Products in Industrial Adhesives & Sealants

PURETOL™ 9D is an odorless and colorless Europe grade white mineral oil with a Saybolt viscosity of 85 and a specific gravity of 0.858. This product meets US FDA CFR 172.878 and FDA 21 CFR 178.3620(a) requirements. This material meets the purity requirements of European Pharmacopeia (Ph. EUR.) - Paraffin, Liquid and National Formulary (NF) - Light Mineral Oil requirements which is used for a variety of applications such as blending food grade lubricants and in the production of cosmetics and pharmaceuticals.

Photomer® 8061 is a novel aliphatic monofunctional acrylate (TPGMEMA) of low skin irritancy, low viscosity, low surface tension and low odor. It exhibits good solvency and viscosity reducing characteristics with typical UV/EB curable oligomers and prepolymers.

Omnivad SB Flakes is an organic filler. For absorbent substrates Omnivad SB Flakes can act as a hold-out additive, preventing low viscosity coatings or inks from soaking into the substrate. This additive will help with enhancing higher gloss, increase color strength and improve cure. This Resin is compatible with radically curable inks, coatings and adhesives.

PHOTOMER® 6578 is a low viscosity tetra functional aromatic acrylate, which gives very good abrasion and scratch resistance in combination with high flexibility.

AGITAN P 823 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 823 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 823 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.

Magna-Tac™ E645 is a two-part, thermosetting, formulated epoxy adhesive for bonding stack laminations used in stators, rotors, gyros, servomechanisms, synchros, transformers and magnetic amplifiers. It can also be used as an insulating varnish for impregnated coils and small electrical equipment. Bonding is achieved by heat. Only sufficient pressure to assure complete contact is needed.

LESTAC TM100 is terprene modified pale yellow thermoplastic resin obtained from mainly polymerizing unsaturated aliphatic 1,3-pentadiene (1,3-piperlene) and some monomers derived from the process of thermal cracking of naphtha. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. This grade also can be use as the binder for rubber compound, tire, etc.

LHC724 Heat Conductive Sealant Retainer is Black liquid in appearance.

Eco-Tite 5525 (Hybrid) is a one component self leveling, medium modulus, fast curing, silyl-terminated polyether (hybrid) elastomeric adhesive and sealant. When fully cured, this unique VOC compliant formula offers UV stability and tenacious stress free adhesion to PVC, concrete, aluminum, painted surfaces, wood, plywood, marble, metal, plus many other common substrates. This product is specifically formulated to offer all weather performance to meet today's Green Building Standards.

PHOTOMER® 6639 is a low viscosity tri functional aliphatic urethane acrylate, which gives good chemical and mechanical resistance in combination with high flexibility

AGITAN DF 6120 is a defoamer for all common emulsion systems. It provides the following properties which controls foaming and aeration during paint manufacture, filling and application, extremely cost effective, good compatibility in a wide range of systems, long lasting efficiency.

LUBA-print® 154/C is a Wax dispersion / Wachsdispersion. It is also used as aqueous paint-systems, to improve slip and mar resistance. aqueous flexo printing inks to improve the rub resistance. Hot melts, to improve antiblocking properties.

PHOTOMER® 3016-40G is a moderate viscosity, non volatile, acrylic ester derived from a low molecular weight aromatic epoxy resin. The product exhibits very fast cure speed.

Silquest™ VS-604 silane typically provides excellent performance in the potentially cost-effective production of moisture crosslinkable silylated polyolefin compounds. It is a modified vinyltrimethoxysilane that may be considered for use in the manufacture of pipe, wire and cable and industrial goods.

POLYTONE™ AP 109 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.

TRUFAST® Roofing Adhesive is a two-component, low-rise, construction grade, polyurethane foam adhesive designed to adhere approved roof insulations, thermal barriers, cover boards and fleece backed single- ply membranes to acceptable substrates. This VOC, CFC, HCFC and solvent free adhesive is quickly and easily applied. Trufast Roofing Adhesive is applied in continuous ribbons or beads spaced 4”, 6” or 12” on center depending on the project and code requirements. FM approved assemblies over various deck types are available.

