Products in Jacketing & Insulation

Securoc® 014 is composed of 50 - 70% huntite, 30- 50% hydromadnesite, and less than 1% quartz. It is a white solid that decomposes at more than 250°C and has a pH of 10. This non-oxidizing product has various commercial and industrial uses.

Nicron® 660 is an off-white, platy, high-purity, very fine talc, which is primarily used in paints and coatings. Nicron® 660 has excellent flatting characteristics, superior anti-settling properties, and is the product of choice in gel-coats. Nicron® 660 is used in rubber, wire, cable, and plastic applications.

Securoc® C10 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

JetFil® M500c is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® T590 is an off-white, extremely platy, fine talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® P150 COR is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® T290 is an off-white, extremely platy talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastic applications, including wood-plastic composites. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® T-FDC is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® 750C is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® P500 is an off-white, high-purity, extremely platy, fine talc. It is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® 3CC is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® P200 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P200 could also help in achieving good long-term thermal stability (heat aging).

JetFil® 575P-575C is an off-white, high-purity, extremely platy, fine talc. It is recommended for excellent stiffness, HDT, and dimensional stability in high-performance plastics, plastic films, and wire and cable applications. It is available in compacted form (JetFil® 575C) for maximum extruder throughput, minimum dust, and improved dispersion.

Portaflame® SG 40 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

SNOBRITE® SP is a white extender pigment that is produced from air-floated intermediate kaolins. With a plate-like crystal structure and high aspect ratio, SNOBRITE® provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. Its tendency to slowly build viscosity makes SNOBRITE® a cost-effective formulating tool to enhance performance without adversely affecting production rates. Its additions also improve critical working properties, including extrusion, calendaring, mold release, and handling.

Portaflame® SG 25 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

SNOBRITE® 75HB is a white extender pigment that is produced from air-floated intermediate kaolins. With a plate-like crystal structure and high aspect ratio, SNOBRITE® provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. Its tendency to slowly build viscosity makes SNOBRITE® a cost-effective formulating tool to enhance performance without adversely affecting production rates. Its additions also improve critical working properties, including extrusion, calendaring, mold release, and handling.

SNOBRITE® 75 is a white extender pigment that is produced from air-floated intermediate kaolins. With a plate-like crystal structure and high aspect ratio, SNOBRITE® provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. Its tendency to slowly build viscosity makes SNOBRITE® a cost-effective formulating tool to enhance performance without adversely affecting production rates. Its additions also improve critical working properties, including extrusion, calendaring, mold release, and handling.

SNOBRITE® 68 is a white extender pigment that is produced from air-floated intermediate kaolins. With a plate-like crystal structure and high aspect ratio, SNOBRITE® provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. Its tendency to slowly build viscosity makes SNOBRITE® a cost-effective formulating tool to enhance performance without adversely affecting production rates. Its additions also improve critical working properties, including extrusion, calendaring, mold release, and handling.

SNOBRITE® 60 is a white extender pigment that is produced from air-floated intermediate kaolins. With a plate-like crystal structure and high aspect ratio, SNOBRITE® provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. Its tendency to slowly build viscosity makes SNOBRITE® a cost-effective formulating tool to enhance performance without adversely affecting production rates. Its additions also improve critical working properties, including extrusion, calendaring, mold release, and handling.

Portaflame® SG 20 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 35 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

CONSTAB CONSLIP® 205 HD is a permanent slip agent designed for use in the inner layers of cable ducts. It's suitable for polyethylene (PE) and resin-based materials and finds applications in the building and construction and electrical and electronics markets, particularly for pipes and plumbing and jacketing and insulation, including cables and pipes.

St. Louis Group Antimony Metal is a versatile ingot form of antimony, serving a range of vital roles. This metal finds its significance in applications such as batteries manufacturing and soldering flux, contributing to the creation of cables and supporting electrical and electronics markets. As an essential component in technical salts and inorganics, it embodies the prowess of antimony compounds. Antimony Metal is available in 4 grades: G1,G2,G3,G4.

