Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Formulations
Food & Nutrition Formulations
Formulations
Cosmetics & Personal Care Formulations
Industries
Agriculture & Feed
Product Families
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Plastics & Packaging
Cleaning Ingredients
CASE Ingredients
Products
Agrochemicals
Applications
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE Ingredients
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Industrial
Oil, Gas & Mining
Other Oil, Gas & Mining Applications
Products in Other Oil, Gas & Mining Applications: Resin
21 Products found in Other Oil, Gas & Mining Applications
Filters
Suppliers
Product Families
Functions
Chemical Family
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Evonik
VESTAMID® NRG 2101 YE
Polymer Name:
Polyamide 12 (PA 12)
Chemical Family:
Polyamides
Additives Included:
UV Stabilizer, Heat Stabilizer, Light Stabilizer
Processing Methods:
Injection Molding, Pipe Extrusion, Profile Extrusion, Tubing Extrusion, Extrusion
Materials Features:
Excellent Toughness, Good Weather Stability, Hydrocarbon Resistant, Good Impact Strength, Heat Stabilized, Cost Effective, High Performance, Unreinforced, Corrosion Resistant, UV Stabilized, High Melt Strength, Hydrolysis Resistant, Good Aging Behavior, Chemical Resistant, Good Environmental Stress Crack Resistance (ESCR), Good Thermal Stability, High Viscosity, Fatigue Resistant, Crack Resistant, UV Resistant, Hot Water Resistant, Weldable, Fuel Resistant, Very Good Heat Resistance, High Molecular Weight, Semi Crystalline, Grease Resistant, Ozone Resistant, Light Stabilized, Good Light Stability, Oil Resistant, Durable, Electrically Insulating, Solvent Resistant
Color:
Yellow
VESTAMID® NRG 2101 YE is a high-molecular-grade PA-12 material developed by Evonik. It is designed for use in thermoplastic piping systems at higher operating pressures and larger diameters, replacing metallic piping systems in a safe and cost-effective manner. It offers superior performance characteristics.
Evonik
VESTAMID® NRG 2901 BK
Polymer Name:
Polyamide 12 (PA 12)
Chemical Family:
Polyamides
Additives Included:
Heat Stabilizer, Nucleating Agent
Processing Methods:
Injection Molding, Pipe Extrusion, Tubing Extrusion, Extrusion
Materials Features:
Good Weather Stability, Low Shrinkage, Good Impact Strength, Heat Stabilized, High Performance, Unreinforced, Good Abrasion Resistance, Excellent Mold Release, Hydrolysis Resistant, Low Moisture Absorption, Chemical Resistant, Nucleated, Good Thermal Stability, High Viscosity, UV Resistant, Hot Water Resistant, Fuel Resistant, Very Good Heat Resistance, Semi Crystalline, Good Light Stability, Oil Resistant, Low Coefficient of Friction, Low Friction, Shorter Cycle Time
Color:
Black
VESTAMID® NRG 2901 BK is a high-viscosity, heat-stabilized compound with exceptional mold release properties. It is nucleated to reduce cycle time and shrinkage of molded parts. It is commonly used for gas pipes and fittings, with a proven record of safe and reliable performance in demanding applications, including fuel lines in passenger cars, air brake tubing in trucks, and offshore applications.
