 EVB is a rubber compound which is white in color and having PE composition.

Sylvin™ 9980-95 White 1461 is a vinyl compound formulated for molding applications.

APCM DA 4090 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

This is a family of con�nuous filament reinforcing mats designed for pultrusion processes. They are treated with a suitable bonding resin and coupling agent and have good handling proper�es and good weight uniformity.

ORTHOPHTHALATES TP1006 is a Preaccelerated,Tropicalized, Thixotropic Laminating Resin.

The properties are essentially comparable to those of LiNNOTAM. By using a stabilizer, the thermal-oxidative Counteracted material degradation when exposed to temperature. In comparison to pure cast polyamide, higher usage temperatures can be achieved realize.

Libwax OP is a Synthetic Wax. LIBWAX - OP is a waxy external lubricant Useful for rigid PVC as well as flexible PVC Compounding / processing.

Sylvin™ 8312-70FUV Natural is a vinyl compound formulated for coextrusion with rigid. This compound contains a antimicrobial and a ultra violet stabilizer.

ROKAmid KAD is a nonionic surfactant called INCI Cocamide DEA. It is produced on the basis of natural vegetable oils. It has the form of a clear or slightly turbid liquid from light yellow to yellow. ROKAmid KAD belongs to the most widespread co-surfactants and has a number of very interesting application properties.

Sylvin™ 8240-98FU White 1513 is a vinyl compound formulated for outdoor extrusion applications. This compound contains an antimicrobial at 2% and 5% titanium dioxide.

Badaprene® TPV 55A 1010 by Bada AG is comprised of Ethylene Propylene Diene Terpolymer and Polypropylene (unspecified). It is commonly used It is available in Granules form.

Armlen PP MD 40-11TS is a 40% mineral filled, thermostabilized polypropylene. This material displays high mechanical and electrical properties; is resilient to cold and hot water, alkali, acids and detergents, organic polar solvents (acetone, spirits etc.), benzene fumes. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in white color.

Ebalta AH 110 / TGS is a non-filled epoxy resin with high strength and dimensional stability, even at increasing temperature. It also can be used as casting resin with powder fillers as aluminum powder, as laminating resin with glass fabrics and as binding resin with granular fillers as aluminum granules. Depending on the application if just needs to use a different hardener for the mixture. As laminating resin AH 110 / TGS is suitable for thin high solid laminates.

Golden Compound 7056 BO green characterize the ready-to-use solutions based on the fibers of sunflower seed hulls, that have been developed for many applications and markets. In addition, all materials for injection molding, which require good processability, density and impact resistance, have been optimized.

Palatal® P50-01 by Aliancys is comprised of Polyester (unspecified). It is commonly used It is available in Liquid form.

70 Shore A TPENoble Polymers Flextuff series of Thermoplastic Elastomer Compounds (TPE) offer rubber-like feel with the ease of processing and recyclability of a thermoplastic. This unique family of products are developed using the highest quality raw materials and additives to create soft feel materials in a wide range of hardness levels for both injection molding as well as extrusion processing methods.Flextuff TPE compounds are used in applications such as grips, seals, over-molded handles and many other applications in the commercial, automotive, sports and leisure and building and construction industries.Features Include:Durometer (hardness) range from 25 - 90 Shore AAvailable in natural, black or custom colorsAdditive packages include: UV stabilization, scratch and mar resistanceFormulations for injection molding as well as profile extrusionCustomized formulations available to meet your specific needAll Flextuff products are 100% recyclable

S V Plastochem Di Basic Lead Stearate is used in excellent heat stabilizer for opaque rigid applications.

Polyumac Stru-Cell Structural PVC P100 is a high performance PVC foam core that sets the standard for sandwich composite structures. As well as its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures and its closed-cell construction means that it does not absorb water.

MultiPet C-04 from one way bottles, post consumer.

Karilen® PH 3070 T is a reinforced homogeneous polypropylene compounds. It consist 70% talc and is processed using stiffness modifier.

Lucofin® 1410MB by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

POWDER™ EVA M 0207(7% vinyl acetate) is used in Street Furniture, Constructions (road barriers, rubbish chutes), Furniture (lamps, coat racks, chairs), Treatment of water (tanks, reservoirs, silos) and pots.

Shanghai Potomer International Company PVC SG5 is Calcium Carbide base, mainly used in sewage pipes, pressure pipes, rigid profiles, window frames and in electrical ducts.

Longchem PVC Resin SG5 is made by the suspension polymerization of vinyl chloride monomer. The molecular formula (CH2 - CHCl) n - (N: degree of polymerization, N= 590 ~ 1500).

COMFIL offer fabrics of the produced thermoplastic composite yarns.

Lucofin® 1414-t1 by Lucobit AG is comprised of Polyethylene Copolymer. It is commonly used It is available in Granules form.

Crown Foam Technologies High Density Vinyl Foam 15#+ is characterized by exceptional cell structure which permits the foam to be used in aggressive environments that require internal strength paired with product durability. This vibration dampening, tear resistant foam seals out air dust and moisture while contouring to the required shape.

UltraPly™ TPO Membrane is a flexible Thermoplastic Polyolefin roofing membrane that is produced with polyester weft- inserted reinforcement. UltraPly TPO membrane meets or exceeds all requirements for ASTM D 6878 Specification. This heat weldable TPO membrane is available in 45 mil (1.14 mm) and 60 mil (1.52 mm) thicknesses. This reflective membrane is suitable for a variety of low-slope applications.

JETaFLOW™ Primer has the advantages of improving the bond and spread of JETaFLOW self-leveling mortar and not re-emulsifying it.