Products in Tubing & Fluids Handling

Fainplast Compounds PVC MPH 80/G is comprised of Polyvinyl Chloride. It is commonly used for a variety of applications. .

Norprene A70F is a Thermoplastic Elastomer (TPE) product. It is available in North America. Applications of Norprene A70F include hose/tubing, sealing applications and wire & cable.Characteristics include: Heat Resistant Wear Resistant

KPC® KLC-55 by Kadakia Plastics and Chemicals is a general purpose, flexible polyvinyl chloride (PVC) grade. Is suitable for processing by profile extrusion. Possible applications of KPC® KLC-55 could be complex profiles & shapes, sleeving, hose tubing, tapes & fiber coating and molding applications such as electrical plugs, handles and intricate parts.

Tygon S-54-HL is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon S-54-HL include medical/healthcare and hose/tubing.Characteristics include: Low to No Odor/Taste Non-Toxic

Kettlitz-Mediaplast NB-7 is a special diisononyl dicarboxylic acid ester which can replace existing phthalate plasticizers in compounds based on polar rubbers like NBR, HNBR, CR, ACM, VAMAC etc. Mediaplast NB-7 shows minor volatility at an extremely low setting point. Therefore this plasticizer is suitable to produce rubber articles with high heat resistance and excellent low temperature propertiesas well.

Pertac/GR is a multifunctional process aid based on 1.2-polybutadiene converted into free-flowing granules.

Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections 2403 HSSP BK is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

Densetec® Shield is a product specially designed for nuclear shielding applications. The material employs 5% Boron by weight to shield neutrons in a variety of applications including high intensity X-rays, cancer treatment facilities, nuclear submarines, and nuclear power plants.

TAC/GR 50 is a 50 % and TAC/GR 70 a 70 % triallylcyanurate (TAC) in granular form. TAC/GR gran-ules are more stable and better applicable in automatic weighing machines than TAC/GR 70, whereas the latter contains a higher amount of active substance.

Elastocon® SMR1600 by Elastocon TPE Technologies is comprised of Thermoplastic Elastomer (unspecified). It is commonly used as Extrusion Resin and Molding Resin for a variety of applications. Elastocon® SMR1600 is certified as RoHS Compliant. It is available in Pellets form.

Fainplast Compounds Fainplast™ PVC MPH 62/D is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 62/D include hose/tubing and medical/healthcare.

Trelleborg Industries UK TPE are a copolymer mixture of a rubber and a plastic and exhibit properties of both materials. TPEs require virtually no compounding, reinforcing agents, stabilizers or curing agents, providing consistent batch to batch properties. When extruded into tubing, the material is translucent, flexible, resists kinking, making it ideally suited for pumping and fluid transfer applications.

Addisil™ 2070 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations KTW: German Water Regulation. A representative sample has passed the test for tubes, fittings, seals and strorage systems (cold and warm) WRAS (BS 6920). A representative sample has passed the test (cold and warm) W270: Microbiological growth test. A representative sample has passed the test.

TUFFALLOY 4270 is a series of Liquid Molding Compounds with thermoplastic properties such as high impact, high heat distortion, and low viscosity. This unique chemistry developed by Hapco to meet today's market demands for prototype and low production parts needs.THE TUFFALLOY 4270 Series are available in (4) speeds.The user has the ability to use different speeds of TUFFALLOY 4270, typically using a slower speed initially and increasing to a fast set, 1 minute working life.PROCESSING: TUFFALLOY 4270 Series can be pressure cast, vacuum cast, or open cast. For best results, TUFFALLOY 4274/75 should be used with Hapco's metering/dispensing equipment, RAPIDFIL, MINI FIL, and RAPIDSHOT.

Kezadol GR/DAB is a soft granule of approx. 77.5 % calcium oxide coated with special dispersing agents. For delaying the reactivity of the CaO, our product is treated with special white oil corre-sponding to BfR- and FDA-regulations.

TheAddisil™ IND 2060 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

Sylvin Technologies Sylvin™ 5132-75UV Black is a vinyl compound formulated for wire insulating applications such as speaker wire, booster cable, and extruded tubing. This compound contains an ultra violet stabilizer.

WellsStat - Antistatics can be added to polymers to minimize the natural tendency of most plastics to accumulate static charges. Antistatics are based mainly based on migratory additive systems, which can give fast and long term stable antistatic properties. Migratory additives rely upon the presence of atmospheric humidity to give optimum performance.

