Products in Tubing & Fluids Handling

Elastocon® 8068N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8068N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8068N can be overmolded to polypropylene.Elastocon® 8068N is supplied as ready to use pellets in 50 lb. bag and 1000 lb. box quantities.

Polyplastics Group Topas® 6015S-04Product DescriptionTOPAS 6015S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (150°C) heat distortion temperature to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM) TOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C) Topas® 6015S-04Topas® 6015S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Nylene General purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 481°F - 500°F at the die

Manifattura Cattaneo PVDF is a Non-toxic semi-crystalline thermoplastic with high chemical resistance. Suitable for contact with food.

Fainplast Compounds Fainplast™ PVC MPH 69/T is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 69/T include hose/tubing and medical/healthcare.

Silopren™ LSR 4060 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4060 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 4060 are distinguished by the following properties: Excellent biocompatibility High stability to ozone and ultraviolet light Neutral odor and taste Sterilisable with ethylene oxide, steam and gamma radiation Good transparency High thermal stability High recovery after puncture Easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4060is particularly suitable for the following elastomeric articles: sealing elements, diaphragms, bellows, respiratory devices, vibration dampers, tube connectors, pipette nipples, catheters, parts for medical technical equipment, mats s.o.

Samicanite-® S T is composed of silicone resin and mica paper reinforement.

Polymer Industries integrates the antimicrobial protection into the product during the manufacturing process. Our antimicrobial material kills or inhibits the growth of microorganisms caused by bacteria, algae and fungi. Our products are also non-porous and kill the spread of bacteria resistant to moisture and mildew. The need to combat infectious diseases continues to increase in all commercial applications. Healthcare facilities and public venues are ideal locations for antimicrobial surfaces. In addition, antimicrobial surfaces are needed in food preparation areas, with food processing equipment and on industrial cutting surfaces. These products limit bacteria growth improving the hygiene of surfaces. Antibacterial products are created by incorporating an antibacterial agent (biocide) to suppress the growth of bacteria on the surfaces of products through a process called zone inhibition to control growth of bacteria, fungus and algae. Unlike surface antimicrobials, the advanced antimicrobial technology protects against bacterial degradation for the lifetime of the product. Antimicrobial products are treated with an antimicrobial agent to inhibit bacterial or fungal growth and are resistant to deterioration by mold, fungus or mildew. Studies have shown that surfaces with antimicrobial technology can inhibit the the amount of certain product-damaging bacteria by 99%. Disclaimer: Products prepared according to ASTM standards. This product does not protect users from diseases. Always clean surfaces thoroughly with household disinfectant.

Antitack BTO-15 is an antitack agent which was developed step by step based on many years of experi-ence in the rubber industry. It meets all the requirements of the modern rubber industry and is especially designed for the use in batch-off machines fitted with spraying or dipping systems.

Norprene A60F is a Thermoplastic Elastomer (TPE) product. It is available in North America. Applications of Norprene A60F include hose/tubing, sealing applications and wire & cable.Characteristics include: Heat Resistant Wear Resistant

Paracril OZO3341 is a pre-fluxed blend of NBR/PVC containing 30% PVC and 28% BAN NBR base polymer.

Fainplast Compounds Fainplast™ PVC MPH 69/H is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 69/H include hose/tubing and medical/healthcare.

Black 6686 is an economy black LDPE based masterbatch containing high opacity carbon black.This product is designed for general-purpose extruded tubings,sheets and film blowing.

Trelleborg Industries UK PVC is available in rigid and flexible forms. PVC can be extruded in a wide range of durometers and colors to meet virtually any need. Medical grade PVC tubing is resistant to many chemicals, solvents, corrosion and has a long life expectancy. It is also resistant to most sterilization methods. It’s extremely smooth surface provides maximum fluid flow characteristics, reducing sediment build up which could lead to bacterial growth.

Elastocon® OF75 by Elastocon TPE Technologies is comprised of Thermoplastic Elastomer (unspecified). It is commonly used as Extrusion Resin and Molding Resin for a variety of applications. Elastocon® OF75 is certified as FDA. It is available in Pellets form.

Rubaloy RA - 7573 is a high performance grade, offering excellent ozone, oil and abrasion resistance. It is non-staining and is made from 70% medium ACN content NBR and 30% from PVC Resin.

The Addisil™ 472 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

VTEC™ GF63 is a High temperature resistance and it is Superior mechanical properties

Fainplast Compounds Fainplast™ PVC MPH 80 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 80 include medical/healthcare and hose/tubing.

Tygon R-1000 is a Polyvinyl Chloride product. It is available in North America. Typical application: Hose/Tubing.Characteristics include: Corrosion Resistant Low to No Odor/Taste

Sylvin Technologies Sylvin™ 5132-70UV Clear is a clear vinyl compound formulated for wire insulating applications such as speaker wire, booster cable, and extruded tubing. This compound contains an ultra violet stabilizer and can be color matched to a variety of colors.

Polyplastics Group Topas® 6017S-04Product DescriptionTOPAS 6017S-04 is an injection molding grade with a high heat distortion temperature (170°C) and exceptional dimensional stability. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for precision optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has excellent heat resistance to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Precision componentry Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware High Temperature Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Dimensional stability, high tolerances Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM) TOPAS 6015S-04 - high heat distortion resistance (150°C) for 134°C protocols Topas® 6017S-04Topas® 6017S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Fainplast Compounds Fainplast™ PVC MPH 57 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 57 include engineering/industrial parts, hose/tubing and medical/healthcare.

Sylvin Technologies Sylvin™ 5132-75UV Red 6281 is a vinyl compound formulated for wire insulating applications such as speaker wire, booster cable, and extruded tubing. This compound contains an ultra violet stabilizer.

The Addisil™ 440 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

Elastocon® SMR1555 by Elastocon TPE Technologies is comprised of Thermoplastic Elastomer (unspecified). It is commonly used as Extrusion Resin and Molding Resin for a variety of applications. Elastocon® SMR1555 is certified as RoHS Compliant. It is available in Pellets form.

PBY Plastics PB21000M is a compression molded virgin Poly(Fluorinated Ethylene-Propylene) copolymer (FEP) premium grade.

EVERLON® TP-38D comply with a international standard , such as ISO 15759, usp class VI, YBB standard. Using on plastic plunger, Syringe, thin film, medical tube, pull cap...etc.

PharMed PharMed Tubing is a Thermoplastic Elastomer (TPE) product. It is available in North America. Applications of PharMed PharMed Tubing include medical/healthcare, food contact applications and plumbing/piping/potable water.Characteristics include: Chemical Resistant UV Resistant

Miracll Chemicals E 195 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Tygon SE-200 is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon SE-200 include food contact applications, medical/healthcare and hose/tubing.Characteristics include: Low to No Odor/Taste Chemical Resistant Clarity Good Flexibility

VTEC™ BG21 is a High temperature resistance and it is Superior mechanical properties

Addisil™ 2050 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations KTW: German Water Regulation. A representative sample has passed the test for tubes, fittings, seals and strorage systems (cold and warm) WRAS (BS 6920). A representative sample has passed the test (cold and warm) W270: Microbiological growth test. A representative sample has passed the test.

Vetronite® EGS T 23 T is composed of epoxy resin and glass fabric reinforement.

Fainplast Compounds Fainplast™ PVC MPH 83 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 83 include medical/healthcare and hose/tubing.