Suppliers in Housewares

"Huzhou Huaman Chemical Industry Co., Ltd founded in 1995, specializing in the production of iron oxide pigments, products of iron oxide red, iron oxide yellow, iron oxide black, iron oxide orange, iron oxide brown, compound ferric green, iron oxide blue, etc. more than 50 species, widely used in paints, coatings, building materials, plastics, rubber, ink, ceramics, glass, paper, electronics, pharmaceuticals, magnetic materials and other industries. We have a strong technology and R & D capabilities, and with the close cooperation with research institutes and universities to continuously improve technology, to develop various new products, such as high dispersion, mobility, food-grade iron oxide pigments have been mass producted. The company has advanced equipment, scientific technology, perfect quality control system, excellent management and professional technical staffs, our product is constantly updated and improved. Quality of products has achieved the National Standards GB/T1863-2008, HG/T2250-1991, HG/T2249-1991 ,and to meet The International Standards ISO/1248-2006 required targets. Huaman’products sales throughout the world, about 80% are sold to Europe and the America also other regions, many of the world famous enterprises who business on pigments, architecture, ceramics, paints and other always trust in our products. Huzhou Huaman is located in Huanzhu Industrial Park, Huzhou City, Zhejiang Province, about 1 km south of center of Huzhou , about 3 km nouth of The China's third largest freshwater lake – Taihu Lake . 1 km away from Shanghai and Chongqing Expressway (G50) ,east Shanghai (about 130 km away from Hongqiao Airport, Pudong Airport, about 170 kilometers), south of Hangzhou (about 120 km away from Xiaoshan Airport), north Taihu Lake. Changchun-Shenzhen Expressway (G25), Hangzhou-Changchun Expressway, Shanghai-Jiangxing-Huzhou Expressway, 318,104 National Highway and other roads around our factory, water transport can through the Beijing-Hangzhou Grand Canal and the Changxing-Huzhou-Hangzhou water line, so the land and water transportation is very convenient. "

Since it first starting operating in 1980, resulting from the consolidated experience of Arrahona and later, NUDESA, NUDEC has strengthened its market positioning, year after year, thanks to the efforts of its employees. The quality and service the company offers have made us one of the most important manufacturers of plastic sheets in Europe, and our aim is to ensure that our clients continue to put their faith in us for many years to come. Our experience in manufacturing clear plastic sheets since 1963 has enabled us to become important specialists with great international prestige. For this purpose, we have extensive facilities and sophisticated extrusion lines that are constantly being adapted to the latest technological trends and the needs of our market. This aspect of corporate responsibility is expressed by NUDEC through its strategy, management and in its daily activities. NUDEC has implanted a comprehensive management policy, for the purpose of improving the quality of all its processes, preventing occupational risks and showing maximum respect for the environment.

Since 1976, fluorseals S.p.A. has specialized in the transformation of PTFE and melt processable fluoropolymers. Our brand of fluteck™ product lines includes standard semi-finished shapes, as well as special blends developed to customised requests. At fluorseals S.p.A., we pride ourselves on being a family-owned company with a clear belief in lasting relationships. Still serving some customers for over 40 years, we have a passion for problem solving and our continued investment in the latest technologies means we are able to meet most demands. Aside from our extensive capabilities in semi-finished products, our family of companies also excel in machined parts. Servicing a variety of sectors, we cover a broad scale, from large volume precision turning through to complex large milled parts. We offer up to simultaneous 5-axis machining and seal moulding capabilities up to 3 meters.

TPC, The Polyolefin Company (Singapore) Pte Ltd is the first major polyolefin manufacturer in Southeast Asia and has been in operations since February 1984. A plant expansion in 1997 and subsequent major modification to increase capacity in 2006 has enabled TPC to become one of the largest and most successful polyolefin producers in the region.

