Products in Other Industrial Applications: Abrasion Resistant

TIVAR® Sterra™ UHMW-PE shapes are produced from reprocessed industrial UHMW materials and repurposed for use in a variety of industries, such as construction and heavy equipment, agriculture and grain handling, bulk material and parcel handling, automotive, and transportation. As a premium grade that is both economical and eco-friendly, TIVAR® Sterra™ UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption, and a low coefficient of friction. For these reasons, TIVAR® Sterra™ UHMW-PE is often a favored solution for wear and outrigger pads, strips, rails, and guides, rollers, conveyors, chutes, hoppers, impact plates, and asphalt equipment components. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

TIVAR® Sterra™ DrySlide UHMW-PE is an internally lubricated product. This lubricant is built into the PE-UHMW matrix with a higher molecular weight. It offers a lower coefficient of friction and enhanced wear and abrasion resistance than TIVAR® 1000 PE-UHMW. The additives used also make this material static dissipative and considerably improves UV-resistance. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Ketron® Sterra™ CA30 PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance than Ketron GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® Sterra™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

TIVAR® Sterra™ ESD UHMW-PE are electrostatic dissipative shapes produced from reprocessed industrial UHMW materials and repurposed for use in a variety of industries, such as agriculture and grain handling, bulk material handling, and parcel handling. As a premium grade that is both economical and eco-friendly, TIVAR® Sterra™ ESD UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption, and a low coefficient of friction. For these reasons, TIVAR® Sterra™ ESD UHMW-PE is often a favored solution for conveyor, chute, and hopper applications, where electrical charge build-ups are prevalent. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Ceramer 60 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Solver Polyimide Polyimide Resin Composite 40% Graphite can be used for aircraft, aviation, automobile, office equipment, electrical and electronic equipment, scientific instruments, industrial machinery, production equipment and so on. The polyimide is fit for the application surroundings which can be temperature resisting, sealed, dimensional stability, deformation without fracture, such as seeling ring, thrust washer, sliding bearing, vacuum pump vane, valve seat, gear and so on.

Agiplast Agimid 240B120 has mechanical properties along with the chemical, physical and high aging resistance. Agimid PA12 grades includes flame retardant, conductive, antistatic, reinforcement with glass fibers characteristics. Agimid 240B120 is PA 12 according to DIN 73378 PHL.

Inhance Fluoro-Seal UH-1150 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

BJB’s MD Series of semi rigid, medium work time urethane elastomers exhibit great flexibility and excellent durability. These tough, abrasion resistant systems easily process at room temperature.The MD Series is perfect for larger or more complex parts and offers superior performance in many applications such as rollers, foundry tooling and high impact semi rigid parts. For faster work times consider BJB’s FD Series of elastomers.

McLube® 787 is a water-based, heat-cured emulsion designed to prevent prerelease of large rotationally molded parts and provide multiple releases per application. Delivered ready-to-use.

Inhance Fluoro-Seal UH-1900 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

BJB’s FD Series of semi rigid, fast reacting urethane elastomers exhibit great flexibility and excellent durability. These tough, abrasion resistant systems easily process at room temperature and range in hardness from 50 Shore D to 70 Shore D. The FD Series offers superior performance in many applications such as rollers, foundry tooling and high impact semi rigid parts. For longer work times consider BJB’s MD Series of elastomers.

G-PAEK™ 1300G is Ultra High performance thermoplastic material, unreinforced Polyether Ketone (G-PAEKTM), semi-crystalline, materials may be considered as the general purpose Injection molding grades.

Ceramerplus 20 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

American Biltrite AB-135 is a Natural Rubber Polymer.

Inhance Fluoro-Seal UH-1700 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Ceramer 20 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

PPS-SGRN50 is high temperature thermoplastic of linear structure polymers because it exhibits a number of desirable properties. The properties include resistance to heat, acids and alkalies, and abrasion. PPS-SGRN50 is very suitable for compound due to the excellent reactivity of resin and other modifiers, such as GF, silane coupling agent.

Minerios Ouro Branco Quartz is a mineral of inorganic constitution, chemically inert, extracted from deposits and processed in different granulometric ranges according to the desired application. It is presented in hexagonal crystalline form. Quartz or natural crystalline silica is white to slightly grayish powder or granules, odorless, insoluble in water, low oil absorption and abrasive.

