Products in Other Oil, Gas & Mining Applications

E Glass fabrics 120 is a balanced plain weave fabric.

ANTIFOAM 3 is Silicone Emulsion Defoamers. Defoamers fit into all major chemical markets and meet a wide variety of application needs. We manufacture the base ingredients that make up these defoamers, which allow us to be very low cost producer.

Michael Day Enterprises N6050T (HS) (L) is a impact modified nylon 6.

SX-04-P is a Basalt Fiber which has a chemical composition similar to glass, but what truly distinguishes it from glass is it’s high-melting point, allowing it to be exposed to high temperatures for extended periods of time.

Nanjing HBL International Tri-isobutyl phosphate is widely used in printing and dyeing, ink, building, oilfield and other fields as defoaming agent and penetrant. It has common features of ester, and it hydrolyzes under alkaline conditions. Log Koc of octanol/moisture distribution coefficient is 3.7. It is poorly soluble in water, soluble in many organic solvents such as alcohol and ether.

66% Fluorine copolymers formulated for the ultimate in compression resistance. SP compounds are the best choice for O-rings.

Beaverloc® 304 is specially formulated treated fibers for butyl rubber adhesion in automotive A/C.

Thermaguard™ SAL 600 is a high temperature resistant siloxane aluminum, single component, ambient curing, coating which is designed to provide corrosion protection throughout a range of temperatures from -196 to 600oC. Formulated coating to provide corrosion protection to steel equipment which is exterior exposed and operating at elevated or cryogenic temperatures. Designed to withstand thermal cycling throughout its operating range while maintaining corrosion protection to steel substrates.

Michael Day Enterprises TPV 55A is a shore A 55 thermoplastic vulcanizate.

Da/Pro Rubber Neoprene/Chloroprene is a brand name developed by DuPont Performance Elastomers. It is a name for a family of synthetic rubbers based on polychloroprene. DuPont developed this family of rubbers as an oil-resistant alternative to natural rubber.Because of these properties, neoprene rubber is useful in a variety of applications. Neoprene rubber gaskets and neoprene grommets are used in devices that are exposed to extreme chemicals and temperatures. Neoprene gaskets are often used in automotive and oil & gas industry as a seal against corrosive environments and weather elements. Neoprene grommets are used in electrical connectors in the aerospace and electronic industries. Neoprene rubber has become a popular material choice in modern applications ranging from clothing to electronic cases.

Polikim Kestamid®(PA6G-Cast Nylon) is one of the most commonly used engineering plastics.

PTM&W Industries, Inc ES6259 is a versatile epoxy adhesive that provides very good bond strengths to many substrates under a variety of exposure conditions. ES6259 cures to a tough, slightly resilient product, which makes it ideal for bonding dissimilar materials. ES6259 is also an excellent candidate for applications that are exposed to high humidity and water immersion, due to its resistance to brine and fresh water alike.

Z73B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.HNBR materials typically provide superior heat resistance, excellent mechanical properties, combined with exceptional resistance to oils, hydrogen sulfide, amines present in crude oil, high energy radiation, ozone and weathering.Z73B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 2 (NES 337) for use on naval ships and submarines.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent chemical resistance Excellent wear resistance and mechanical properties Accepted by M.O.D. to Def. Stan. NES 337 Meets ASTM D2000/SAE J200 line call-out M4DH716, A26, B36, EO16, EO36, F17. Typical Applications Naval ships and submarines Oilfield applications

FLUORONOID® FL 101 is a glass fiber filled PTFE. This material may be inert gas sintered to further improve creep properties and reduce porosity and gas permeability. There will be a consequent loss of tensile properties.

VALFLON® F 391 is a PTFE-based formulation that is particularly suitable for the manufacture of a wide range of component parts, such as valve seats and balls, packed sealing elements (V-rings), bushings and washers. It can also be produced in tapes of different widths and thicknesses for the coating of sliding surfaces and finishing of cooking tops. VALFLON® F 391 features excellent workability and is economically advantageous in the manufacture of parts machined on automatic lathes by large quantities.

Michael Day Enterprises TPV 85A is a shore A 85 thermoplastic vulcanizate.

