Maintenance, Repair & Overhaul

Duslo

Dusantox® 86

Dusantox® 86 is Simple, almost non-staining antidegradant with antioxidant properties suitable for all types of rubber products. Dusantox® 86 is an unrefined dicumyldiphenylamine, 4-(1-methyl-1-phenylethyl)-N-[4-(1- methyl-1-phenylethyl)phenyl]aniline or 4,4'-bis(1,1-dimethylbenzyl)-diphenylamine.

Bernd Schwegmann

SCHWEGO® corrit 6831

Corrosion protection additive for water-based coating systems. SCHWEGO corrit 6831 is primarily a rust converting additive for water-based coatings. Typical applications are: Anticorrosive primers, One-coat anticorrosive systems, Maintenance finishes.

Lion Elastomers

Diene™ 55NF10

Diene™55NF10 is a solution polymerized rubber grade medium cis polybutadiene that contains a non-volatile antioxidant stabilizer system. This medium viscosity grade rubber is used in a variety of molded and extruded mechanical goods. Diene™55NF10 offers excellent resistance to abrasion, high resilience or rebound, low temperature flexibility, and good resistance to fatigue cracking and crack growth.

Lion Elastomers

Diene™ 55NF15

Diene™55NF15 is a solution polymerized rubber grade medium cis polybutadiene that contains a non-volatile and TNPP-free antioxidant stabilizer system. This medium viscosity grade rubber is used in a variety of molded and extruded mechanical goods. Diene™55NF15 offers excellent resistance to abrasion, high resilience or rebound, low temperature flexibility, and good resistance to fatigue cracking and crack growth.

JSR Corporation

Techno Polymer JSR 1805B

JSR 1805B is dynamic vulcanized TPO, and has high melt flow and good injection moldability, has excellent adhesion with cured rubbers, also has wide Range of hardness(20-80(DuroA)).

JSR Corporation

Techno Polymer JSR N280

JSR N280 is liquid product of medium high acrylonitrile.

JSR Corporation

Techno Polymer JSR RB830

JSR has developed this grade as the only supplier in the world. Applications are broad. For example, the vibration absorbing materials for automobile, films, tubes, rubber shoe soles, some injection molded products and plastic modifiers.

Bernd Schwegmann

KORRODUR™ AL 2

Corrosion protection additive for solvent borne coating systems. KORRODUR AL 2 is especially suitable for aluminum-pigmented systems, as its particular formulation prevents possible gassing in the drum. KORRODUR AL 2 is primarily a rust converting additive for solvent-based alkyd resin paints. KORRODUR AL 2 also has a good anticorrosive effect in solvent borne coating systems based on epoxy, chlorinated rubber or acrylic binders. Typical applications are:Anticorrosive primers, One-coat anticorrosive systems, Maintenance finishes.

Bernd Schwegmann

SCHWEGO® inhibitor 6818

Corrosion protection additive / passivasion for residual rust on steel. SCHWEGO inhibitor 6818 is used primarily undiluted as a pretreatment product against residual rust on iron and steel surfaces. SCHWEGO inhibitor 6818 is not a coating and therefore the treated surface must be protected by a suitable coating system. Types of paints and the number of coatings needed will be dertermined by the aggressiveness of the environment. SCHWEGO inhibitor 6818 is perfect for the restoration of all kinds of steel parts, for instance in the industrial sector, but also for machineries, vehicles and chemical-technical plant components. SCHWEGO inhibitor 6818 shows a very good solvent stability and is recoatable with must current coating systems. SCHWEGO inhibitor 6818 is also used as a rust converting additive for water-based coating systems. Typical applications are anticorrosive primers, one-coat anticorrosive systems and maintenance finishes.

Poly-Resyn

Suspeno 201-MS

SUSPENO 201-MS is a low viscosity agent for improving the brushability and leveling of architectural paints and maintenance coatings. It is an organic compound, specifically designed to provide rheological control for pigmented systems; improvement in brushing and leveling, pigment suspension and control of sagging.SUSPENO 201-MS is neutral, chemically non-reactive and does not require heat or activation. It is unaffected by the nature of the binder, oils, resins, varnishes or vehicles. It has no influence on gloss, color, color retention, drying time, flexibility, water and chemical resistance, adhesion or durability. Being moisture free, it will not cause rusting in containers and is safe for use with zinc dust.

