Brands in Wall Panels

Styrene is a solvent, nr and synthetic resins-based adhesive. Adhesive with strong fixing power for all types of materials, including expanded polystyrene.

Kauropal products are used in decorative overlay paper to impair higher gloss retention and better scratch resistance. These impregnating resins are also used to add functionality to furniture or finish foils & edge bending. They provide better wetting, higher flexibility, higher efficiency and higher hiding power for white decorative films. Kauropal resins are also used for laminate floorings, to enhance antistatic properties and to develop higher efficiency under unlimited shelf-life

CEDEPAL® is an anionic surfactant with maximum foaming power. It is used a as foaming agent in wall board and finds application in concrete admixtures.

The VINNAPAS® eco product line stands for polymer dispersions, dispersible polymer powders and solid resins derived from renewable raw materials via the biomass balance approach. VINNAPAS® eco grades are chemically identical to the corresponding basic VINNAPAS® products. VINNAPAS® eco dispersions, dispersible polymer powders and solid resins are manufactured using the biomass balance approach. This means that fossil raw materials are entirely replaced in the supply chain by renewable raw materials that are certified as sustainable. WACKER uses bio-based acetic acid that is a byproduct of the wood-processing industry and is certified as sustainable by PEFC® (Program for the Endorsement of Forest Certification). The bio-based acetic acid is introduced at the beginning of the production cycle. The biomass balance approach mathematically determines the percentage of dispersions, dispersible polymer powders and solid resins made from renewable (non-fossil) raw materials. VINNAPAS® eco grades are certified to the REDcert2 standard and audited by TÜV NORD, an independent German technical inspectorate.

Crystal Clear is a clear, acrylic coating, available in many formulations to achieve a variety of “wet looks” and sheens. All formulas will highlight and darken the natural appearance of the stones or masonry surface.

Seal Bond manufactures an extensive selection of adhesive and sealant formulas for product assembly and manufacturing applications. Our unique chemistry provides the ability to bond to a wide range of substrates making it an excellent choice for marrying dissimilar materials. Our sealants and adhesives do not require heat for application or cure which reduces overhead and maintenance costs.

Since 1916, over 250 million gallons of coatings and paints has been manufactured from Cruspec. Continental Products has the ability to provide a vast library of formulations to meet your composition and specification needs. Cruspec designs the paint that works best for your project. ​Cruspec formulates paint for a purpose.

SURFA-TEX is a textured, water based acrylic wall and ceiling coating for exterior or interior use. It is durable, hard and available in a wide range of textures and colors.

Plaster-Weld® bonds new plaster to any clean, structurally sound, interior surface. The original chemical plaster bonding agent is a patented formulation incorporating polyvinyl acetate homopolymer. Designed for Interior Use only, the high performance bonding of one-coat finish plaster and/or two and three coat work to concrete ceilings, walls, columns, beams, and other structurally sound surfaces. Plaster-Weld® prepares the surface to allow you to plaster directly to concrete over electric radiant heat cable, and to bond cement mortar beds to smooth concrete for installation of rigid foam insulation. Concrete, brick, block, glass, ceramic tile, wallboard, metals (e.g. sheet lead in x-ray rooms) and marble are suitable sound surfaces, structurally. Plaster-Weld® can be used over paints having oil, rubber or vinyl bases, and over silicone-treated surfaces, as well as latex paints.

AllPrime is a premium, water based, primer for interior use. AllPrime is manufactured using a 100% acrylic resin system providing good adhesion, water, and alkali resistance, and stain blocking properties. AllPrime produces a moderate film build and is sandable.

HydroBlok® sealer is a waterborne, non-flammable, silicate penetrating solution it is specifically designed as a concrete sealer/densifier for stopping moisture migration or major seepage of blocks, concrete decks slabs, walls, driveways, foundations or old porous concrete. HydroBlok® is produced specifically for sealing heavyweight CMU (concrete masonry units). This is a user friendly product that will seal CMU structures under the most difficult conditions and leave the concrete blocks paint-able if desired. This spray on product is designed for new or old heavyweight CMU structures and will seal your blocks easily and effectively.

Hydrasheen is a non-yellowing, water based compound that offers outstanding curing, sealing, dustproofing, increased abrasion and chemical resistance for freshly finished concrete surfaces. On older concrete surfaces, Hydrasheen will simultaneously seal and dustproof while extending service life and minimizing maintenance costs. Hydrasheen has been formulated to form a membrane film on the surface of the concrete that optimizes water retention for maximum concrete hydration and compressive strength.

Acronal® is a range water-based emulsions. Acronal® range for exterior paints covers styrene and pure acrylics which offer a very high durability against the influence of weathering. Acronal® range for wood and trim paints offer a very high durability against the influence of weathering. In addition, our styrene acrylics have an outstanding chemical resistance, which is very important for exterior applications. BTC’s range of Acronal® dispersions covers both selfcrosslinking and non selfcrosslinking dispersions. BTC’s range of Acronal® types give decorative foils, filters and wallpaper excellent mechanical properties. In air and oil filters for the automotive industry they improve durability and performance. In high-quality decorative paper foil, our binders ensure a high level of stability of the bonded fibers. To abrasives our binders ensure the abrasives flexibility and reduce abrasive particle wear. BTC’s Acronal® types for natural fibers are acrylic dispersions. BTC’s range of Acronal® types give nonwovens made of synthetic fibers their exceptional and different functional properties.

ARDEX X 90 OUTDOOR™ MicroteC3 rapid-set, flexible tile and stone mortar is a revolutionary innovation in mortar technology that is formulated with specialty, high-performance ARDEX cements, polymers and microfibers to deliver maximum protection against the harshest weather conditions and provide the highest levels of efflorescence resistance for exterior tile and stone applications. ARDEX X 90 OUTDOOR can be installed over substrates with temperatures as low as 40˚F (5˚C) and can withstand driving rains or be grouted in only 2 hours.

Colorfast™ strengthens the glue that binds the wood cells together, called lignin, preventing yellowing of the underlying wood cells to help maintain a consistent color year after year. Before staining, Colorfast™ evens out wood porosity, creating a smoother surface for stain application and preventing over-absorption and a too-dark color. After staining, the lignin stabilizers prevent the wood underneath from getting sunburned, leaving the stain applied on top looking the same year after year. Colorfast delivers the ideal canvas for stain application and leaves behind the strong foundation necessary for long-lasting color.

Tinuvin® light stabilizers show best performances regarding their thermal stability, substrate compatibility, volatility, absorption range, or regulatory classification as needed. BTC’s Tinuvin® light stabilizers provide effective protection against UV absorption for inks and printing.

LUMAsite& is American Acrylic's trademark for fiberglass-reinforced acrylic panels, and for fiberglass- reinforced acrylic-modified polyester panels. These shatterproof sheets combine the attractive appearance and long term outdoor durability of cast acrylic with the strength and translucent beauty of the glass fibers. Whites and colors intended for signs and displays have these fibers to impart strength and durability, but they are not visible. In most lighting and architectural varieties, the fibers are deliberately visible, lending an exotic "silken cobweb" effect. Graceful rice paper and frosted effects, translucent and opaque white varieties, delicate tints, bright colors, and fabric and mesh embedments offer architects and designers many choices for lighting and translucent panels.