Laripur® 8860EG is a PTMG polyether based TPU exhibiting a very good resistance to hydrolysis and microbes attack. The standard version is used for the injection of technical items while the EG one is indicated for the extrusion of hose, cable, profile and film. The latter is available also UV stabilized as EUV.

Laripur® 9060EG is a PTMG polyether based TPU exhibiting a very good resistance to hydrolysis and microbes attack. The standard version is designed e.g. for injection molding of tags and technical items, while EG one for the extrusion of cable, profile and film.

Laripur® 9060HFM is a PTMG ether based TPU exhibiting an excellent flame retardant still maintaining good mechanical properties. It exhibits a matt surface and it is completely halogen free. It is consequently recommended for the production of high performance flame retarded items and extrusion of cables especially.

Laripur® 4760EG is a polytetramethylene glycol (PTMG) polyether-based thermoplastic polyurethane (TPU) known for its excellent resistance to hydrolysis and microbial attack. The standard version of this TPU is specifically formulated for injection molding applications, making it well-suited for the production of technical items. Additionally, there is another version tailored for extrusion processes, allowing for the manufacturing of hoses, cables, profiles, and films. The outstanding resistance to hydrolysis and microbes enhances the durability and reliability of products manufactured with Laripur® 4760EG.

Laripur® 5260EG is a high-quality PTMG polyether-based thermoplastic polyurethane (TPU) known for its excellent resistance to hydrolysis and microbial attack. The standard version is specifically designed for injection molding applications such as ski boots and technical items. Additionally, there is another version tailored for extrusion processes, including hoses, cables, profiles, and films.

Laripur® 7560EG is a PTMG polyether based TPU exhibiting a very good resistance to hydrolysis and microbes attack. The standard version is indicated e.g. for the production of seal and technical items while the EG one is proposed for the extrusion of hoses, cables, profiles and film.

Laripur® 9060EF is a TPU (Thermoplastic Polyurethane) based on PTMG polyether known for its excellent flame-retardant properties. This transparent and halogen-free product is recommended for the production of fire-retardant items and cable extrusion, especially. Its flame-resistant properties make it a suitable choice for applications that require fire protection and safety measures.

Z-NOX® TBM6 is an antioxidant designed for Plastics & Elastomers applications. This essential additive, belonging to the chemical family of phenols, effectively counteracts oxidation processes. Z-NOX® TBM6 comes in a powdered physical form, making it suitable for use in multiple applications, including wires and cables. It enhances the material quality, stability, and performance of plastics and elastomers in the electrical and electronics industry, as well as other industrial uses.

Z-NOX® 1076 is an antioxidant mainly utilized in the electrical and electronics market segment, particularly for wire and cable applications like jacketing and insulation. It falls under both polymer additives and elastomer additives categories, functioning as an antioxidant. This product is compatible with various polymers and resins including acrylics, ABS, polycarbonates, polyethylenes, polyoxymethylene, polypropylenes, polyurethanes, PVC, and polystyrenes.

Z-LITE® 62 is an efficient hindered amine light stabilizer, holds significance in PVC and PVB applications. Its appearance can vary between white or yellow powder or granules. With attributes like low volatility and a low melting range, it excels in agricultural films, wire, and cable applications. It's also compatible with pigment systems and those using carbon black.

MagFlam® MDH-2 is a cutting-edge flame retardant solution featuring Magnesium Hydroxide. With its high purity grade, this powder ensures exceptional fire resistance. MagFlam® MDH-2 shines as a reliable choice for enhancing safety in various applications, including chemicals production and wire & cable industries. As a flame retardant, it excels in both industrial manufacturing and electrical sectors, particularly for wire & cable jacketing and insulation.

SmokeShield® ZB8 is a versatile additive catering to the flame retardant needs of plastics and elastomers. With its dual functionality as both a flame retardant and a smoke suppressant, this product is especially suitable for applications like cables and wires made of polyvinyl chloride (PVC). Notably, SmokeShield® ZB8 also serves as a char forming agent, adding an additional layer of fire protection.