Products in Industrial: Epoxy & Epoxy Derivatives

CPP™ Sprayliner™ is two-component moisture insensitive, highly adhesive, chemical resistant, 100% solids, high strength and reinforced epoxy. Equal to “standard” CPP once cured, this version is packaged more conveniently for spray applicators seeking to utilize plural-component heated spray application. The material can be sprayed ultra-high build, between 1/16” - 1/4” (62.5 - 250 miles) per pass. Blended with reinforcing agents and various fibers, the Epoxytec CPP™ Sprayliner™ when cured creates reinforcement lining as a fiber-reinforced-polymer (FRP), with high strength and flexural properties for partially or fully deteriorated structures.

Rhino Linings USA, Inc. 1337 Resin is a High Temperature Epoxy Novolac Tooling Resin. High temperature Novolac laminating and tooling epoxy. 350°F HDT after post cure.

SYMPOXY 1225FR-CA561 is a filled, two component epoxy system that is pigmented black.

ACG® 600 T23 is composed of epoxy resin and synthetic fabric reinforcement.

Mainstay® 714™ Flake Glass Epoxy Novolac Vinyl Ester Coating is designed for application over steel and concrete substrates. Mainstay® 714 is resistant to a wide variety of chemical exposures including many strong organic and inorganic acids, solvents, alkaline chemicals, and some oxidizing agents. It is well suited for use in immersion, splash, and spill service. M Mainstay® 714 may be used as a topcoat over Mainstay® DS-5 100% Solids Epoxy Coating and Mainstay® ML-72 Sprayable Microsilica Restoration Mortar for concrete structures that require surface restoration as well as protection from aggressive chemical environments.

SAUEREISEN Fast-Trak NovolaK Glaze 229 is a coating system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. FastTrak has the chemical resistance to withstand bleaches, liquors and other corrosive substances that attack unprotected trenches, sumps and chests in paper mills. Depending on the chemical and temperature environment, Fast-Trak is available in either vinyl ester or novolak epoxy formulations which are used with an appropriate Sauereisen Primer.

Ebalta AH 100 is a very thin, unfilled epoxy resin, which can be used with different hardeners. Depending on the application the suitable hardener can be mixed with the resin AH 100. The fast hardener TGS is used for thin laminates and small-volume back fillings.

Lamitex® FR-4 EP GC 23 epoxy laminated sheet is reinforced with a woven glass fabric. It is primarily used for mechanical, electrical and electronic applications where extremely high mechanical strengths are required at room and moderate temperatures. Lamitex FR-4 meets or exceeds NEMA FR-4 and Mil-I-24768/27 specifications, has excellent resistance to chemicals and retains its' electrical properties in dry and high humidity environments.

Biresin® CR83 is an epoxy resin system with extremely low viscosity designed specifi cally for the infusion process for the production of high performance fiber reinforced composites parts and molds. The system has thermal properties up to 80°C. Biresin® CR83 epoxy resin has a low tendency to crystallize.

Continental Coatings 8700 Series Epoxy-Polyester Hybrid Power Coating are designed for applications where a combination of good mechanical properties is complimented by excellent chemical and corrosion resistance.

Ply-Guard MEA is a high solids, high build Mastic Epoxy Aluminum formulation that cures to a tough, flexible, abrasion resistant film. Ply-Guard MEA is self-priming and has excellent adhesion to rusted steel that has had proper power tool cleaning. It is easy to apply by spray, roller or brush. Ply-Guard MEA has high build characteristics allowing 18 mil WFT or more while providing high sag and run resistance. Ply-Guard MEA is an ideal product for improving and upgrading old and deteriorating coating systems.

GMS Composites EP – 290 is a nano-toughened epoxy resin matrix prepreg with long shelf life. The product has a versatile curing cycle from 100°C or as high as 150°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-290 is available in a range of substrates such as carbon, glass or aramid. This nano-toughened system has outstanding fracture properties and resistance to microcracking. The prepreg has good flow and is of medium tack.

DURAPATCH 3000D is an all purpose, quick cure epoxy paste kit. DURAPATCH 3000D is a unique, multi-component, novolac epoxy designed to quickly and permanently patch, seal and repair cracks, holes and leaks in metal, plastic, fiberglass and concrete surfaces. DURAPATCH 3000D cures in minutes, so down time is greatly reduced. DURAPATCH 3000D is perfect for machine shop and field use to repair and rebuild equipment. DURAPATCH 3000D is ideal for repairing warehouse floors, fixing leaks in tanks, repairing pool equipment and tiles, piping, electrical bushings, and setting keyways or taper fits for fast turnarounds. DURAPATCH is versatile, quick, easy to use, extremely strong and durable.

AEROMARINE PRODUCTS 300/11 Clear Potting And Encapsulation Epoxy Resin – 2 Quart Kit is a high performance epoxy adhesive used in the manufacture and repair of aircraft, boats, sporting goods, and industrial products. It bonds wood, metals, fiberglass, and most hard plastics. It is not recommended for use on polyethylene, polypropylene silicone, anodized metals, or Teflon. It is also widely used for electronic potting and encapsulation applications. It has a simple 1:1 mix ratio and is also used as a coating to provide a dielectric barrier.