JSR Corporation

Techno Polymer JSR N220SH

JSR N220SH is high mooney type N220S.

Duslo

Dusantox® 6PPD

Dusantox® 6PPD is the most widely used universal antidegradant for rubber products with excellent antiozonant properties and long-term protective effect.

Imperial Water-proofing Industries Pvt Ltd.

Rubaloy RA - 7360

Rubaloy RA - 7360 is a non-staining, oil, ozone, abrasion, weather and flex resistant polymer using medium Acrylonitrile Butadiene Rubber and a special grade of Poly Vinyl Chloride Resin. This grade has improved Tensile, Elongation, Compression Set, Swelling and Processability.

Merchem

Mertizer DBD 100 %

Mertizer DBD 100 % is 2,2` Dibenzamido Diphenyl Disulfide compound which is used as chemical peptiser in rubber industry.

Lion Elastomers

Diene™ 40NF15

Diene™40NF15 is a solution polymerized rubber grade medium cis polybutadiene that contains a non-volatile and TNPP-free antioxidant stabilizer system. This easy processing rubber is used in mechanical goods where flow and mixing are important. Diene™40NF15 offers excellent resistance to abrasion, high resilience or rebound, low temperature flexibility, and good resistance to fatigue cracking and crack growth.

Poly-Resyn

Suspeno 201-X

SUSPENO 201-X provides anti-settling, pigment suspension and sag control with no increase in apparent viscosity. SUSPENO 201-X is an organic compound that affects the rheology of fluid systems. Performance is achieved by highly efficient dispersions in pigmented coatings. Field experience shows marked improvement in brushing and leveling.SUSPENO 201-X is reliable and provides uniform performance, being neutral and is not dependent on activation by heat or chemicals. It is unaffected by the nature of the binder, oils, resins, varnishes or vehicles. SUSPENO 201-X has no effect on gloss, color, color retention, flexibility, cure time water and chemical resistance, adhesion or durability.

Lion Elastomers

Diene™ 45NF10

Diene™45NF10 is a solution polymerized rubber grade medium cis polybutadiene that contains a non-volatile antioxidant stabilizer system. This polymer is similar to Diene 55NF but at lower viscosity for easier processing. It is used in mechanical goods where flow and mixing are important. Diene™45NF10 offers excellent abrasion resistance, high rebound, low temperature flexibility, and good resistance to fatigue cracking and crack growth.

JSR Corporation

Techno Polymer JSR N237H

JSR N237H is sharp curing, low mold fouling and is heat resistance.

Performance additives

ULTRA-LUBE™ IMX

ULTRA-LUBE™ IMX is a highly effective internal lubricant and dispersing aid for specialty elastomers, like HNBR, XNBR, ECO and exotic polymers. ULTRA-LUBE™ IMX is a synergistic blend of primary amide and a highly thermal stable fatty acid derivative, thus shrinkage after post curing will not be affected. ULTRA-LUBE™ IMX improves mold and extrusion flow, prevents sticking on metallic surfaces and greatly enhances surface feel and finish of finished rubber articles.

JSR Corporation

Techno Polymer JSR 1703B

JSR 1703B is dynamic vulcanized TPO, and has high melt flow and good injection moldability, has excellent adhesion with cured rubbers, also has wide Range of hardness(20-80(DuroA)).

Merchem

Mercure AHB

Mercure AHB is special purpose amines accelerators which is used mainly in rubber industry.

JSR Corporation

Techno Polymer JSR N640

JSR N640 is Acrylate modified NBR.

JSR Corporation

Techno Polymer JSR 1504B

JSR 1504B is dynamic vulcanized TPO, and has high melt flow and good injection moldability, has excellent adhesion with cured rubbers, also has wide Range of hardness(20-80(DuroA)).

