Products in Tubing & Fluids Handling

This product is a Polyurethane system If the product is cured at room temperature, no entire chemical and mechanical load before 7 days after curing.

LIM™ 6071 is the next generation in 70-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6071 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications Sports goggles and masks Health care profiles Camera parts Metal roll coatings.

Nanjing Shuguang Chemical Group Antioxidant SG-R 330 is a kind of hindered phenol antioxidants with high efficiency, low toxicity, low volatility, and pollution free. Antioxidant 330 is white crystalline powder and stable at high temperature. It has low volatility, no pollution, no oral toxicity. Different from the other antioxidants, it can’t be absorbed by animals’ or human’s tissues after oral taking, and entirely vent from dejection. Approved by FDA, it is suitable for rubber products and plastic apparatus which are used in food, medical and health care areas. It is widely used as antioxidant and heat stabilizer in high or low density ployethylene, polypropylene, polystyrene, polyacetal, chlorinated polyether, polyamide, natural or synthetic rubber, adhesive and lubricating oil with high melting point. It can improve aging resistance, high temperature resistance, withstanding pressure, abrasion resistance, oxidation resistance of the product to keep good luster and prolong lifetime. It can be applied to package of food to keep good luster of plastic. It is also used in cable material, because of its low dielectric loss, the performance is obviously better than old antioxidants such as Irganox 1010.

MARFRAN.MED® ST has a high versatility to satisfy every request, all materials can be colored and available in transparent or crystal, suitable for both production by injection molding and for extrusion.

Fainplast Compounds Fainplast™ PVC MPH 78/OP is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 78/OP include medical/healthcare and hose/tubing.

Miracll Chemicals E 180 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Dispergator KB contains 25 % more active material and less moisture than Dispergator DS. It fa-vourably can be used in all rubber compounds which are intended to be cured by UHF, LCM or hot air. It also has good compatibility with most polymers.

Fainplast Compounds PVC MPH 85/XT is comprised of Polyvinyl Chloride. It is commonly used for a variety of applications. .

Elastocon® 2860L is a translucent lubricated thermoplastic elastomer that has been developed for applications that require rubber-like properties, a good surface finish, and a reduced coefficient of friction. Elastocon® 2860L is FDA compliant and well suited for consumer products and medical applications. Elastocon® 2860L can be overmolded onto polypropylene.Elastocon® 2860L is supplied as ready to use pellets in 50 lb. bag quantities.

Dispergator OX is a Polymer- and water-free granulated processing aid, suitable for all natural and synthetic elastomers, and especially helpful in polymer blends. Dispergator OX is particularly recommended for pressureless continuous curing processes, as it con-tains no moisture.

Elastocon® SMR1000 by Elastocon TPE Technologies is comprised of Thermoplastic Elastomer (unspecified). It is commonly used as Extrusion Resin and Molding Resin for a variety of applications. Elastocon® SMR1000 is certified as FDA and RoHS Compliant. It is available in Pellets form.

Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections Specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

Fainplast Compounds Fainplast™ PVC MPH 69/D is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 69/D include hose/tubing and medical/healthcare.

Black 6678 is an economy black LDPE based masterbatch containing high opacity carbon black.This product is designed for general-purpose extruded tubings,sheets and film blowing.

Astlett Rubber Inc SKI-3S is produced by solution polymerization of isoprene with titanium as the catalyst. The rubber is stabilized by a non-staining BHT antioxidant that is approved for medical purposes and alimentary product uses. SKI-3S can be mixed with natural and synthetic rubbers and is non-staining.

Elastocon® 3353 is a white S-B-S thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 3353 is heat sealable and well suited for consumer goods and extruded tubing and profile applications. Elastocon® 3353 can be overmolded and/or coextruded onto polystyrene.Elastocon® 3353 is supplied as ready to use pellets in 50 lb. bag quantities.

Haftolat or the dry form, Haftolat/P, are very effective process aids produced from EPM rubber. I

Franplast Fatty food USP Cl. VI is the new crystal clear TPE compound, based on SEBS, suitable for contact with fatty food in accordance with the European Regulations. It is completely compliant with 10/2011/EU and also 1907/2006/CE, ROHS, RAEE, WEEE, ELV, EN71/3. This innovative compound is characterized by an extremely low migration level, when in contact with simulant D2 (olive oil). Chemiton for fatty food can be processed with conventional plastic processing technology such as injection molding and extrusion. Other important features are the extremely high resistance to alcohols and the sterilization by steam-autoclave.

Kettlitz-Dispergator DS is a dispersing agent improving flow and extrusion properties of rubber compounds. The material, based on a water-in-oil emulsion of higher alcohols, esters and aliphatic fatty acids, is recommended to be used in EPDM and EPM, in NBR and butyl rubber compounds.

