Brands in Performance Flooring

Santicizer® Plasticizers offer all the benefits of high solvating plasticizers including compatibility in multiple polymer systems such as Polysulfide, PVC and Polyurethane. Because of their high efficiency, less energy is required to fuse PVC formulations. These materials are well suited for plastisol applications, but can easily be used in almost any polymer system that requires additional flexibility and softness.

METABLEN™ is the trade name of modifiers, which have been developed originally by Mitsubishi chemical, a world prominent manufacture of methyl methacrylate resins. Adding a small quantity of METABLEN™ to various resins improves and increases their impact strength and processability, and further improves the characteristics, the appearance and the productivity of their final products. *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Bermocoll is used as a thickener, stabilizer and water-retaining agent for water-based decorative paints. It also controls consistency, providing easy workability, extended open time and enhanced adhesion in cement and gypsum based systems.

20 Microns manufactures Calcium Oxide Desiccant under it brand “Vaporoxol” which is the most economical and old line desiccant; its essential component is calcium oxide, which absorbs moisture by chemical reaction. Compared with silica-gel, it has high ability of absorption of moisture, can ensure the retention period of material for more than six months. Calcium oxide desiccant is most effective where low critical relative humidity is necessary, and where there is a high concentration of water vapor present. Vaporoxol reduces blistering, bubbling and pin hole due to inherent moisture by high shelf life treated calcium oxide desiccant. The calcium oxide is coated by a chemically indifferent hydrocarbon. Due to this preparation vaporoxol has reduced air pollution. Additionally there will not be any unintended reaction with humidity.

ESPOLEX® TPE Series is distinguished by offering many low-density grades that can provide substantial weight and cost savings over higher-density thermoplastic elastomers.

The Gabrosa granular grades are characterized by a lump free dispersion and fast dissolution in water. Gabrosa adhesives can be applied easily with a brush or pasting machine, exhibit excellent wet tack and (re-)positioning properties, have a more than sufficient open time and adhere strong on all kind of surfaces. Nouryon is supplier of Blisterfree wallpaper adhesives. Due to their excellent properties the base products can be used as standalone adhesive. To optimize requirements the Gabrosa grades can also be used in blends.

Acronal® is a range water-based emulsions. Acronal® range for exterior paints covers styrene and pure acrylics which offer a very high durability against the influence of weathering. Acronal® range for wood and trim paints offer a very high durability against the influence of weathering. In addition, our styrene acrylics have an outstanding chemical resistance, which is very important for exterior applications. BTC’s range of Acronal® dispersions covers both selfcrosslinking and non selfcrosslinking dispersions. BTC’s range of Acronal® types give decorative foils, filters and wallpaper excellent mechanical properties. In air and oil filters for the automotive industry they improve durability and performance. In high-quality decorative paper foil, our binders ensure a high level of stability of the bonded fibers. To abrasives our binders ensure the abrasives flexibility and reduce abrasive particle wear. BTC’s Acronal® types for natural fibers are acrylic dispersions. BTC’s range of Acronal® types give nonwovens made of synthetic fibers their exceptional and different functional properties.

VISIOMER® Specialty Methacrylates offer an innovative way to customize product properties for various end use applications. With a range of alkyl/aryl (meth)acrylates, aminofunctional monomers, methacrylamides, ether methacrylates, crosslinkers, HEMA for contact lenses, wet adhesion monomers and specialty intermediates, VISIOMER® has become a trusted partner in designing customized products to meet specific needs.

NOBLEN® TPO is a complete line of TPO's to meet any OEM requirement including high flow and low density grades with superior scratch resistance. New material advancements allow Noblen® TPO to be used in a wide range of applications to save significant cost.

Kauramin impregnating resins are condensates of urea and formaldehyde and are used for the coating of laminate. They are characterized by their particular visual appearance as well as by excellent adhesiveness and high scratch resistance.

VINNAPAS® is WACKER’s brand name for a versatile range of polymer-based dispersions, powders and resins that are used to improve the properties and performance of products in a wide range of industries. The portfolio has been continuously improved and optimized since the 1950s. Thus, VINNAPAS® products set the standard and are leading in many applications.

HDK® Pyrogenic silica is a mature product that WACKER has produced for over 50 years and is used by customers worldwide with great success. Thanks to our integrated production system with statistical process control and highly efficient reactor dynamics, we produce pyrogenic silica of exceptionally purity. With HDK® you get not only great product performance, but also tailored customer service.