JSR Corporation

Techno Polymer JSR N241H

JSR N241H is high mooney type of N241.

Merchem

Mernox 6C

Mernox 6C is N (Cyclohexylthio) phthalimide compound which is used as retarders in rubber industry.

Merchem

Mercure MBT

Mercure MBT is semi ultra-fast accelerator / its combinations with booster accelerators are used in NR, SBR, NR-SBR/BR blends, NBR, IIR, EPDM and other synthetic rubber based compounds used for the manufacture of motor cycle and scooter tires, butyl tubes, cycle tires and tubes, beltings, retreading materials, footwear, hot air cured products, hoses, cables and miscellaneous molded and extruded rubber products.

Acmechem

Acmecure DPG

Acmecure DPG are seldom used alone as they give very slow vulcanization reaction. They are used as secondary accelerator(booster) for Mercapto & Sulphenamide accelerators in NR, NR/BR OR SBR/BR blend based compounds in tread or equivalent compounds. Acmecure DPG & Mercure Thiazole accelerators (MBT & MBTS) boost each other in an extraordinary manner with regard to the rate of cure & degree of crosslinking, their effect being synergistic. Hence this combination is preferred when goods are cured in hot air giving faster and excellent plateau. They have good mechanical properties and better resistance to aging. When alone, they give slow onset of cure therefore specially used for curing thick articles. In Latex foam these are used as secondary gelling agent.

Sylvin Technologies

Sylvin™ 83094-80UV Black

Sylvin™ 83094-80UV Black is a flexible vinyl compound formulated for outdoor weatherstripping applications. This compound contains a UV additive for improved outdoor weathering.

Merchem

Mercure MBTS

Mercure MBTS is semi ultra-fast accelerator / its combinations with booster accelerators are used in NR, SBR, SBR-NR / BR blends, NBR, IIR, EPDM, and other synthetic rubber based compounds used for the manufacture of motor cycles and scooter tires, butyl tubes, cycle tire and tubes, beltings, retreading materials, footwear, hot air cured products and miscellaneous molded and extruded products.

JSR Corporation

Techno Polymer JSR RB820

JSR has developed this grade as the only supplier in the world. Applications are broad. For example, the vibration absorbing materials for automobile, films, tubes, rubber shoe soles, some injection molded products and plastic modifiers.

Merchem

Mercure TMT

Mercure TMT is thiurams accelerators which is used mainly in rubber industry.

Merchem

Mernox SP

Mernox SP is N (1,3-dimethylbutyl)-N’ phenyl-p-phenylenediamine compound which is used as staining antidegradants in rubber industry.

Imperial Water-proofing Industries Pvt Ltd.

Rubaloy RA - L 7360

Rubaloy RA - L 7360 is a non-staining, oil, ozone, abrasion, weather and flex resistant polymer using low (28%) Acrylonitrile Butadiene Rubber and a special grade of Poly Vinyl Chloride Resin Blend which can easily withstand low temperatures of upto -45°C. This grade offers excellent rubber- to- metal bonding.

Acmechem

Acmetol 60

Acmetol 60 is a rubber soluble zinc soap resulting in faster physical peptization of natural rubber. Peptization action starts in the lower temperature range of compounding, which leads to shorter mixing cycles. It is suitable for mastication in a separate stage, as well as for single stage mixing.The shore hardness of the vulcanizates is not influenced. It being highly soluble in rubber, it does not bloom from the vulcanizates. Reduction of high dosages of stearic acid is necessary in this with Dosages 3 to 5 phr.

Otsuka Chemical

Otsuka Chemical ADVN

Otsuka Chemical ADVN is used at Low-temperature polymerization application. Technology in fabrics, resins, paints and adhesives is supported by catalyst chemistry in polymer chemistry. Otsuka Chemical contributes polymer industries by introducing variety of AZO type initiators in order to meet request from polymer industry with our technology.

Duslo

DUHOR® N-PL/S

Duhor® N-PL/S is a flame retardant and smoke suppressor. DUHOR® N-PL/S is surface untreated white powder of magnesium hydroxide with limited particle size distribution and specific morphological properties.