Products in Other Oil, Gas & Mining Applications

AIRONIL 200 NEW is EBSA in Paraffinic Oil/Surfactant Blend. Defoamers fit into all major chemical markets and meet a wide variety of application needs. We manufacture the base ingredients that make up these defoamers, which allow us to be very low cost producer.

BNX 1010 (6683-19-8)is a high molecular weight hindered phenolic antioxidant that provides excellent processing and long term thermal stability in a wide variety of organic substrates such as plastics, synthetic fibers, elastomers, adhesives, waxes, oils, and fats.

Pacer Minerals LCM-Coarse is optimal for sealing larger openings in the borehole.

Zeolita Natural ZN AQUA® 0.5-1 mm is our finest particle size for optimum performance in swimming pool filters, water potabilization and industrial water treatment. Also ideal for fish farms and prawn/shrimp farms to control ammonia levels. High performance filter medium for biodiesel, solvent recovery and organic liquids. It is a natural Zeolite, Clinoptilolite type, dried at 350°C, milled and sieved.

Essentium PEEK is the highest performance material in our broad material portfolio. In addition to best-in-class printability, it has excellent thermal and chemical resistance. Essentium PEEK boasts outstanding strength, stiffness, and impact properties and is inherently flame resistant.

Perlast® ICE G75LT offers a unique combination of excellent chemical resistance and low temperature performance. This perflouroelastomer material has been specifically developed to perform under extreme conditions, in temperatures as low as -46°C (-51°F).Perlast® ICE G75LT has been formulated to provide increased resistance to a broad range of chemicals by carefully controlling the molecular architecture. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in-service performance in valves, pumps and mechanical seals.Ideal for use in exploration and completion applications and equipment operating or stored in sub-zero conditions. Perlast® ICE G75LT is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2.5m/8ft internal diameter) and custom shapes.Key Attributes Excellent low-temperature sealing capability Good high temperature resistance Low compression set Excellent chemical resistance to a broad range of chemicals Exceptional acid and amine resistance Good mechanical properties Typical Applications Aerospace - static O-rings Chemical processing - pumps & valves Mechanical seals Downstream refinery & petrochem equipment Cryogenic equipment Gas storage & transportation Oil & Gas - subsea equipment Completion tools Drilling tools (deepwater) Pipe connectors Pumps, valves & compressors

DEHA 85 is an agent preventing fouling of columns by polymers in distillation systems of monomers (styrene, butadiene). Developer in color and x-ray photography. Color stabilizing product in fuels during storage. Antioxidant for PVC and silicones.

Shanghai Tengmin Industry Barium SulfateTM3000 is a white to fine powder, odorless and tasteless. Decomposes above 1600 ℃. Soluble in hot concentrated sulfuric acid, almost insoluble in water, ethanol and dilute acid. Barium sulfate has plate-like crystals, complete cleavage with close angle intersections, specific gravity 4.0-4.6 , foaming when exposed to hydrochloric acid cloth, strong chemical inertness, and good stability. Good barium sulfate has high reflectivity and can absorb harmful rays. , Is a kind of material with environmental protection function.

FAIRPRENE®FG-1425 is Fluoroelastomer (fluorocarbon-based synthetic polymer such as 3M™ Dyneon™, Daikin DAI-EL™ and Solvay Tecnoflon®) coated Nomex® for flat cut diaphragm type applications. The combination of a fluoroelastomer coating and high temperature textile produces a coated fabric with good temperature and chemical resistance in harsh environments.

Kyflon™ 3073 combines excellent low temperature performance with broad chemical resistance.

Liquid Casing® Fine is a microcrystalline product processed to produce a seepage and loss circulation material that can be used in both water and oil-based muds. The key feature of this product is the wide range of particle sizes it offers, ranging from 1-500 microns with a median size of 60-170 microns. The particle size variety ensures that all fractures or pore throats are sealed so the product can move through any configuration of drilling or coring string. It can be added to the mud or completion brine and can be used in the circulating system.

66% Fluorine copolymers formulated for the ultimate in compression resistance. SP compounds are the best choice for O-rings.

FLUORONOID® FL 106 is a Bronze and molybdenum disulphide filled PTFE.

Valve Lubricant 601™ is a specially formulated valve lubricant based on a fully synthetic oil and incorporating an advanced corrosion inhibition system and an inorganic thickener.