MyReplast Industries deals with selected types of plastic waste coming mainly from industrial post-consumption to make a final product capable of bridging the gap in quality between recycled and virgin plastic. The entire production process is managed by a plant, currently classified among the most advanced in Europe, located in the province of Brescia, in Lombardy. The plant is capable of generating around 40,000 tons of recycled polymers per year. MyReplast Industries is based on an economically sustainable business model, without resorting to public incentives. It produces high quality and environmentally friendly recycled polymers with the proprietary MyReplast ™ technology marketed by NextChem.

KMI Group Inc. is a premier producer and manufacturer of commodity resins and plastic compounds. We specialize in custom product lines that offer optimal raw materials for a variety of applications. Our products, technologies, and services are designed to maximize our customers' business needs and production. We strive to provide superior, cost-effective solutions to meet our customers' needs.

"Sortology is a business established to help the plastics, recycling and waste industries realise value from plastic by-product streams, both post-industrial and post-consumer. We do this by novel processing polymer mixtures and releasing the separated components for re-use in plastic manufacturing"

Possibilities, turning seawater into drinking water, reinforcing genetic analysis for medical breakthroughs, furthering the evolution of eco-cars, producing plant-based functional clothing, extending the shelf life of food for reduced waste, and creating a world where everyone can achieve their personal best.

Cardia Bioplastics is a global developer, manufacturer and marketer of sustainable resins derived from renewable resources. Our Biohybrid and compostable resins deliver packaging and plastics products with a lower carbon footprint.

"As KOKSAN AS, our company, which has been closely interested in the packaging sector since 1968 and has been involved in most of this process, started its journey in the packaging sector, which started with tin production, on its way to PET BOTTLE AND JAR, PET PREFORM, PE COVER, PET SHEET and PET RESIN raw material investments and It has continued on its way with its high-level management skills that it has realized on a yearly basis with its productions. KOKSAN AS has always set high quality principles as its target, together with the right purchasing and the right suppliers. Just like the packaging industry, KOKSAN AS continues to add value to its customers with the growth momentum of the industry it is in. Our company, which closely follows the technology; WAREHOUSE with a closed area of ​​6000 m2 on a total area of ​​300.000 m2, PET PREFORM in a closed area of ​​​​100.000 m2, INJECTION PE CAP on a closed area of ​​​​25.000 m2, PET BOTTLES AND JARs in a closed area of ​​​​10.000 m2, 10.000 m2 It is proud of being one of the leading companies in its region, one of the pioneers of the sector in which it operates, and the regional and national leader and largest of its business line, on a total closed area of ​​201.000 m2, with PET SHEET in a closed area of ​​50,000 square meters and PET RESIN facility of over 50,000 square meters. KÖKSAN AS shares this pride with its employees and their families, colleagues in the sector, colleagues, customers to whom it provides services and services, and suppliers from which it receives service and service, at all times and on every platform. As KOKSAN AS; PET PREFORM, PE INJECTION COVER, PET PLATE production as an innovation for WATER - GAS AND NON GAS BEVERAGES, FRUIT JUICE industries, PET PREFORM for producers of vegetable oil, tomato paste, pickles, vinegar, turnip, lemon juice, concentrated liquids for different types of food. , with its advanced technology and high production capacity, produces INJECTION PE CAP, PET BOTTLE, PET JAR and their matching caps as an approved supplier of many international food companies, holding international certificates. As KOKSAN AS, it has the rightful pride of having a special and distinctive place in the history of its customers, each of which has a value and a name, in the countries it operates in, and of being a part of this history in the business branches it has been in since 1968. While continuing our activities as Turkey's largest, pioneering and leading company in the business line we are in, it is proud of being one of the leading exporters of its sector and the leading exporter of the business line in which it operates."

Founded in 1973, Kafrit Industries (1993) Ltd strives to create better and optimized solutions for the Plastic Industry. Kafrit Masterbatches and Compounds technologies have always been designed with great care to support and empower our customer’s products. We promise to be an open and responsive to customer’s needs, providing the widest range of quality products and tailor- made solutions. We seek to make our product more sustainable and to positively impact in all aspects the communities where we work and live.

