Products in Coatings & Markings: Rheology Modifier

MIN-U-GEL 400 is a hydrous magnesium aluminum silicate with gelling and rheological properties used to thicken and stabilize aqueous systems. MIN-U-GEL® 400 can be used alone or in conjunction with associative thickeners where a low shear thixotrope is needed to support the high shear thixotropy of the associative thickener. MIN-U-GEL® 400 was developed especially with controlled properties specifically to function as a binder during the production of molecular sieves.

RheoFal™ 101 is an easy dispersing organically modified bentonite clay. It is especially suited for low to medium polarity solvent-based paints and coatings. It provides excellent viscosity build, sag control and anti-settling properties in these coating systems.

Lithosperse® 7005 CS is a high performance treated kaolin designed to improve rheology with outstanding dispersibility and resistance to clay bleed in lithographic cold set inks. Lithosperse® 7005 CS has been designed for mix, pump and filter production systems to minimize filter plugging.

UVP 0205, Di Propylene glycol diacrylate (DPGDA) is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is an excellent low viscosity economical diluent .It is compatible with a wide range of acrylated resins.

SCG Chemicals LP1040P is a refined polyethylene homopolymer wax which is derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1O40P is guaranteed its high quality for various applications.

King Honor International KH FT WAX 120 is the coal-based Fischer-Tropsch wax. It has a higher melting point and the lower penetration. KH FT wax 120 is suitable to be used in road marking paints. Presently, the thermoplastic traffic marking paint is the most widely used on the roads as the autonomous vehicle guidance. It is generally composed of thermoplastic resin, pigments, and fillers. The addition of FT wax 120 can improve the dispersibility of pigment and filler in thermoplastic resin, and improve paint fluidity, prevent sedimentation, adjust viscosity, improved wear and stain resistance.

PalyGel® 325B is widely used in sealants & adhesives, asphalt coatings, joint compound, molecular sieve.

SCG Chemicals LP1024P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1024P is guaranteed its high quality for various applications.

MONORAL 3300 K is an unique synthetic amide wax applicable to a wide range of solvent base synthetic resin coating and develops an exceptionally strong and long lasting thixotropic structure.

Polybut EM 0 (NI-15) is a water-based emulsion of low molecular weight polybutene.

SCG Chemicals LP1100P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP11IOOP is guaranteed its high quality for various applications.

PalySorb® L6/16 is widely used in paints & coatings, sealants & adhesives.

PalyGel® 400A is widely used in paints & coatings, sealants & adhesives, asphalt coatings, joint compound, molecular sieve.

LAVIOSA VISCOGEL™ ED is a rheological additive for solvent-borne systems of low to medium polarity. that provides thixotropic effect, sag control, excellent leveling and prevents pigments from long-term storage settling. The nature of LAVIOSA VISCOGEL™ ED is a bentonite clay, organically modified with a quaternary alkylammonium compound. Unlike most of the other conventional organoclays, LAVIOSA VISCOGEL™ ED is self-activating and easily dispersible, hence simple and convenient to use.

MONORAL 3300H is an unique synthetic amide wax applicable to a wide range of solvent base synthetic resin coating and develops an exceptionally strong and long lasting thixotropic structure.

SCG Chemicals LP1020P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary Of SCC Chemicals co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1020P is guaranteed its high quality for various applications.

Polybut EM 200(A-50) is a water-based emulsion of low molecular weight polybutene.

Polybut EM MM 12(A-75) is a water-based emulsion of medium molecular weight polyisobutene.

PalySorb® R6/16 is widely used in paints & coatings, sealants & adhesives.

PalyGel® 400B is widely used in paints & coatings, sealants & adhesives, asphalt coatings, joint compound, molecular sieve.

Pine Rosins PR 388.1 is a Diethylene glycol esters of rosin that are obtained by the esterification of rosin with diethylene glycol. These resins are viscous liquids at room temperature and they are mainly used as tackifiers and plasticizers specially in floor coating adhesives, depilatory waxes and road marking paints.

LAVIOSA VISCOGEL™ XDS is a new high performing, highly effective rheological additive for solvent-borne systems of low to medium polarity. That provides thixotropic effect, sag control, excellent leveling and prevents pigments from long-term storage settling. Viscogel XDS disperses very easily even under low shear conditions. The nature of LAVIOSA VISCOGEL™ XDS is a highly purified bentonite clay, organically modified with a quaternary alkylammonium compound. Unlike most of the other conventional organoclays, LAVIOSA VISCOGEL™ XDS is selfactivating and easily dispersible, hence can be used at any point in the paint manufacturing process and can be used for post-correction.

Hubercarb® Q6 is a fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. Carefully controlled particle distribution allows the material to be used in a wide range of applications including paints, coatings, adhesives, caulks, plastics, and construction building products.

Polybut EM HR 1000 (A-75) is a water-based emulsion of low molecular weight polyisobutene.

PalySorb® L16/30 is widely used in paints & coatings, sealants & adhesives.

PalyGel® 500B is widely used in paints & coatings, sealants & adhesives.

Hubercarb® Q200 is a medium fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. The Q200 particle distribution offers a wide range of applications from carpet backing to cleansers, joint compounds to PVC flooring, concrete to oilfield drilling fluids where its low acid insoluble content is useful.

Polybut EM 30 (A-50) is a water-based emulsion of low molecular weight polybutene.

Polybut EM 0 (NI-50) is awater-based emulsion of low molecular weight polybutene.

Polybut EM HR 1000 (A-55) is a water-based emulsion of low molecular weight polyisobutene.

SCG Chemicals LP1040T is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1O40T is guaranteed its high quality for various applications.

PalyGel® 325A is widely used in sealants & adhesives, asphalt coatings, joint compound, molecular sieve.

Polybut EM MM 15(A-75) is a water-based emulsion of medium molecular weight polyisobutene.

Xinyu South Wollastonite XYNFW-SA is a typical metamorphic mineral, which has primarily occurred in contact belt between acid rock and limestone, and sometimes occurred in deep metamorphic Calc schist, volcanic product and in some alkaline rock. Wollastonite is a thin plate-like crystal of triclinic crystal system whichbelongs to a chain silicate. Its aggregation is radial or fibrous. Its special crystal structure determines its properties, Wollastonite with the advantage of non-toxic, acid and alkali resistant, low hygroscopicity, low oil absorption, low conductivity, good insulation, high whiteness, thermal stability and dimensional stability good, excellent mechanical properties and electrical characteristics. Wollastonite is a natural green, low carbon emission and energy saving industrial mineral.

Polybut EM MM 10(A-60) is a water-based emulsion of medium molecular weight polyisobutene.

Polybut EM MM 10(A-75) is a water-based emulsion of medium molecular weight polyisobutene.