Products in Jacketing & Insulation

AGC Chemicals Americas, Inc. Fluon+™ PVDF Red 9 Concentrates are red-colored concentrates designed for use in PVDF (Polyvinylidene fluoride) for pigmentation. The color concentrates are based on Arkema Kynar® PVDF 2850-04 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon® PFA P-66P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for extrusion, transfer, compression, and injection molding, and offers the best resistance to stress cracking among the PFA materials.

AGC Chemicals Americas, Inc. Fluon® PFA P-62XP (perfluoroalkoxy) is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. Fluon® PFA P-62XP has chemical, electrical, and thermal properties almost identical to its close chemical cousin, polytetrafluoroethylene (PTFE), yet can be processed by conventional extrusion, injection molding, blow molding, and transfer molding techniques. This unique material can be used over a wide range of temperatures (-200°C to 260°C). It is available as a 1/8 inch pellet.

AGC Chemicals Americas, Inc. Fluon+™ mPEEK KB-2020 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPEEK KB-2020 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon+™ FP-EC-100 (464120041) is a conductive ETFE product that is designed for use in wire and cable applications. Carbon black is added for conductivity and to improve certain physical properties of ETFE. This compound is supplied in cylindrical pellet form and the pellets are approximately 0.125” in length by 0.085” in diameter.

AGC Chemicals Americas, Inc. Fluon+™ FEP 100 Violet Concentrates are violet-colored concentrates designed for use in low-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Chemours Teflon® FEP 100 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 102 Red Concentrates are red-colored concentrates designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Neoflon® FEP NP-102 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PVDF Aqua 9 Concentrates are aqua-colored concentrates designed for use in PVDF (Polyvinylidene fluoride) for pigmentation. The color concentrates are based on Arkema Kynar® PVDF 2850-04 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ mPEEK KB-2030 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPEEK KB-2030 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 Gray Concentrate is a gray color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PVDF Blue 10 Concentrates are blue-colored concentrates designed for use in PVDF (Polyvinylidene fluoride) for pigmentation. The color concentrates are based on Arkema Kynar® PVDF 2850-04 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 2100 Blue Concentrate is a blue color concentrate designed for use in medium flow PFA (Perfluoroalkoxy) for pigmentation. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It is used in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ mPEEK KB-1120 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPEEK KB-1120 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM HT Gray Concentrate is a gray-colored concentrate designed for use in medium to high-flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM-HT and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon® PFA P-65P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for general-purpose extrusion and injection molding and offers better stress crack resistance compared to P-63P.

AGC Chemicals Americas, Inc. Fluon+™ FP-EF-105 (464102520) is a 25% glass-reinforced ETFE product designed for use in injection molding or extrusion applications. The glass fibers are added to improve the physical properties of ETFE. This compound is supplied in cylindrical pellet form and the pellets are approximately 0.125” in length by 0.100” in diameter.

AGC Chemicals Americas, Inc. Fluon+™ PFA 3000 Gray Concentrate is a gray-colored concentrate designed for use in high-flow PFA (Perfluoroalkoxy) for pigmentation. The color concentrate is based on Fluon® PFA P-62X and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 100 Black Concentrates are black-colored concentrates designed for use in low-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Chemours Teflon® FEP 100 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM HT Goldenrod Concentrate is a goldenrod-colored concentrate designed for use in medium to high-flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM-HT and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FP-E-93000 XL NATURAL HF contains a crosslinking promoter in an ETFE (ethylene tetrafluoroethylene) polymer matrix. This cross-linkable compound is based on Fluon® ETFE and is supplied in cylindrical pellet form, approximately 3.2 mm in length by 2.0 mm in diameter.

AGC Chemicals Americas, Inc. Fluon+™ FEP 100 Orange Concentrates are orange-colored concentrates designed for use in low-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Chemours Teflon® FEP 100 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 Blue Concentrate is a blue color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9400 Yellow Concentrate is a yellow-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM HT Violet Concentrate is a violet-colored concentrate designed for use in medium to high-flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM-HT and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9800 Yellow Concentrate is a yellow-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 102 White Concentrates are white-colored concentrates designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Neoflon® FEP NP-102 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 102 Blue Concentrates are blue-colored concentrates designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Neoflon® FEP NP-102 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 108 Brown Concentrate is a green-colored concentrate designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Daikin Neoflon® FEP NP-108 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FP-E-93000 XL NATURAL LF contains a crosslinking promoter in an ETFE (ethylene tetrafluoroethylene) polymer matrix. This cross-linkable compound is based on Fluon® ETFE and is supplied in cylindrical pellet form, approximately 3.2 mm in length by 2.0 mm in diameter.

AGC Chemicals Americas, Inc. Fluon+™ FEP 108 Green Concentrate is a green-colored concentrate designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Daikin Neoflon® FEP NP-108 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9400 Green Concentrate is a green-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 Black Concentrate is a black color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9400 Red Concentrate is a red-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM HT White Concentrate is a white-colored concentrate designed for use in medium to high-flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM-HT and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 102 Green Concentrates are green-colored concentrates designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Neoflon® FEP NP-102 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9800 Orange Concentrate is an orange-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.