SWANCOR 2559 is a high Tg hot-melt epoxy resin. The formula does not contain Diuron and volatile ingredients. It has the characteristics of light weight, excellent mechanical strength, heat resistance and corrosion resistance.

Eporit GE 45 is a Epoxy resin for high-wet strengt and alkali resistant paper coatings. Excellent crosslinker for carboxylated SB- and SA-dispersions. Improves water and alkali resistance of coated papers. Also used for bonding improvement in texile finishing and coating.

NM Laminering 650 is a two pack, solvent‐free, epoxy laminating system with a high TG and very high strength values. Wetting and adhesive properties are very good to all kind of fibers.

BJB Enterprises TC-1600-AB is an unfilled, low viscosity laminating epoxy resin for variety of fabricating applications. It features the ability to cure at room temperature for applications that do not require a working service temperature above 180°F (82 °C). When post cured at elevated temperatures, this system can provide service up to 300°F (149°C). TC-1600 is commonly used to reinforce fiberglass, Kevlar/aramid, and carbon fiber fabrics. It is also used as an adhesive for bonding wood, composites, and other substrates. Adding fillers like fumed silica, micro-spheres, and short-strand fibers can create pastes for filets, fairings, and bonding applications.

SE 146 is a difunctional epoxy acrylate oligomer with 25% TPGDA. This product is characterized by its low viscosity, fast cure response, high gloss, excellent solvent resistance and high surface hardness.

Hi- con 2000 caramel is a cellulosic paper epoxy (epoxide) resin.

GMS Composites EP – 285 is a toughened epoxy resin matrix prepreg with long shelf life. The product has a versatile curing cycle from as low as 80°C or as high as 150°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-285 is available in a range of substrates such as carbon, glass or aramid. This toughened system has outstanding fracture properties and resistance to microcracking. The prepreg has good flow and the tack of EP-285 can be varied.

AX-4270 is Structural Epoxy Aramid Prepreg.

The AMPARMOR® 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPARMOR® 2000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems.

UV Curable PlasticMetallic silver appearance

Polygem 307 Ceramic Tile Adhesive is our industry standard epoxy tile adhesive. The 307 is a thixotropic gel that can adhere tiles applied to vertical and overhead surfaces. The Polygem 307 Ceramic Tile Adhesive is formulated to provide for a tenacious bond to most ceramic, metal, concrete, fiberglass or wood surfaces. Polygem 307 Ceramic Tile Adhesive is moisture resistant and will even cure underwater.

EP GC 201 white is a glass cloth epoxy (epoxide) resin.

G-Etronax® EP 10 is the composite material that does it all. G-Etronax® EP 10 as an all-in-one material. This is because the carefully composed resins combined with the glass base result not only in exceptional resistance but also amazing electrotechnical properties, making G-Etronax® EP 10 suitable for countless applications.

PHOTOMER® 3318 is a high viscous modified epoxy di-acrylate with good flexibility and toughness in combination with good chemical resistance and fast cure performance.

GMS Composites EP – 620 prepreg is a special epoxy resin matrix system with long shelf life and high elongation. EP-620 is designed for composite applications requiring high energy absorption and impact resistance. The product has a versatile curing cycle from as low as 80°C or as high as 150°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-620 is available in a range of substrates such as carbon, aramid, s-glass, polyethylene or e-glass. The prepreg has good flow and the tack of EP-620 can be varied.

Ebalta LH 30 / Resin+Hardener is a two components epoxy laminating resin, precuring at room temperature and, depending on postcuring, can be used till 175°C. Since this laminating resin system contains no fillers, it has got good wetting properties and makes a high glass fabric content possible. This leads to a low coefficient of thermal expansion and high strength. Together with aluminum granules, ebalta LH 28-1 is suitable for back filling of heat resistant molds and molding tools.

Etronax® P EP is produced from a cotton base, thus obtaining outstanding mechanical properties, good durability and low friction. Etronax® P EP is also extremely suitable for machining, which makes it possible to produce just about any type of finished ready-to-install components using Etronax® P EP as the construction material.

Toray E745 is a 135°C (275°F) cure toughened epoxy component prepreg. E745 has been developed for impact structures and other mechanically demanding structural Applicationss. E745 can be impregnated into a range of fiber and fabric types. 135°C (275°F) Cure Mid Temperature Curing Toughened Epoxy Component Prepreg.

Polytec TC 430 is a two component, thermally conductive, electrically insulating epoxy. It is suggested for applications where heat dissipation and insulating properties are required. Polytec TC 430 has an excellent adhesion to ceramic, glass, semiconductor materials, ferrous and non ferrous metals and most plastics. The material can be applied via dispensing, screen printing, or manual application.

GMS Composites EP – 284 is a formulated epoxy resin matrix prepreg with long shelf life and improved handling. The product has a versatile curing cycle from as low as 80°C or as high as 150°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-284 is available in a range of substrates such as carbon, glass or aramid. The product also has good dynamic strength properties as well as outstanding hot-wet resistance. The improved handling allows for easier molding of complex parts. The prepreg has good flow and the tack of EP-284 can be varied.

AX-4112T is a High Performance, Toughened Epoxy Aramid Prepreg.

RAKU® TOOL EH-2945 is a spreadable and sculptable tool that is used in E84 Class A. Substrate dependent, E-84 Class A required anywhere, Molded Themed Castings, Scenery, Sculptures and Design Models.