Fainplast Compounds PVC MPH 92/T1 is comprised of Polyvinyl Chloride. It is commonly used for a variety of applications. .

Miracll Chemicals E 190 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Goodyear Rubber Company of So. California Fluoroelastomers are a family comprising copolymers of hexafluoropropylene, vinylidene and terpolymers of tetrafluoroethylene. Viton is a common brand of fluoroelastomers and widely used in high temperature sealing and chemical resistant applications. Fuoroelastomers are known as FKM, categorized under ASTM designation. FKM tubing or hoses are recommended in automotive and other transportation applications. FKM O-rings are alternative to Nitrile rubber products in automobile engines with much higher temperature and chemical resistant applications.

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

Elastocon® STK60 thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK60 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK60 can be overmolded to polycarbonate, ABS, PC/ABS, Acrylic, PS, and various grades of polyamide/nylon.Elastocon® STK60 is supplied as ready to use pellets in 50 lb. bag and 1000 lb. bulk quantities.

Vetronite® FR-5 HF CTI 600M T is composed of epoxy resin and glass fabric reinforement.

PI Glide™ Custom Coating is a group of high performing polymers known for their exceptional chemical, thermal, and mechanical performance properties. These materials demonstrate exceptional thermal stability in high and low temperatures and are extremely flame resistant. PI Glide™, our PI / PTFE composite, is a high lubricity polyimide blend for applications that require lower surface friction yet do not require the performance of pure PTFE. PI Glide™ maintains broad chemical resistance and good dielectric properties in addition to its reduced coefficient of friction. PI Glide™ is available in tubing and as a coating for over-the-wire (OTW, insulated wire) applications. For insulated wire, PI Glide™ provides a low-friction wire for easier deployment or insertion into tubing. With PI Glide™ tubing, inside diameters offer low resistance to inserted devices or tools (pushability) while the outside remains bondable without etching. PI Glide™ can also be produced in a layered composite construction with our conventional polyimide or with PI Glide™ alone. Composite layering polyimide and PI Glide™ allows users to further tailor polyimide tubing or coating properties.

Silplus™ 60 EX is a heat cured silicone rubber base compound that is an excellent candidate to consider for use in extrusion, press-molding injection and calendaring. Silplus™ 60 EX heat cured silicone may be considered for use in a wide variety of high quality applications such as high durometer tubes and profiles.Key Features and Benefits excellent extruding processability good mechanical properties high green strength easily blendable versatile Potential ApplicationsBecause of its outstanding properties, Silplus™ 60 EX heat cured silicone is an excellent candidate to consider for use in most types of extrusion and calendaring applications.

Sylvin Technologies Sylvin™ 5132-70 Clear Red 6249 is a clear vinyl compound formulated for wire insulating applications such as speaker wire, booster cable, and extruded tubing. This compound can be color matched to a variety of colors.

Fainplast Compounds Fainplast™ PVC MPH 75/T is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 75/T include hose/tubing and medical/healthcare.

Elastocon® 2865PE thermoplastic elastomer has been developed for applications that require rubber-like properties and a good surface finish. Elastocon® 2865PE is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 2865PE can be overmolded and coextruded with polyethylene.Elastocon® 2865PE is supplied as ready to use pellets in 50 lb. quantities.

Fainplast Compounds PVC MPH 83/TS is comprised of Polyvinyl Chloride. It is commonly used for a variety of applications. .

PermaFelx® 75 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

EVERLON® TP-38D comply with a international standard , such as ISO 15759, usp class VI, YBB standard. Using on plastic plunger, Syringe, thin film, medical tube, pull cap...etc.

Elastocon® SMR1555 by Elastocon TPE Technologies is comprised of Thermoplastic Elastomer (unspecified). It is commonly used as Extrusion Resin and Molding Resin for a variety of applications. Elastocon® SMR1555 is certified as RoHS Compliant. It is available in Pellets form.

PHOENIX™ 02301 is an excellent scratch resistance for bonding with polypropylene and RoHS compliant. It is conform to FDA and suitable for medical tube with tools grip syringe stopper.

S V Plastochem Calcium Zinc (Liquid) is used in food grade transparent rigid/ soft applications, medical applications.

Norprene A60F is a Thermoplastic Elastomer (TPE) product. It is available in North America. Applications of Norprene A60F include hose/tubing, sealing applications and wire & cable.Characteristics include: Heat Resistant Wear Resistant