Products in Devices & Assemblies: Chemical Resistant

MOCOM Compounds ALFATER® XL A85I 4PA0010 is a black thermoplastic vulcanisate (PP+EPDM) that has been adhesion-modified to polyamide. It offers easy flow, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. Additionally, it has a service temperature range of -40-125°C. ALFATER® XL A85I 4PA0010 is suitable for use in the automotive, building and construction, electrical and electronic, machinery, furniture, and injection molded parts markets, with typical applications including seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, functional components, casters, and 2K components.

MOCOM Compounds ALFATER® XL D40I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) that is used in injection molding and is available in natural color and black. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery and furniture applications, and can be used for seals, sealing lips, handles, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners, and connectors, and 2K components. It can adhere to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A70I 3EFSL0000 is a thermoplastic vulcanisate (PP+EPDM) polymer suitable for injection molding. It has improved abrasion resistance, slip-optimized, easy flow, high surface quality, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, sport and leisure, and furniture applications and can be used for injection molded parts such as seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, bearings and sliding elements, thin walled parts, profile, cable ducts, 2K components, and casters. It has good adhesion to various polymers and has a service temperature range of -40-125°C. The polymer should be stored dry, protected from light, at a temperature not exceeding 30°C, and tightly sealed.

MOCOM Compounds ALFATER® XL A50I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) with natural color and bright inherent color. It has low emissions, good colorability, easy flow, excellent weathering resistance, excellent chemical resistance, excellent ozone resistance, excellent hot air resistance, and excellent hydrolysis resistance. It is suitable for injection molding and can be used for a wide range of applications, such as seals, sealing lips, handles, racking/shelving, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, and 2K components. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXMP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 12N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE C88AXMP-HT is a high-performance melt-processable copolymer of tetrafluoroethylene and ethylene that is designed for use in automotive applications. It offers improved thermal stability and performs better at higher temperatures than standard ETFE, with a maximum operating temperature of 200ºC. Its enhanced stress crack resistance, abrasion resistance, and mechanical strength make it suitable for ultra-thin layer insulation in vehicles and aircraft where reducing carbon footprint and increasing fuel efficiency is important.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon+™ Non-Conductive LM-ETFE AH-600 is a compound designed for use in automotive fuel hose. This product is ideal for hose constructions which require chemical resistance, permeation resistance, and an unsurpassed bond to polyamide materials. These products are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter x 0.125 inches long. It offers a lower melting compound that results in a wider process window and better compatibility with some polyamide nylons for co-extrusion.

AGC Chemicals Americas, Inc. Fluon+™ ETFE AH-700C is a compound designed for use in automotive fuel hoses. This functionalized polymer is ideal for hose constructions that require chemical resistance, permeation resistance, and unsurpassed protection against static buildup. AH-700C balances performance and economics. It is supplied in cylindrical pellet form, with pellets measuring approximately 0.080 inches in diameter and 0.125 inches in length.

AGC Chemicals Americas, Inc. Fluon+™ LM-ETFE AH-600C is a compound designed for use in automotive fuel hose. This product is ideal for hose constructions which require chemical resistance, permeation resistance, and unsurpassed protection against static build-up. AH-600C offers a lower melting compound that results in a wider process window and better compatibility with some polyamide nylons for co-extrusion. These products are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter x 0.125 inches long.

AGC Chemicals Americas, Inc. Fluon+™ Non-Conductive ETFE AH-800 is a compound designed for use in automotive fuel hose. This product is ideal for hose constructions which require chemical resistance, permeation resistance, and an unsurpassed bond to polyamide materials. AH-800 has a higher upper-end temperature rating (approaching 200°C) and improved resistance to stress cracks at elevated temperatures. These products are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter x 0.125 inches long.

AGC Chemicals Americas, Inc. Fluon+™ Non-Conductive ETFE AH-700 is a compound designed for use in automotive fuel hose. This product is ideal for hose constructions which require chemical resistance, permeation resistance, and an unsurpassed bond to polyamide materials. Non-Conductive AH-700 balances performance and economics. These products are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter x 0.125 inches long.

