Products in Infrastructure, Roads & Paving: Polyesters

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

Crystic® Polyester Resin 406COS is a non-thixotropic, non-accelerated, orthophthalic unsaturated polyester resin used for casting, artificial marble, and solid surface applications. This product has a 5-minute gel time. It contains UV absorbers, allowing very good resistance to yellowing and UV radiation.

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Crystic® Polyester Resin 397PA is a pre-accelerated isophthalic/neopentyl glycol polyester resin with a high heat deflection temperature and good water and chemical resistance. It is recommended for the fabrication of high-performance laminates for critical applications in aggressive environments. This product is suitable for contact molding and filament winding processes.

Domacryl 975 is a low viscosity general purpose polyester resin for two-component cold plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCManual application with smoothing trowels and draw box unitsPedestrian crossings, stop lines, direction arrows

Tecodur® PB30 NL by Eurotec Engineering Plastics is comprised of Polybutylene Terephthalate. It is commonly used

DISTITRON® 1629 EL5 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce pipes and tanks through filament winding method.

Norsodyne® 2625TI - thixotropic, promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Norsodyne® PT-201 - terephthalic-neopentylglycol resin for pultrusion, fast wet-out. Main applications areas are building and construction, industrial sector etc.

Polynt Group SUP 6000-1001 1210 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, reinforced with glass fibers. This BMC has been developed for façade panels. Sup 6000-1001 1210 joints excellent fire protection grade and high weathering resistance sup 6000-1001 1210 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

POLYCOR® ISO NPG BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed

NORSODYNE® Y 90286 - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce mastics,putties.

Polymac® 2360 is a very high reactivity, carboxyl-functional polyester resin for hybrid powder coatings. In combination with suitable epoxy resins E.E.W. = 700-950 in 50:50 ratio, this resin offers good flow, good chemical resistance and mechanical properties for interior decorative or primer coatings.

ENYDYNE® C 66141 L - Unsaturated polyester resin in styrene,DCPD. It is used to produce polymeric concrete through casting method.

Coremat® Xi 5 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Polymac® 5900 is a carboxyl-functional polyester resin designed for cure with TGIC in a 90:10 ratio. The resulting coatings exhibit excellent exterior durability, flow and mechanical properties, along with better hardness and solvent resistance than powder coatings based on a 93:7 system. By physical blending coatings based on polymac® 5900 and polymac® 5400, matte finishes can be achieved. Polymac® 5900 is TMA-free.

ENYDYNE® H 61104 TAPF - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through hand lay up and spray up method.

DISTITRON® 416 B1V12 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce buttons through centrifugal casting method.

NORSODYNE® O 13155 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used in hand lay up and spray up method.

Norsodyne® BR-235A - good workability, flexible type, for rods production. Main applications areas are leisure and clothing etc.

DISTITRON® 414 RV2,5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through mix with fillers and/or additives,casting.

Soric® SF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Dark Gray can be used for patching plastic models, fixtures, fixture modifications, changes, bridging and rework. Also, used by boat builders, auto body and furniture manufactures.

Nitoseal® PE290 three-component flexibilised polyester based sealant cures to form a tough resilient seal with a limited degree of movement. The material is self leveling and can be poured or gunned directly into horizontal slots. Nitoseal® PE290 will adhere to both concrete and asphalt surfaces that have been well prepared whether dry or damp.

DISTITRON® 414 CV3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through casting,injection molding,rtm method.

NORSODYNE® Y 61295 - Unsaturated polyester resin in styrene,DCPD. It is used to produce mastics,putties.

Norsodyne® 3110W - promoted and waxed. Main applications areas are building and construction, industrial sector etc.

Coremat® XM 4 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

ENYDYNE® R 61500 T - Unsaturated polyester resin in styrene,DCPD. It is used to produce pipes and tanks.

Stypol® 040-8084 - pre-promoted unsaturated polyester closed molding resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

DISTITRON® 3519 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

Polynt Group 10 - Dispersion of high quality pigments in a monomer-free reactive polyester grinding vehicle

Polydyne® 6043 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.

Soric® TF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Stypol® RSCA1500 - high performance, shrink controlled LRTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Stypol® 040-4954 is clear MACT compliant NPG isophthalic gel coats. They have been designed for use in the manufacturing of cultured marble, onyx, and granite.