Evonik
VESTAMID® NRG 5901 BK
Polymer Name:
Polyamide 12 (PA 12)
Chemical Family:
Polyamides
Additives Included:
UV Stabilizer
Processing Methods:
Injection Molding, Pipe Extrusion, Profile Extrusion, Tubing Extrusion, Extrusion
Materials Features:
Excellent Toughness, Good Weather Stability, Hydrocarbon Resistant, Abrasion Resistant, High Temperature Application, Good Barrier Properties, Cost Effective, High Performance, Unreinforced, Corrosion Resistant, High Pressure Applications, UV Stabilized, Light Weight, Hydrolysis Resistant, Chemical Resistant, Good UV Resistance, Outdoor Durability, Good Thermal Stability, High Viscosity, Fatigue Resistant, Crack Resistant, UV Resistant, Hot Water Resistant, Weldable, Fuel Resistant, High Molecular Weight, Good Light Stability, Oil Resistant, Durable, Wear Resistant, Low Coefficient of Friction
Color:
Black
VESTAMID® NRG 5901 BK is a high-molecular-weight PA-12 material developed by Evonik. This exceptional material offers superior performance characteristics, making it an ideal choice for expanding the use of thermoplastic piping systems. With its ability to handle higher operating pressures and larger diameters, VESTAMID® NRG 5901 BK provides a safe and cost-effective alternative to metallic piping systems. In addition to extending the operating pressure limits of thermoplastic piping systems, it offers numerous benefits and, in many cases, outperforms conventional PE piping systems. Experience the reliability, durability, and enhanced performance of VESTAMID® NRG 5901 BK in your piping applications. Choose VESTAMID® NRG 5901 BK for its superior properties and cost-effective solution, ensuring the safe and efficient operation of your thermoplastic piping systems.
Mitsubishi Chemical Group Corporation
Ketron® Sterra™ CA30 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Fillers Included:
Carbon Fiber
Color:
Brown, Grey
Physical Form:
Rods, Bars, Plates
Ketron® Sterra™ CA30 PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance than Ketron GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® Sterra™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Ketron® Sterra™ HPV PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Additives Included:
Lubricant (PTFE), Lubricant (Graphite)
Fillers Included:
Carbon Fiber
Color:
Black
Physical Form:
Plates
Ketron® Sterra™ HPV PEEK shapes are carbon fiber reinforced with graphite and PTFE lubricants. This gives them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron® Sterra™ HPV PEEK’s combination of low wear, low friction, and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves, and seals. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Ketron® Sterra™ 1000 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Color:
Grey
Physical Form:
Rods, Bars, Plates
Ketron® Sterra™ 1000 PEEK is an unfilled, general-purpose grade known for its exceptional elongation and toughness. It is ideal for instrument and seal components, where ductility and inertness are crucial. Ketron® Sterra™ 1000 PEEK portfolio, featuring recycled content for a reduced carbon footprint compared to non-recycled materials.
Moharamplast
Moharamplast HDPE –MP5020-100 (Orange)
Polymer Name:
High Density Polyethylene (HDPE)
Processing Methods:
Extrusion
Moharamplast HDPE –MP5020-100 (Orange) is a thermally stabilized bimodal high molecular weight high density polyethylene, classified as PE100 – hexane copolymer. Long term stability is ensured by an optimized stabilization system. It is intended for use in PE-100 pipe applications,where the highest standard for long term hydrostatic strength and resistant for slow and rapid crack growth are desired. Recommended for pipe systems in the applications field of natural gas distribution pipes and drinking water pipes.
Moharamplast
Moharamplast HDPE MP6020-100 (BLACK)
Polymer Name:
High Density Polyethylene (HDPE)
Processing Methods:
Extrusion
Moharamplast HDPE MP6020-100 (BLACK) is a bimodel molecular structure compound classified as PE100. It is a black high density polyethylene compound.It has high tensile strength and excellent resistance against fast and slow crack propagation. It also shows very high impact resistance throughout its entire temperature range combined with an acute resistance to fracture.
AFT Fluorotec
AF801 PEEK™ 450g
Polymer Name:
Polyetheretherketone (PEEK)
AF801 Peek™ 450G are used in a wide range of oil and gas applications due to the unique combination of properties and range of compounds and unfilled polymers.
Fluorocarbon Company
FLUORONOID® FL 105
Polymer Name:
Polytetrafluoroethylene (PTFE)
Fillers Included:
Glass Fiber
FLUORONOID® FL 105 is a glass fiber filled PTFE. This material may be inert gas sintered to further improve creep properties and reduce porosity and gas permeability. There will be a consequent loss of tensile properties.
Fluorocarbon Company
FLUORONOID® FL 355
Polymer Name:
Polyetheretherketone (PEEK)
FLUORONOID® FL 355 is a lubricated filled PEK
Fluorocarbon Company
FLUORONOID® FL 106
Polymer Name:
Polytetrafluoroethylene (PTFE)
Fillers Included:
Bronze, Molybdenum Disulfide
FLUORONOID® FL 106 is a Bronze and molybdenum disulphide filled PTFE.