Mediaplast PM is a synthetic aromatic plasticizer based on polyalkylbenzene (bi- and trialkylated aro-matics), which is mainly recommended for the use in elastomers with low to medium polarity, i. e. NR, IIR, BR, SBR, EP(D)M for example, but also CR, CM/CSM, EVA and PNR. Especially in polychloro-prene the often used, expensive ester plasticizers can be replaced completely.

Elastocon® 8058HL is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 8058HL is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8058HL can be overmolded to polypropylene.Elastocon® 8058HL is supplied as ready to use pellets in 1000 lb. quantities.

Oxy Vinyls 216S is suspension PVC resin designed for rigid applications.

Nylene Very high viscosity extrusion resin having an ASTM relative viscosity of 800 Excellent structural strength, durability, and physical properties Good melt strength and good draw-down properties which promote dimensional control for extrusion of pipe, tubing, film, and sheet Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles Optimum processing conditions should permit for a melt temperature of 550 - 575°F at the die.

Tygon R-3603 is a Polyvinyl Chloride product. It is available in North America. Typical application: Hose/Tubing.Characteristics include: Low to No Odor/Taste Chemical Resistant Clarity Corrosion Resistant Good Flexibility

LIM™ 6061 is the next generation in 60-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounds, and valve parts can be made readily from LIM6061 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications sports goggles and masks health care profiles camera parts coating metal rolls.

The Addisil™ IND 1070 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

Samicanite-® S T is composed of silicone resin and mica paper reinforement.

Sylvin™ 2981-80 Natural is a vinyl compound formulated with FDA sanctioned ingredients for extruded tubing applications.

Elastocon® 8028N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8028N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8028N can be overmolded to polypropylene.Elastocon® 8028N is supplied as ready to use pellets in 50 lb. bag quantities.

Fainplast Compounds Fainplast™ PVC MPH 67 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 67 include medical/healthcare and hose/tubing.

EVERLON® TM-45GWX comply with a international standard , such as ISO 15759, usp class VI, YBB standard. Using on plastic plunger, Syringe, thin film, medical tube, pull cap...etc.

Silopren™ LSR 4660 is a two-component liquid silicone rubber for injection molding processes. The material performance is particularly characterized by high reactivity, low viscosity and high tear strength. The LSR 4660 enables particularly the production of parts for healthcare devices covering by USP Class VI such as sealing elements, O-rings, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters and mats.Key Features and BenefitsVulcanisates consisting of LSR 4660 are distinguished by the following properties: low viscosity and fast cure high tear strength sterilisable with ethylene oxide, steam and gamma radiation long service life at dynamic stress neutral odor and taste high recovery after puncture high temperature stability FDA 21 CFR 177.2600 compliance with US Pharmacopeia XXIII, Class VI (maximum contact time with human tissue 28 days).

Elastocon® CLR75 is a transparent thermoplastic elastomer that has been developed for applications that require oil/plasticizer free, non-blooming high strength properties and a tactile surface finish. Elastocon® CLR75 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR75 can be overmolded onto polypropylene.Elastocon® CLR75 is supplied as ready to use pellets in 1000 lb. quantities.

Nylene Heat stabilized version of NYLENE 600 which is a general purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 480°F - 500°F at the die

Polymer Industries integrates the antimicrobial protection into the product during the manufacturing process. Our antimicrobial material kills or inhibits the growth of microorganisms caused by bacteria, algae and fungi. Our products are also non-porous and kill the spread of bacteria resistant to moisture and mildew. The need to combat infectious diseases continues to increase in all commercial applications. Healthcare facilities and public venues are ideal locations for antimicrobial surfaces. In addition, antimicrobial surfaces are needed in food preparation areas, with food processing equipment and on industrial cutting surfaces. These products limit bacteria growth improving the hygiene of surfaces. Antibacterial products are created by incorporating an antibacterial agent (biocide) to suppress the growth of bacteria on the surfaces of products through a process called zone inhibition to control growth of bacteria, fungus and algae. Unlike surface antimicrobials, the advanced antimicrobial technology protects against bacterial degradation for the lifetime of the product. Antimicrobial products are treated with an antimicrobial agent to inhibit bacterial or fungal growth and are resistant to deterioration by mold, fungus or mildew. Studies have shown that surfaces with antimicrobial technology can inhibit the the amount of certain product-damaging bacteria by 99%. Disclaimer: Products prepared according to ASTM standards. This product does not protect users from diseases. Always clean surfaces thoroughly with household disinfectant.

Chemiton® XT is classifying the series of products based on SEBS especially for extrusion and co-extrusion. Chemiton® XT compounds ensure the production of extruded parts with exceptional flexibility, resistance to high and low temperatures and various levels of insulation. There are also crystal clear grades available which are completely plasticizer- free and with excellent UV and ozone resistance.