Brands in Other Electrical & Electronics Applications

Wevopur products are known for their highly configurable reactivity and flow characteristics. Their adhesive properties ensure reliable bonding and sustained protection of electronic components against aggressive ambient conditions. Thermal stability at continuous operating temperatures up to 165 °C expands the deployment range, even in demanding applications. Flame-retardant properties in accordance with UL 94 V-0 can also be achieved, even with thin layers.The filling characteristics of the resin components increase thermal conductivity, enabling designers to achieve optimal thermal management. Wevopur is also mechanically versatile with properties ranging from gel-like to elastomeric and impact-resistant to high dimensional stability. Clear, UV-stable systems are also available for transparent applications.

Various innoprene products supplied by Kumho Polychem Co.,Ltd. are thermoplastic elastomers of polyolefin type, and they can replace the existing thermosetting products of EP(D)M or CR rubber. The material is also able to replace soft PVC that is recently being discussed for its environmental problems. Moreover, the material is of low weight, therefore it is possible to develop light-weighted products. Innoprene is a product that is already completely cross-linked and there is no need for an extra cross-link process before its ultimate use. Also, it is possible to simplify the processes and reduce the prime cost as it is an environment-friendly material allowing for an easy recycle of scraps resulted from processing. Innoprene is possible to mold using devices of extrusion molding, injection molding, blow molding and calendar processing as in normal plastic resin. Especially, it is among the new materials that are possible to apply in extrusion area. (automobile glass run channel and construction window gasket etc)

Microcoat® coatings are specifically developed, chemically pure proprietary blends providing proper density, adherence and low Porosity characteristics required for dry-etching and ion implanting.

Dynalene develops, manufactures and distributes industrial heat transfer fluids and coolants such as glycols, which include propylene glycol, ethylene glycol, BioGlycol, solar glycol, Geoglycol as well as other fluids including potassium formate, calcium chloride, hydrocarbon and silicone chemistries.

Bestdur® is Triesa's registered trademark for polybutene terephthalate (PBT). PBT is a technical plastic that is characterized by having excellent hardness, excellent dimensional stability, excellent friction resistance, good electrical resistance, excellent coloration and also many degrees of fire resistance (V-0)

Versilube® products include premium quality, silicone-based greases, lubricants and compounds with unique physical properties and performance characteristics that are formulated for critical lubrication applications and hostile environments. These silicone-based products provide longer service life than most other materials.

Polyimide (PI) are a class of high performing polymers recognized for their outstanding mechanical, thermal, and chemical properties. Polyimides typically exhibit consistent properties through high and low temperatures and possess very good dielectric traits. These thermally stable polymers are biocompatible for use within the body and are sterilizable by several methods. Polyimides are also very resistant to abrasion and have very good wear characteristics. Polyimide can be applied as a coating for over-the-wire (OTW; PI insulated wire) applications for both medical and non-medical uses. Polyimide provides a low friction surface for ease of pushability (deployment) of PI insulated lead wires and can be applied in extremely thin coatings. PI Glide™, a PI / PTFE composite, is an alternative for applications that require a more lubricious surface but do not require the performance of pure PTFE. PI and PI Glide™ coated wire are also available in a layered or composite construction allowing further customization of properties.

Rexolite is high voltage and high performance plastic. Rexolite® is a unique cross-linked polystyrene, microwave plastic manufactured by C-Lec Plastics Inc. This material’s most notable properties are it’s stable electrical properties into the Giga-hertz frequency range. It is also optically clear, with a slight yellow cast, when polished (approximately the same as Acrylic), dimensionally stable, and has excellent sound transmission characteristics. As a result, Rexolite® is often used for high-frequency circuit substrates, microwave components, and lenses with acoustic, optical and radio-frequency applications.

Hernon Anaerobic Structural Adhesives (HASA) are characterized by toughness and durability. HASAs have high impact resistance, excellent peel strength, quick cure times and remain a liquid on mating surfaces until assembly. The exclusion of oxygen starts the anaerobic curing process.

Navajo Brand® pumice products are available in particle size distributions ranging from 6-mesh to 5 microns. Their high brightness, purity, and low specific gravity offer formulators unique opportunities for superior performance.

Petro Rabigh produces 75 KTA of EPR made by the polymerization of ethylene, propylene and ethylidene norbornene (ENB) used as a third monomer.EPR is widely applied to sealing products (O-ring, packing) electrical equipment and automotive part

The Solfre brand consists of a range of specially formulated polyurethane adhesives ideal for panel bonding. Our Solfre range is divided into two main areas

PEEK, a linear, semi–crystalline aromatic polymer, is considered one of the highest performing thermoplastic materials; it can withstand extreme temperatures, high pressure and caustic fluids. Now, Zeus has taken PEEK to an entirely new level of performance with PEEKshrink™. PEEKshrink™ provides a shrink-to-fit layer of protection for sensitive components and critical connections. PEEKshrink™ is an ideally suited product for challenging environments such as oil and gas exploration where abrasion, intense pressure, chemicals, water, or dielectric interference pose a threat to wires and electrical components. PEEKshrink™ is an obvious and optimal splicing aid for PEEK insulated wire. PEEKshrink™ is an alternative to traditional fluoropolymer protective coatings with its very wide working temperature range.

UNIFOAM® is a chemically cross-linked closed cell batch foam with a superior superfine cell structure across all standard grades.