TAFIGEL PUR 82 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 82 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 82 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 82 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks. TAFIGEL PUR 82 is suitable for indirect food contact applications.

POLYTONE™ AP 131 is a non heat reactive thermoplastic phenol-alkyl phenol resin designed for use in synthetic and natural rubber based compounds in Applicationss that require high hardness compounds that process easily.

GS® 424 Sealant is a non-curing polysulfide base sealant. The outstanding features of this sealant is its resistance to oil, jet fuel, gasoline, and solvent even at elevated temperatures of 180°F (82°C).

A universal workhorse defoamer effective in most adhesives including wood glue, envelope & label, construction, and natural/neoprene formulations. DEE FO 97-3 is also efficient in pigment dispersing and defoaming metallic inks. The defoamer provides excellent persistence in OPV, wood finishes, and a variety of industrial coating formulations as well.

ResinLab® RC8040 anaerobic retaining compounds are designed for use in demanding applications to fill the spaces and surface irregularities between tightly mated cylindrical parts. These products form a tough permanent bond which greatly enhances the torque and pullout strength. They are single component solvent free materials manufactured in a wide variety of viscosities and setting times to satisfy specific bonding applications. This technology increases the reliability and performance of assemblies while reducing dependence upon maintaining costly tight machining tolerances.

SONLOK® 3675 is a low viscosity, high strength, general-purpose anaerobic retaining compound specifically designed for joining cylindrical assemblies. The temperature range for this product is -65°F to 300°F. SONLOK® 3675 cures when confined between ferrous or copper alloy metals. On thermoplastics or other inactive metals, primer is necessary.

AGITAN 307 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.

Drolite™ 9040 is a phenalkamine used as a curing agent for various epoxy resins. Specially for marine coatings and other Industrial applications.

BONTAMIDE 2031 is an odorless standard hardener for epoxy resin

Kraton D1124 P is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton D1124 PT - supplied as a dusted dense pellet Kraton D1124 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Taoka Chemical RP-20X is a cyanoacrylate adhesive that contains ethyl -2-cyanoacrylate used in bonding of metals, plastics, rubbers, wood etc. With humidity cure.

PURETOL™ 35 is an odorless and colorless white mineral oil with a Saybolt viscosity of 352 and a specific gravity of 0.863. This product meets US FDA CFR 172.878 and FDA 21 CFR 178.3620(a) requirements. This material meets United States Pharmacopeia (USP) - Mineral Oil requirements which is used for a variety of applications such as blending food grade lubricants and in the production of cosmetics and pharmaceuticals.

A high efficiency foam control additive designed especially for OPV and most printing inks, such as corrugated, coated paper, packaging, film and foil.

Franklin International Laminating 460 is a one-part, crosslinking polyvinyl acetate emulsion adhesive developed especially for bonding HPL and wood veneer to fire-rated particleboard and fiberboard. It can be mixed with Aluminum Chloride (Catalyst A) as a two-part system to improve water resistance. It can be hot pressed or cold pressed.

Esacure TZT is particularly indicated for the photo polymerisation of UV curable systems when high reactivity, low curing odor and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines.

GS® SCX is a black extruded sealant that was primarily formulated and designed to be used in conjunction with heat shrinkable tubes and sleeves.

Kraton D1155 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied from Europe in the physical form identified below. Kraton D1155 ES - supplied as porous pellets dusted with amorphous silica Kraton D1155 E is used in the modification of polymers and in compounds for technical and footwear applications. It is also used in formulating adhesives, sealants and coatings and as a modifier for bitumen.

Kraton D1101 A polymer is a clear, linear block copolymer based on styrene and butadiene bound styrene of 31% mass. 

Daikalac 5040 is a solution type of synthetic resin obtained by the polymerization of monomers such as vinyl acetate, acrylic ester and styrene in the presence of a solvent such as ethyl acetate and methanol.

Photomer 6024 is an aliphatic urethane diacrylate oligomer which exhibits, good flexibility, yellowing resistance and good UV/EB cure reactivity.