Fluorocarbon Company
FLUORONOID® FL 103
Polymer Name:
Polytetrafluoroethylene (PTFE)
Fillers Included:
Glass Fiber
FLUORONOID® FL 103 is a glass fiber filled PTFE. This material may be inert gas sintered to further improve creep properties and reduce porosity and gas permeability. There will be a consequent loss of tensile properties.
Moharamplast
Moharamplast HDPE- MP6050- 80 (Black)
Polymer Name:
High Density Polyethylene (HDPE)
Processing Methods:
Extrusion
Moharamplast HDPE- MP6050- 80 (Black) is a black, bimodal, hexene high density polyethylene classified as PE80 material (MRS 8.0), with an optimum balance between flexibility and strength, with excellent carbon black dispersion which gives UV resistance.Produced with advanced gas phase PE process. Long –term stability is ensured by an optimized stabilization system. HDPE-MP5535-80 is recommended for pressure pipe systems in the applications field of drinking water, natural gas, pressure sewerage, relining, sea outfall and industrial, where flexibility and coil ability is of importance. It also shows excellent resistance to rapid crack propagation and slow crack growth, and the structure gives outstanding extrudability. The combination between high mechanical properties, excellent long term performance and sagging performance makes it the ideal pressure pipe material.
Dixon Resine
Valflon® F 110
Polymer Name:
Polytetrafluoroethylene (PTFE)
Valflon® F 110 are among the best solutions offered on the market today to solve tribological applications where the most critical operating conditions are present. The ability to operate completely dry makes Valflon F 110 the most appropriate answer for applications where lubricating moving parts can be a difficult problem (due to inaccessibility, extreme temperatures, chemical corrosion or the risk of contaminating other products such as food or drugs) .
Guangzhou Lushan New Materials
Guangzhou Lushan New Materials DP-1
Functions:
Surface Finish, Resin, Adhesion Promoter
Chemical Family:
Polypropylenes (PP), Polyolefins
End Uses:
Pipes, Oil/Gas Applications
Guangzhou Lushan New Materials DP-1 has good stability, wide processing technology, strong adhesion with the outer PP layer, high mechanical strength and aging resistance property, etc.
Fluorseals
fluteck™ C200
Polymer Name:
Ethylene Chlorotrifluoroethylene Copolymer
Flexural Modulus:
1500.0 - 1500.0 MPa
fluteck™ C200 PCTFE is a high performance thermoplastic fluoropolymer based on Polychlorotrifluoroethylene
Fluorocarbon Company
FLUORONOID® FL 115
Polymer Name:
Polytetrafluoroethylene (PTFE)
Fillers Included:
Carbon Fiber
FLUORONOID® FL 115 is a Carbon filled PTFE. Carbon filler gives good compression and wear resistance, good thermal conductivity and low permeability.
Dixon Resine
Valflon® F 391
Polymer Name:
Polytetrafluoroethylene (PTFE)
VALFLON® F 391 is a PTFE-based formulation that is particularly suitable for the manufacture of a wide range of component parts, such as valve seats and balls, packed sealing elements (V-rings), bushings and washers. It can also be produced in tapes of different widths and thicknesses for the coating of sliding surfaces and finishing of cooking tops. VALFLON® F 391 features excellent workability and is economically advantageous in the manufacture of parts machined on automatic lathes by large quantities.
Fluorocarbon Company
FLUORONOID® FL 101
Polymer Name:
Polytetrafluoroethylene (PTFE)
Fillers Included:
Glass Fiber
FLUORONOID® FL 101 is a glass fiber filled PTFE. This material may be inert gas sintered to further improve creep properties and reduce porosity and gas permeability. There will be a consequent loss of tensile properties.
Fluorseals
fluteck™ F100
Polymer Name:
Perfluoroalkoxy Polymer (PFA)
fluteck™ F100 PFA is a thermoplastic fluoropolymer based on perfluoroalkoxy resin (PFA).