Brands in Electrical & Electronics

PEEK, a linear, semi–crystalline aromatic polymer, is considered one of the highest performing thermoplastic materials; it can withstand extreme temperatures, high pressure and caustic fluids. Now, Zeus has taken PEEK to an entirely new level of performance with PEEKshrink™. PEEKshrink™ provides a shrink-to-fit layer of protection for sensitive components and critical connections. PEEKshrink™ is an ideally suited product for challenging environments such as oil and gas exploration where abrasion, intense pressure, chemicals, water, or dielectric interference pose a threat to wires and electrical components. PEEKshrink™ is an obvious and optimal splicing aid for PEEK insulated wire. PEEKshrink™ is an alternative to traditional fluoropolymer protective coatings with its very wide working temperature range.

High-purity silicone adhesives offer efficiencies in manufacturing by maximizing throughput. From biocompatible adhesives to high-temperature space-grade adhesives, NuSil® high-performance silicones from Avantor® are formulated to provide the strongest bond for a wide range of substrates in the most demanding environments.

GENIOSIL® XT grades expand the formulation capabilities with silane-terminated polymers. These new grades have been optimized to be low in viscosity but displaying a high number of silyl groups per unit volume. Consequently, the new polymers build up a solid, yet elastic network as they cure. The resulting adhesive layers and waterproofing membranes based on GENIOSIL® XT attain high inner strength, remain extremely elastic and exhibit outstanding tear resistance. Thus they are the products of choice for industrial applications.

ESPOLEX® TPE Series is distinguished by offering many low-density grades that can provide substantial weight and cost savings over higher-density thermoplastic elastomers.

Boron Nitride NanoBarbs™ are boron nitride nanotubes that have nano-crystals of h-BN nucleated on the outside surface of the nanotube. The BNNano process produces high-purity and high-quality Boron Nitride NanoBarbs™ at a low cost that are free of common and metallic contaminants. The NanoBarb™ simplifies the handling and processing of nanomaterials by reducing the Van der Waals Attraction (minimizing contact area between particles), enabling higher loadings when mixed into other materials without agglomeration.

Excelene grades are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

Navajo Brand® pumice products are available in particle size distributions ranging from 6-mesh to 5 microns. Their high brightness, purity, and low specific gravity offer formulators unique opportunities for superior performance.

Huber’s MoldX® Optimized Alumina Trihydrate (ATH) products eliminate halogens and reduce resin consumption. All MoldX products allow for higher loadings while offering the latest in low viscosity technology thus providing increased flame retardant efficiency at lower formulation costs.

IR Blocker 40 Plus™ family of coatings enables Outdoor Displays to run cooler while enhancing viewability in bright ambient environments.These coating are fully temperable making them an excellent choice for exterior surfaces.

Penetrating Oil SL-10™ is a penetrating oil and heavy-duty spray lubricant that contains Muscle Metal Treatment MT-10® technology and Power-Lift Grease PL-10™ lubrication. SL-10™ quickly penetrates into hard-to-reach areas to loosen seized and corroded, nuts, bolts and other metal mechanisms. SL-10™ also provides long-lasting protection from rust and corrosion. It is a heavy-duty penetrating oil and spray lubricant designed to quickly penetrate into hard-to-reach areas to loosen seized and corroded nuts and bolts and provide long-lasting lubrication.

FIRESEAL 814 is an ASTM E-814 rated one part water based acrylic intumescent sealant formulated to seal gaps in construction and through penetrations against the passage of fire, smoke and gasses. Fireseal is suitable for copper and steel pipes, steel conduits, electrical cables, data and telephone cables, PVC and CPVC pipes (up to 2” diameter), and HVAC ductwork.

APCO Coatings brand consists of a broad range of products including cost effective alkyd enamels and primers, highly chemical resistant tank linings, high performance acrylic polyurethanes, 100% solids epoxies and polyurea. The understanding of all aspects of the coating job, from surface prep, application equipment and service environments ensures APCO coatings are engineered to stand the test of time. Key raw materials such as resins and curing agents are sourced only from industry leading suppliers and are all domestically produced. Rigid quality control standards ensure consistency batch after batch.

PPG HI-SIL® synthetic amorphous precipitated silica products are among the industry’s most trusted and proven products.

jER™ is an epoxy resin brand with the longest history in Japan. Based on decades of research and accumulated technology, we are offering a wide range of epoxy resin grades with characteristic properties, such as low chlorine, low viscosity, transparency, flexibility, photo-curability, high molecular weight type, and specialized molecular structure type, to meet diverse needs of our customers.   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

When Thomas Edison founded General Electric, he insisted the company have the highest capability in fundamental material research. For over sixty years, Glyptal generated the robust, protective coatings necessitated by G.E. The company would look to Glyptal to formulate and manufacture its specialty needs when no existing product satisfied the requirements. We always got the tough ones.

G-TEX M is our range of 100% recycled carbon fiber nonwoven mats. These mats provide an excellent balance of mechanical properties, formability and high-quality surface finish. G-TEX M nonwoven mats can be used with all commonly used resin systems for composites. Whilst best suited for compression molding processes in either dry or pre-impregnated forms, they are also used today in vacuum infusion (dry mats) and autoclave (pre-impregnated mats) processes. G-TEX M nonwoven mats are used today in automotive, wind energy, marine and tooling applications.

Under the brand family GENIOSIL®, WACKER offers organofunctional silanes and innovative silane modified polymers for bonding and sealing. Their most outstanding property is the fact that they combine environmental advantages with performance benefits.

White Ice series are silicone based thermal greases engineered with special binding agents to reduce bleed and oil separation. These compounds offers excellent wetting properties, spreadability and the low viscosity formulation makes them easy to apply to thin bond line thickness for minimum thermal resistance. Timtronics silicone compounds offer superior conductivity, low thermal resistance and long term stability.

GLYSANTIN® line of products are engine coolant concentrates based on ethylene glycol for water cooled engines.

Polycarbonate is a transparent material and belongs to the group of amorphous engineering plastics as well as to the polyester family of plastics. It has a high stiffness and extremely high impact strength. It also has a high glass transition temperature and heat deflection temperature (approx. +130 °C). The continuous operating temperature of PC ranges between approximately -60 °C and +120 °C. The material is highly resistant to high-energy radiation. However, it must be stabilized against UV rays, otherwise yellowing may occur. Like all polyesters, PC is not resistant to hot water (from approx. +60 °C) in the long term.