Engineering plastics and high-performance polymers are our core competence. High-quality products and services guarantee our customers efficient, comprehensive solutions from the development of a product idea through to the launch into mass production

GLOBAL POLYMERS PROVIDES SUSTAINABLE SOLUTIONS, CLOSED LOOP RECYCLING, AND CARBON FOOTPRINT REDUCTION. With 27 years of experience in plastics recycling, Global Polymers has the knowledge and expertise to help your company meet its goals in the area of social and environmental responsibility, carbon footprint reduction, and closed loop recycling.

Ercros is an industrial group with a long history of success in three distinct areas of activity: chlorine derivatives, intermediate chemicals, and pharmaceuticals. It holds a strong position in its main markets, exporting almost half of its products to more than 128 countries, mainly in the EU. Ercros is dedicated to safety, health, environmental protection, quality, and transparency to its stakeholders. Its voluntary commitment to these values ensures continued success.

"GRIFFIN the choice of the Pros Ease, speed and reliability are the key elements for the development of Griffon professional brand products. For over 75 years, Bolton Adhesives (formerly Bison International) with its Griffon products. offers all professionals a complete selection of quality solutions for all assembly, bonding, sealing and protection tasks and works. All products are developed for professional use, and therefore have various labels and certifications ensuring proper use. They are designed for maximum ease of use, to allow the professional to achieve a perfect end result to be proud of."

"Chemiplastica's history dates back to 1955 when we opened one plant, producing 5,000 tons, in Milan, Italy. Since then, our commitment to quality and our singular vision have driven us to become the Global Leader in the amino sector of the thermoset industry, producing more than 75,000 tons annually."

"Founded in the late 70s, LAMPLAST is now among the European leading thermoplastic and rubber compounders, with a volume exceeding 30.000 ton and a turnover of about 21 millions Euro (2000). According to a market research performed by AMI Consulting in 1999, LAMPLAST is the biggest independent (not integrated) supplier of PP based compounds to the European automotive industry, with a market share of about 3%.The plant and the headquarters are located in Giussano - a 20.000 inhabitants town near Milan - and cover an area of approximately 60.000 m2. Being located in a protected area (the Lambro river natural park), the facility fulfils the most restricting laws in terms of environmental protection. LAMPLAST plans to gain the ISO 14001 environmental certification within the next two years. The actual capacity, about 40.000 ton/year, will raise to 60.000 ton/year, thanks to the machinery investments planned for years 2001 and 2002."

SCGTPE is a professional Thermoplastic Elastomer (TPE) manufacturer which produces various grades and series of SOULEFLEX® TPE that meets customers' requirement. We use state-of-the-art production facilities and testing equipment in the production of our TPE.The finished products pass through stringent quality control from the receiving of incoming raw materials till the outgoing of the finished products. We market our high quality value-added products worldwide through continuous research and development that uses environmental friendly approach and focuses in conforming on various international standards. SOULEFLEX®is suitable to be used in various applications including interior and exterior automotive parts, electrical and electronic products, consumer and care articles, hand and power tools, sport and leisure products, medical equipment, and etc. SCGTPE is certified according to ISO9001:2015. With conscientious manner andour expertise, we continuously improve the quality of our products in the hope of creating and maintaining best quality products and excellent brand image. We uphold the following quality policy and philosophy of "Customers' Priority, Quality Excellent" and "Together We Innovate and Prosper" hand in hand with our business partners.

Saudi Polymers Company is located in Jubail, Saudi Arabia and manufactures polyethylene, polypropylene, polystyrene, and 1-Hexene products distributed by Gulf Polymers Distribution Company FZCO. Saudi Polymers Company is a limited liability company incorporated in the Kingdom of Saudi Arabia and jointly owned by National Petrochemical Company (Petrochem), a joint stock company incorporated in the Kingdom of Saudi Arabia, and Arabian Chevron Phillips Petrochemical Company Limited, a wholly-owned subsidiary of Chevron Phillips Chemical Company LLC.

