Suppliers in Other Oil, Gas & Mining Applications

99 Suppliers found in Other Oil, Gas & Mining Applications

  • Fast Response Times
    Brueggemann banner
    Knowde company logo
    Brueggemann
    • Brands:2
    • Products:31
    • HQ:Germany

    We like niches, as this is precisely where we can best develop ourselves and the poten­tial of our products. We are the partner for custom-tailored chem­ical solu­tions. We’re always very close to our customers and the major changes in the indus­tries of the future. We provide the crucial connec­tion across many areas of applic­a­tion – and we have been doing this for more than 150 years. Chem­istry is every­where in our world and it is anchored in the things we need daily. We offer a broad range of high-perform­ance chem­ical products for a better daily life, for mega-trends, and future tech­no­lo­gies. We optimize our products with our own research and think ahead for the benefit of our customers. We analyze and test them in our labor­at­ories and fine-tune them in our own Applic­a­tion Tech­no­logy organ­iz­a­tion, and finally we synthesize and blend them in our produc­tion facility at our Heil­bronn site. Short paths, empathy, and inex­haust­ible innov­ative power are our distin­guishing char­ac­ter­istics. At Bruegge­mann, quality and quality assur­ance are more than a promise – they are our passion. Natur­ally we seek and find the niche not only at our histor­ical loca­tion in Heil­bronn. We are family busi­ness that focuses on continuity but also dynamics, and that builds strong roots and world­wide distri­bu­tion networks. Loca­tions in Germany, the USA, and Hong Kong also assure our success at this.

    Elogio AM banner
    Knowde company logo
    Elogio AM
    • Brands:2
    • Products:20
    • HQ:
    "At the beginning of 2014 , father and son Wille started building their own filament extruder. They decided to do this because of the growing interest in 3D printing technology, the knowledge of plastic within the company and the company network. 3D4Makers is the result from a company that primarily dealt with selling plastic raw materials. Now the 3D4Makers team consists of five members, each with their own specialties. While building the filament extruder and testing it we found out that moisture in the filament can cause problems while printing. Moisture in the filament could also lower the quality of the printing product. 3D4Makers took this problem into account while building the filament extruder. Normally a filament extruder uses a several meters long waterbed to cool the filament. During this process the filament absorbs water. 3D4Makers chose not to use this cooling technique which means that the filament does not come into contact with water during the production process. On top of that the filament is directly packaged in a vacuum packaging after the production process. This production process makes the 3D4Makers filament particularly suitable for FDM and FFF 3D printers. The material has an excellent adhesion between the layers. This results in great improvement of the impact resistance, strength, durability, the printing process and “warping”. The 3D4Makers filament comes with a product information folder that contains technical information, printer settings, storage information and safety information. Basically everything you need to know."
    PAR Group banner
    Knowde company logo
    PAR Group
    • Brands:4
    • Products:20
    • HQ:
    "PAR Group operate two UK divisions and have over 30 years experience serving clients in the UK, Europe and Worldwide. We have our own rubber molding, converting, CNC machining and fabrication facilities. This gives us the capability to manufacture moldings, extrusions, gaskets and precision engineered components. We also have the facilities to engineer and fabricate plastics including CNC, routers, grinders, millers, turners, formers and polishers. We have in house welding facilities and manufacture a range of sleeves and connectors using coated fabrics and abrasive resistant films. We also supply high temperature insulation materials and health and safety products including pvc door curtain, foam protection profiles and GRP anti-slip floorings. We stock hose and ducting and can manufacture hose assemblies using our extensive range of couplings and clamps. PAR Group serve a wide range of industries including: food, drink and pharmaceutical, water treatment, chemical, brewing, mining and quarrying, aerospace, brick manufacture, packaging, textiles and distribution. Our customers range from multinational blue chip organizations through to sole traders, with every customer receiving the very highest care and attention from our dedicated sales staff. All systems conform to recognized quality standards. We strive for excellence in our service and quality. With vast experience in rubber and plastics engineering, we are renowned for our ability to provide solutions to unusual and difficult applications. This is achieved whilst operating a stringent quality control program."
    AFT Fluorotec banner
    Knowde company logo
    AFT Fluorotec
    • Brands:1
    • Products:13
    • HQ:
    "AFT Fluorotec Ltd is a group of companies based in England around the outskirts of London in Welwyn Garden City, Hertford and Kent. When we began, our collective ambition was to be a flexible customer-driven company, capable of giving clients exactly what they needed and not be limited to supply from a rigid product portfolio offering inflexible lead times. More than a decade later we have grown from the '3 guys in a shed' and developed into a team of 100 dedicated individuals, each bringing their own strengths, skills and experience and each fully understanding the fundamental importance of that original ambition to the success not just our business, but our customers as well. Listening to our customers remains core to our approach whether that be identifying and rectifying a frustration or developing a new manufacturing process to support our customers' ambitions, our goal remains the same – To supply customers exactly what they require when they need it and back this up with commercial competitiveness and an ISO approved quality system. Whilst our company beginnings were focused around PTFE and fluoropolymer molded and machined parts, the demand for other plastics and PTFE and associated coatings from our customer base pushed our investment and development of these additional areas. We are strong believers in reinvestment, evident in our facilities and plant which are the newest and most advanced within the UK Fluoropolymer processing and plastic machining industries. We have no ideal size shape or quantity. Our resource is so broad and varied we can handle all shapes, sizes and quantities of product."

    Show

    of 99 results