AGC Chemicals Americas, Inc. Fluon+™ ETFE AH-800C is a compound designed for use in automotive fuel hose. This product is ideal for hose constructions which require chemical resistance, permeation resistance, and unsurpassed protection against static build-up. AH-800C has a higher upper-end temperature rating (approaching 200°C) and improved resistance to stress cracks at elevated temperatures. These products are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter x 0.125 inches long.

Nanoxo Quantsil is an innovative quantum dots containing silicone-based clear and transparent elastomer possessing luminescent and UV filter properties. Quantsil is supplied as a two-part set i.e., the base elastomer (component A) and the curing agent (component B).

Vamp Tech Vampamid™ HT 4026 V0 40% glass fiber reiforced, low water absorption, good mechanicals properties, good electrical features, high chemical resistance and excellent operating temperature, UL 94 V0 at 0.8 mm, GWFI 960/1-2

VMQ 50 B 3 M1 Silicone rubber is a high-performance elastomer that is ideal for high and low-temperature applications. Silicone Rubber’s unique structure provides material flexibility, and it is consistent over a wide range of temperatures thanks to its chemical characteristics.The unique structure of silicones provides material flexibility which is consistent over a wide range of temperaturesMain advantages of silicone rubber are its combined chemical and heat resistanceSilicones offer a typical working temperature ranging from -60°C up to +250°CThe electrical properties of silicone are excellentIts resistance to weathering and ozone attack is outstanding

ECP 9603 Conductive PC/PBT Carbon Nanotube Injection Molding Compound. ECP 9603 is a proprietary injection molding compound utilizing multi-wall carbon nanotube technology to give a permanently anti-static, conductive material. Special compounding techniques at low filler loadings ensure the retention of physical properties and excellent cleanliness.

Nanoxo Quantsil is an innovative quantum dots containing silicone-based clear and transparent elastomer possessing luminescent and UV filter properties. Quantsil is supplied as a two-part set i.e., the base elastomer (component A) and the curing agent (component B).

VMQ 60 B 3 M1 Silicone rubber is a high-performance elastomer that is ideal for high and low-temperature applications.The unique structure of silicones provides material flexibility which is consistent over a wide range of temperaturesMain advantages of silicone rubber are its combined chemical and heat resistanceSilicones offer a typical working temperature ranging from -60°C up to +250°CThe electrical properties of silicone are excellentIts resistance to weathering and ozone attack is outstanding

VMQ 75 B 3 M Silicone rubber is a high-performance elastomer that is ideal for high and low-temperature applications.The unique structure of silicones provides material flexibility which is consistent over a wide range of temperaturesMain advantages of silicone rubber are its combined chemical and heat resistanceSilicones offer a typical working temperature ranging from -60°C up to +250°CThe electrical properties of silicone are excellentIts resistance to weathering and ozone attack is outstanding

Vamp Tech Vampamid™ HT3 3028 V0 is 30% glass fiber reinforced, halogen free, low water absorption, good mechanicals properties, good electrical features, high chemical resistance and excellent operating temperature, UL 94 V0 at 0.8 mm, GWFI 960/1-2 GWIT 775/1-2.

60 durometer black Viton B fluoroelastomer compound

Tecomid® NB40 GR30 NL100 by Eurotec Engineering Plastics is comprised of Polyamide 6. It is commonly used

The StanoStat CP range of antimony tin oxides (ATO) combine semi-conductive properties with a very light gray colouration. Compared to other ATO grades, where the blue shade is dominant, the StanoStat CP grades offer great variation in the coloring of the finished product.

Tecomid® NB40 NL E by Eurotec Engineering Plastics is comprised of Polyamide 6. It is commonly used

Neoflon ETFE EP-620, in pellet and solid forms, shares features such as excellent flexibility, good electrical properties, and a low melting point. Targeting markets in automotive, consumer goods, electrical and electronics, and printing and packaging, it finds applications in aerospace, appliances, automotive electronics, and wire and cable insulation. With processing methods covering extrusion and injection molding, it offers versatility in various end uses.

55 Durometer Black Viton A Fluoroelastomer Compound