"Epoxyset is a leading formulator and manufacturer of advanced epoxy, urethane, UV curable, and silicone systems. Since 1997, we have focused on meeting demanding applications through continued innovation and ultimately providing customers with quality products. Our adhesives, potting compounds, coatings, and thermal greases are used extensively in the electronics, medical, and optical industries. We have a complete line of product offerings specially designed for a variety of applications however custom formulations is our specialty. Our experienced chemists work towards a solution in a timely manner and work iteratively with the customer to deliver a high-performance product. As an ISO 9001:2015 certified company, we relentlessly endeavor to create a safe and efficient workplace and produce the highest quality products. Our commitment to quality and innovation is at the forefront of our company and leads us into a dynamic world of manufacturing."

"QCR Solutions’ solvent soluble Near Infrared Dyes and Laser Absorbing Dyes are available in a wide spectral range. We have a large library of standard NIR absorbing dyes ranging from narrow notch to broad band absorbers that can attenuate selective near infrared wavelength regions. These NIR dyes can be used singly or in combinations to create custom spectral filters for multiple applications. Our Near Infrared (NIR) Dyes can be incorporated into coatings, inks, solutions and plastics. These NIR absorbing dyes can be used for Laser Protection Eyewear, Light Filters (narrow or broad band), Welding Protective Eyewear, Security Inks, Graphics and many more applications. "

Regal Petrochemical Company (RPC) is currently owner of a plant located in the petrochemical special zone of Bandar-e-Imam Khomeyni, south west of Iran; The plant will be capable of producing 150,000 tons per year Polypropylene from liquid Propylene. The Novolen Technology has been suited for production of Polypropylene (Homo-Random-Impact & Ter Polymers of different grades) , the Licence & Basic Engineering are done by ABB LUMMUS and the detail engineering of the project has been accomplished by an Iranian Engineering Company internally affiliated with Regal.

"The business's history stretches all the way back to the mid-1960s. Since 2014 we are part of the AnVa Group under the name of AnVa Polytech. We are a qualified partner within development and manufacturing of rubber, TPE and silicone products. With high level of competence all the way from idea to delivery of services or pfinal products. In oour material lab we have the possibility to develop customer unique materials, based on customers specifications. As we manufacture all the rubber we use in our own mixing department we have a flexibility that are hard to find elsewhere. Requests for materials or products made of materials we currently don´t have, we can develop a customized material in our lab and produce it with all specifications met. Our mixing unit is located in our Sunne facility."

Petkim, one of the most popular corporations in our country, is indispensable raw-material producer of the industry with its product range of more than 50 products. Its petrochemical products are important input of construction, electricity, electronic, packaging, textile also medical, dying, detergent and cosmetic sectors. Petkim maintain to add value to our national economy and happen to source of pride by respecting people and environment-friendly production technology on the other hand contributing to our cultural, social, economic life besides performing 3,2 million tons of gross production annually.

Arkema is a leading specialty chemicals and advanced materials company headquartered in Colombes, near Paris, France.Created in 2004 when French oil major Total restructured its chemicals business, Arkema was introduced at the Paris stock exchange in May 2006. With a turnover of 7.7 billion €, Arkema has 19,000 employees in more than 50 countries, 13 research centers worldwide, and a total of 137 production plants in Europe, North America and Asia.Arkema is organized into three business segments: Coating Solutions, Industrial Chemicals and Performance Products.

Indorama Eleme Petrochemical Limited (IEPL), located in Port Harcourt, Rivers State, Nigeria, a Group Company of Indorama Corporation, is a Poly-Olefins producer of a range of Polyethylene and Polypropylene products. IEPL was a 100% subsidiary of Nigerian Government owned Nigerian National Petroleum Corporation (NNPC) with the name Eleme Petrochemicals Company Limited (EPCL). When the erstwhile EPCL was privatized, under the Privatization Program, the Indorama Corporation emerged as the core investor and acquired the Unit in August 2006. Since then, IEPL has recorded several achievements of smooth & stable operations, enhanced production capacities, winning of several global awards & certifications and has become a successful model of the Nigeria's Privatization Program.