Hangzhou Wanjing New Material nano-zno-zinc-oxide-nanopowder-nanoparticles VK-J50 has excellent property of anti-UV,anti-bacterial,is widely used in the field of coating, ink, painting, plastic to improve their brightness, mechanism strength, heat-resistance, anti-aging, wear-resistance.

TG-12-T is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

R-E-D Fume Oil & Gas - 104 OG is used to make high performance concrete in the oil and gas fields. It provides better flow for easier application, decreases permeability by increasing the resistance to ion penetration and potential gas migration, provides greater enhancement in compressive and flexural strengths, durability, modulus of elasticity, and pore structure, reduces viscosity and the set time of cement based materials.

NEXA® PFX 8090 used for ultra low temperature application. It has excellent Thermal Stability and Chemical Resistance, Anti Explosive Decompression. It is also used in Oil and Gas Applications. PFX 8090 is especially suited for petrochemical and oil&gas applications (AED – Anti Explosive Decompression approved).

AIRONIL 2721 is EBSA /Silica in Paraffinic Oil/Surfactant Blend. Defoamers fit into all major chemical markets and meet a wide variety of application needs. We manufacture the base ingredients that make up these defoamers, which allow us to be very low cost producer.

Inhance Fluoro-Seal UH-1035 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

66% Fluorine copolymers formulated for the ultimate in compression resistance. SP compounds are the best choice for O-rings.

DEFOAMER 5729 is Predominantly Silica and a small amount of EBSA and dispersant in napthenic oil. Defoamers fit into all major chemical markets and meet a wide variety of application needs. We manufacture the base ingredients that make up these defoamers, which allow us to be very low cost producer.

Apex Industrial Chemicals Rustex C RR10 is a safe, organic-based product for the removal of rust, corrosion deposits and incidental scales from a wide variety of surfaces, including carbon steels, stainless steels and thermoplastics.

Seals Eastern Compound 7075 is 68-duro EPDM.

PRP® Powder is for hydrocarbon spill clean up on oil, fuel and other liquid petroleums. PRP® Powder is especially well adapted for land, water and hard surface petroleum spills in areas such as industrial plant settings (such as cooling ponds and tanks), shorelines – whether rocky or sandy – marinas, railroad tracks, oil wells/oil fields, maintenance facilities, truck roll-overs, and marshes/wetlands remediation where PRP® can mitigate the collateral damage to the ecosystem caused by clean up crews.

Michael Day Enterprises AH50 is a 9 melt flow acetal homopolymer.

Luvocom® 3F PEEK CF 9676 BK Filament is a 15% carbon reinforced PEEK (Polyether Ether Ketone) with extraordinary characteristics in terms of mechanical, thermal and chemical resistance. PEEK with carbon is used in demanding industries like oil and gas, automotive, mechanical engineering, aircraft and aerospace technologies. This particular high performance polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts.

Moharamplast HDPE- MP6050- 80 (Black) is a black, bimodal, hexene high density polyethylene classified as PE80 material (MRS 8.0), with an optimum balance between flexibility and strength, with excellent carbon black dispersion which gives UV resistance.Produced with advanced gas phase PE process. Long –term stability is ensured by an optimized stabilization system. HDPE-MP5535-80 is recommended for pressure pipe systems in the applications field of drinking water, natural gas, pressure sewerage, relining, sea outfall and industrial, where flexibility and coil ability is of importance. It also shows excellent resistance to rapid crack propagation and slow crack growth, and the structure gives outstanding extrudability. The combination between high mechanical properties, excellent long term performance and sagging performance makes it the ideal pressure pipe material.

Revol HTS Valve Lubricant is a synthetic non-melting product.

HY60 is a csm rubber sheet.

70% Fluorine terpolymers formulated for much improved chemical resistance. HF compounds are excellent choices for fuel applications, including methanol containing fuels.

APChem CWF-311 is a blend of different, complex, alcohol ether sulfates that is effective in fresh or hard water, saturated brines, and in the presence of oil up to 177°C.

ANTIFOAM 10 FG is Silicone Emulsion Defoamers. Defoamers fit into all major chemical markets and meet a wide variety of application needs. We manufacture the base ingredients that make up these defoamers, which allow us to be very low cost producer.

RS Clare & Co Ltd Open Gear 2000 NLG 2 is a high-performance grease for mining and quarrying applications.

DEHA ANHYDROUS is an agent preventing fouling of columns by polymers in distillation systems of monomers (styrene, butadiene). Developer in color and x-ray photography. Color stabilizing product in fuels during storage. Antioxidant for PVC and silicones.