Hempadur Avantguard 550 is an activated, zinc epoxy primer in compliance with the requirements of Level 3, type II in SSPC Paint- 20, 2019. Hempadur Avantguard 550 functions as a zinc-rich epoxy featuring a higher mechanical strength. The product is in full compliance with ASTM D520 type II and EU Directive 2004/42/EC, the Paints Directive on the limitation of volatile organic compounds: subcategory j.

Nanjing HBL International Diisopropanolamine 99% is a chemical compound with the molecular formula used as an emulsifier, stabilizer, and chemical intermediate.Diisopropanolamine can be prepared by the reaction of isopropanolamine or ammonia with propylene oxide.

SC-07-T is a Carbon Fiber which is widely used fiber in high-performance applications, offering an astonishing range of properties.

ORG CHEM Group Sulfolane - 99 is an organic solvent predominantly used as an extraction solvent for BTX or aromatic removal from hydrocarbon feed streams but is also used in sour gas sweetening, (i.e., removal of acid gasses from a natural gas stream). Due to its combination of physical and chemical properties, Sulfolane® has been used in a variety of new applications including as an extraction distillation solvent, polymer solvent, polymer plasticizer, polymerization solvent, and in electronic/electrical applications and dyestuff intermediates.

Luvocom® 3F PPS CF 9938 BK Filament is a Polyphenylene sulfide, linear with 15% added carbon fibers, and is known for it's heat and chemical resistance. Below 200 °C the material doesn't dissolve in any solvent. This particular high performance polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts. The filament can be used on conventional FFF / FDM 3D printing systems due to the enhanced printability, improved layer bonding and the unrequired use of a heated chamber.

Duralar® ArmorLube™ coating provides a unique combination of dry lubrication and exceptional hardness. Its carbon content provides a natural graphitic lubricity and an extremely low coefficient of friction. ArmorLube coating is well suited for applications that require a clean, dry, permanent lubrication without oils or greases, which can accumulate dirt and cause fouling.

SPI’s patented PTU™ 100% pure polyurea is a new generation of high-performance polyurea coating and is the resultof six years of development and field testing. This chemical resistant coating provides high-ductility, allowing itto move with expanding and contracting surfaces. PTU™ can be sprayed to any thickness in one application andreturned to service in a matter of hours.

Tovo Gomma CSM 5502 65 GRIGIA is a rubber compound which has the trade name chlorosulfonated sheet Gray 65 SHA.

E Glass fabrics 2116 is a balanced plain weave fabric.

Beijing Mayor Chemical HY-2046 is suitable for elastic coating, waterproof coatings, mastics, cement, paper making, textile dyes, oil drilling, adhesives and wastewater treatment.

Paracril BJLTM30 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Michael Day Enterprises TPV 45A is a shore A 45 thermoplastic vulcanizate.

Shanghai Tengmin Industry Barium Sulfate H20 is a white to fine powder, odorless and tasteless. Decomposes above 1600 ℃. Soluble in hot concentrated sulfuric acid, almost insoluble in water, ethanol and dilute acid. Barium sulfate has plate-like crystals, complete cleavage with close angle intersections, specific gravity 4.0-4.6 , foaming when exposed to hydrochloric acid cloth, strong chemical inertness, and good stability. Good barium sulfate has high reflectivity and can absorb harmful rays. , Is a kind of material with environmental protection function.

66% Fluorine copolymers formulated for the ultimate in compression resistance. SP compounds are the best choice for O-rings.

Beaverloc® 102 is a treated fibers designed for adhesion to EPDM, CPE & CSM.

70% Fluorine terpolymers formulated for much improved chemical resistance. HF compounds are excellent choices for fuel applications, including methanol containing fuels.

fluteck™ F100 PFA is a thermoplastic fluoropolymer based on perfluoroalkoxy resin (PFA).

ACMO™ (Acryloyl morpholine) is a monomer compatible with water and organic solvents whereas ACMOTM homopolymer is insoluble in water and organic solvents.

70% Fluorine terpolymers formulated for much improved chemical resistance. HF compounds are excellent choices for fuel applications, including methanol containing fuels.