"We have always been more concerned with the future than with a quick one-time profit. We have several divisions throughout the country, but all are united by the idea of ​​sustainability. We protect the environment. We cover the plastic recycling process from start to finish… and to the next start. We put on honesty and age-old relationships. There is confidence in our word. We always pay and deliver on the agreed dates. You save with us for a long time. Our divisions are each other's customers. We know that the investment in our products and services will pay off."

"We specialize in producing highly fibrillated macro (MaFC) micro (MFC) and nano (NFC) cellulose fibers, either as separate entities or in controlled mixtures. Zelfo Technology’s experience in these fields extends to sources from pre-processed and non-processed ligno-cellulosic fibers and we aim to generate the best performance properties from all constituent parts of the source material. ​ Engineered fibers perform as biobased binders, composites and absorbents etc. "

We are a global leader in sheet extrusion of Polycarbonate, Acrylic, SAN, Polystyrene, HIPS & MS Sheets. A driving force in GCC since 2001, we cater to the complete requirements of customers across Europe, Asia Pacific, Africa and the Middle East. We have evolved new ideas to meet the changing needs of the industry and offer quality solutions to our respected clients. Our strategy is aligned to stay ahead of the market with innovation and meeting the needs of our customers.

"FlexForm Technologies began operations in 1999 from its 55,000 square foot facility in Elkhart, Indiana. FlexForm Technologies manufactures non-woven natural fiber composite mats and panel products that are strong, lightweight, moldable, and completely recyclable. These revolutionary composite materials serve the needs of many industries including automotive, office interiors, aircraft, recreational vehicles, truck, commercial vehicles, industrial, modular housing and packaging. More information on these products can be found here. In 2008 FlexForm Technologies expanded its operation to accommodate its state of the art office panel system manufacturing line. This non-woven product made primarily from sustainable and recycled materials meets the highest standards in the office systems industry. "

"Bayport Polymers LLC (Baystar) was created as a joint venture in 2018 between three established petrochemical industry leaders, Total S.A. (Total), Borealis Holdings LLC and NOVA Chemicals. Our Baystar joint venture investment is building a 625,000-ton-per-year polyethylene unit at our production site in Pasadena, Texas. The new Bay 3 unit will use Borstar® technology and more than double our site’s polyethylene capacity to 1.1 Mt/y with a start-up scheduled in 2021. The contract for the engineering, procurement and construction of the new unit has been awarded to McDermott and is expected to employ 1,750 staff during peak activity. Baystar is also currently building a one-million-tonne per year steam cracker in Port Arthur, Texas. This cracker will process ethane, which is abundantly available and competitively priced in the U.S. and will supply our Baystar polyethylene units."

EXTRUSION, CALENDERING, AND PRESS LAMINATION ALL UNDER ONE ROOF This combination of processes gives our sheet materials the unique design and forming characteristics that enable us to offer solutions that meet the exact requirements of diverse industries and applications including: aerospace, mass transportation, general thermoforming, corrosion resistance and wall protection. Our manufacturing facility produces calendered, extruded and press laminated rigid film and sheet from 6 mm to 4 inches thick, in standard and custom dimensions, colors and compounds. Currently in operation at our Newcomerstown, OH plant is 1 calender line, 4 extrusion lines and 3 laminating presses in nearly 200,000 square feet of manufacturing and office space.

"At Chem-Trend, we are not simply a supplier. We are a visionary, working alongside you to create solutions that help you today, while forging the way to the future. It starts with our people, who begin each day focused on your business, your challenge, and your success. It starts with you: your goals, your challenges, your possibilities. Through collaboration and innovation, we use a combination of industry-leading products and custom solutions to give you a competitive advantage immediately, all while providing a sustainable and successful path forward. Helping customers in nearly every sector of manufacturing, we have built a remarkable presence throughout the world. This provides local support and development close to home, while allowing for deployment to local manufacturing sites."