OpaLene LL E2507 is a butene co-monomer based linear low density grade produced with the latest Ineos Gas Phase polymerization technology.

"Original Material ""S"" plus+® FP [FS]® is a new technical plastic that completely meets the requirements of the food sector for the detectability of plastic foreign bodies in foods. ""FP"" stands for ""food protect"" and embodies two vital properties: This product is both food-safe and metal-detectable. Metallic foreign bodies in foodsare safety detected by metal detectors and removed. However, plastic particles from plant components can be problematic. Thanks to the use of additives in Original Material ""S"" plus+® FP [FS], all commonly used metal detectors in the food industry can now detect and remove plastic particles. Furthermore, in the case of this material, particles even smaller than the required size for the detectability of metal (3 mm) can be found and removed: Particles of only 2mm in size (see the illustration) have been detected without any problems in tests." A member of the S plus family Production based on PE-UHMW SG 1.1.

Agiplast Agimid 2496B00 has mechanical properties along with the chemical, physical and high aging resistance. Agimid PA12 grades includes flame retardant, conductive, antistatic, reinforcement with glass fibers characteristics. Agimid 2496B00 is PA 12 Antistatic.

Inhance Fluoro-Seal UH-1250 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Agiplast Agimid 248N070 has mechanical properties along with the chemical, physical and high aging resistance. Agimid PA12 grades includes flame retardant, conductive, antistatic, reinforcement with glass fibers characteristics. Agimid 248N070-S is a PA 12 according to UL 94V2.

Hitec® HDPE is a versatile material for use in a wide variety of applications and industries. It has excellent impact strength, scratch and chemical resistance, stiffness, and minimal moisture absorption.

Eracure L is a high performance curative that can be used to cure TDI based prepolymers. It provides significant improvements in dynamic and high temperature properties compared with commercially available systems. It provides improvement in dynamic performance, increased service temperature of elastomers by at least 25°C, increased abrasion resistance, improved resilience, low toxicity and it imparts transparent qualities.

G-PAEK™ 1100ESG is Ultra high Performance thermoplastic polymer, virgin, semicrystalline granules suitable for stock shapes extrusion, easy flow, Beige in color.

Inhance Fluoro-Seal UH-1750 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Solver Polyimide Polyimide Resin Composite 15% Graphite And 10% PTFE can be used for aircraft, aviation, automobile, office equipment, electrical and electronic equipment, scientific instruments, industrial machinery, production equipment, and so on. The polyimide is fit for the application surroundings which can be temperature resisting, sealed, dimensional stability, deformation without fracture, such as sealing ring, thrust washer sliding bearing, vacuum pump vane, valve seat, gear and so on.

Solver Polyimide Polyimide Resin Composite 15% Molybdenum Disulfide can be used for aircraft, aviation, automobile, office equipment, electrical and electronic equipment, scientific instrument, industrial machinery, production equipment and so on. The polyimide is fit for the application surroundings which can be temperature resisting, sealed, dimensional stability, deformation without fracture, such as sealing ring, thrust washer sliding bearing, vacuum pump vane, valve seat gear and so on.

Solver Polyimide Polyimide Resin Composite 15% Graphite can be used for aircraft, aviation, automobile, office equipment, electrical and electronic equipment, scientific instrument, industrial machinery production equipment, and so on. The polyimide is fit for the application surroundings which can be temperature resisting, sealed, dimensional stability, deformation without fracture, such as sealing ring, thrust washer, sliding bearing, vacuum pump vane, valve seat, gear and so on.

Inhance Fluoro-Seal UH-1035 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

TCP is an additive flame retardant plasticizer used in flexible polyurethane foams, whose superiority is demonstrated in excellent hydrolysis stability, good electric insulation performance, superior mildew resistance and abrasion resistance. It can be recommended as flame retardant for synthetic rubber, PVC, polyester, polyolefin, and plasticizer or flame retardant plasticizer for vinyl resin, nitrocellulose, butyl rubber and chloroprene rubber.

G-PAEK™ 1200G is Ultra high Performance thermoplastic polymer, virgin, semicrytalline granules suitable for injection molding, easy flow, Beige in color.