Products in Flooring & Surfaces: Acrylics & Acrylates

Goonvean Fibers TEC03CON316 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

Vinylsol 1606 A is an emulsion (polymer microparticles) obtained by the emulsion polymerization of monomers such as acrylic ester and vinyl acetate. Monomers can be selected to control glass transition temperature (Tg) to a desired level whereby allowing the use of VINYSOL in a variety of applications such as pressure-sensitive adhesives, paint and ink binders, and textile hard finishes.

bossin® W-106 is a suitable pigment for dispersion, flexibility and biological degradation.

LUMAsite® Crystal II is Near-clear product.

ECRHARVEST250M is a Varia Harvest . .250” Gage.

Flowlen AC-202 is Superior defoaming for flooring and heavy duty paints. Works strongly on urethane. (Note: May result in clouding or precipitates in winter.)

Tremco CPG Netherlands SF105 Acrylic Adhesive for PVC and Linoleum is a thixotropic water-borne floor covering adhesive.

Helmibond 870 is a solvent-free, conductive, acrylic adhesive formulated to permanently install conductive resilient tile and sheet flooring, rubber tile flooring and rubber sheet flooring. To insure product stability and reduce joint openings, Helmibond 870 has been formulated to produce a hard set and firm bond line less susceptible to indentation and telegraphing. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.

LUMAsite® Ivory 02146-SOS is Creamy white and translucent in nature.

DuroAcro® DP927 is a vinyl acetate, maleic anhydride or acrylate copolymer.

Armor WB25 is a water-based acrylic cure and seal designed to seal and protect concrete and paver surfaces with a durable high gloss surface film. The Armor WB25 is a fantastic sealer if you are looking to enhance surfaces with a high gloss finish. The Armor WB25 also doubles as a cure and seal and can be applied to new concrete.

SANCRYL 847 60 X is a hydroxylated acrylic resin for two component coatings.

ECRSOLORED118M is a Varia Pure Red / .118” Gage.

LPAMBERMAPLE1924M is a Formica Amber Maple / .032” Photopolymer.

Soudacryl C834 is a one-part siliconised acrylic latex caulk designed for both interior and exterior use. Soudacryl C834 should only be used where moderate joint movement is anticipated.

Aqueous, self-crosslinking pure Acrylic emulsion,

TPA-696 is a Thermoplastic acrylic copolymers.

Armor LV25 is a solvent-based high gloss acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. Color packs are available and can be mixed in to provide an opaque-colored gloss finish. Non-slip additives are also available.

INSS0285 Smoke and Acoustic Sealant is a high-performance acrylic based sealant for sealing construction joints and through penetrations in non fire-rated assemblies.

PREGNIT TP-AC is high gloss, scratch resistant.

ECRVIAAQUA250M is a Varia Via Aqua / .250: Gage.

Akuapol AL 2300 is a NP Free and used as Floor top coating, wood coating.

Cipadeck® Paver & Concrete Sealer (LS) is a clear solvent based acrylic resin sealer for interlocking pavers and concrete. This sealer is available in gloss and anti-slip finishes that will not yellow on exterior exposure.

ECRWALNUT118M is a Varia Walnut / .118” Gage.

LUMAsite® Brown 239-SO is Dark brown and opaque.

CASA 240-PS Pressure Sensitive Adhesive is a versatile, water-based, clear acrylic co-polymer adhesive that is solvent free, low odor, contains no hazardous chemicals, for use with vinyl sheet flooring and carpet tiles.

Goonvean Fibers TEC03CON406 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

DRYLOK® WetLook Clear High Gloss Penetrating Sealer is a clear, nonyellowing, water-based acrylic coating formulated for use on interior or exterior masonry surfaces. Provides superior hardness and durability. Protects against efflorescence (white, powdery, salt-like deposits) visible on the masonry. Built in flash rust resistance prevents orange staining of surface when applied to masonry containing natural metals. Excellent chemical resistance to de-icing salts. Compatible with polymeric sand.

Weatherskin Coatings WSM1 Above-Ground is a multi-use, extremely durable acrylic coating. At an ideal wet film thickness of 10-14 mils per coat (8-10 mils dry film finish per coat), WS M1 is a perfect fix for sealing any minor cracks and imperfections. With exceptional aging properties, future ruptures, cracks and de-laminating are prevented, and provides long-lasting protection to the substrate surface. Its unique properties allow for substrate movement and accommodation to sudden temperature fluctuation. WS M1 is to be used in tandem with the instructions outlined in the following Product Information Sheets. WS M1 creates a strong, solar reflective and UV resistant coating able to withstand and encapsulate mold, fungi and mildew growth.

bossin® W-123 has a high UV curing activity with no solvents and dilute with 20%TPGDA.

Acryrub Fireblock is a one-part noncombustible sealant used for fireblocking applications around wires, pipes, ducts, vents, cable lines and other penetrations to the building envelope.

MPD Industries UVP 0600 99 is a difunctional Bisphenol A epoxy acrylate. This product is characterized by its light color and high reactivity.It is mainly contributed by the epoxy resin backbone consisting of Bisphenol A and epichlorohydrin reaction product. The two acrylic groups contribute the excellent UV and EB curing properties.

Tackfix 48 is an acrylic based hot melt adhesive for instantly bonding tack strip to concrete and ceramic floors. It bonds to metal, ceramic, stone, wood, brick, concrete, tiles, plastics, fiber cement board and many other surfaces

Aqueous, self-crosslinking pure Acrylic emulsion with free hydroxyl groups, fine-particle size, solvent- and plasticiser-free

43 Acrylic Latex Additive is a commercial Acrylic Latex-based Thin-Set Tile Mortar Additive for use with Flextile 51 Premium Floor & Wall Thin-Set Mortar or with Flextile 53 Floor Mix for use in installing most ceramic tile and stone on properly prepared interior or exterior surfaces

OPTICRYL 3145 by OPTICHEM is a Pure Acrylic Polymer Base. It has Premium grade Pure Acrylic Binder for exterior and roof coating.