Products in Other Industrial Applications: Good Mechanical Properties

ZA 22 WT3 Spray is a addition silicone (PLATINUM curing agent) which has the product have to be used by spray. Ideal for vacuum bagging or for impression of vertical surface. It appears in light blue color and used in vacuum bagging.

Blendex® 3160 is a Engineering thermoplastics (ETPs) Improves impact of recycled ETPs.

Solver Polyimide Polyimide Resin Composite 40% Graphite can be used for aircraft, aviation, automobile, office equipment, electrical and electronic equipment, scientific instruments, industrial machinery, production equipment and so on. The polyimide is fit for the application surroundings which can be temperature resisting, sealed, dimensional stability, deformation without fracture, such as seeling ring, thrust washer, sliding bearing, vacuum pump vane, valve seat, gear and so on.

VICTREX® 450CA30 is a high performance material that exhibits high strength and heat resistant properties. Glass-filled grades provide improved rigidity and dimensional stability.

Agiplast Agimid 240B120 has mechanical properties along with the chemical, physical and high aging resistance. Agimid PA12 grades includes flame retardant, conductive, antistatic, reinforcement with glass fibers characteristics. Agimid 240B120 is PA 12 according to DIN 73378 PHL.

TİSESTER® F 10D03 R01 is a PBT, 10% Glass Fiber Reinforced, Natural

Blendex® 5470 is a High service temperature applications requiring good melt flow.

Sino Polymer MFE 711, formerly known as MFE-11, is a premium standard Bisphenol-A type epoxy vinyl ester resin. It provides resistance to a wide range of acids, alkalis, bleaches and solvents used in many chemical processing industry applications.

Zhermack ZA 35 Mold Fast is a low viscosity, dimensional stability, precision in reproduction. It appears in light green color and used in molding making.

Flontech PTFE FT-GR15-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Zhermack ZA 35 Mold is a addition silicone (Platinum curing agent) which has low viscosity, dimensional stability, precision in reproduction. It appears in yellow color and used in mold making.

Armlen PP MD 40-11TS is a 40% mineral filled, thermostabilized polypropylene. This material displays high mechanical and electrical properties; is resilient to cold and hot water, alkali, acids and detergents, organic polar solvents (acetone, spirits etc.), benzene fumes. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in white color.

TİSESTER F UNR F01 K02 HS R01 is a PBT, Flame Retardant-Halogen (Rohs Compilance), Heat Stabilized, Natural.

Flontech PTFE FT-CF10-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Murpec® SP is a High wear resistance; High compressive strength; Good slide properties; Good continuous temperature behavior. Production based on PEEK-SP.

Zhermack ZA 13 Mold WT45 is a addition silicone (Platinum curing agent) whish has low viscosity, high mechanical resistance, dimensional stability, precision in reproduction. Its color translucid and used in mold making.

Flontech PTFE FT-CAR25-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Blendex® SS 350 is used for General purpose and it has Improved melt strength, efficient.

TİSESTER® F 20D03 F01 K02 HS R01 is a PBT, 20% Glass Fiber Reinforced, Flame Retardant-Halogen (Rohs Compilance), Heat Stabilized, Natural

Preniphor™ EPFR-110DL is a kind of halogen free environmentally friendly flame retardant with N and P, especially designed for polypropylene, polyethylene and other advanced polyolefin products. Preniphor™ EPFR-110DL contains acid source, gas source and carbon source, taking flame retarding effect by intumescent flame retarded mechanism.

TİSESTER® F 15D03 R01 is a PBT, 15% Glass Fiber Reinforced, Natural

PPS-SG455E43 PPS is a 45% glass fiber reinforced polyphenylene sulfide compound developed to provide low cost and good engineering properties and processability

Zhermack ZA 22-45 Mold Neutro has low viscosity, high mechanical resistance, dimensional stability, precision in reproduction.

HaloPolymer PTFE Fluoroplast-4 grade PN20 (F-4PN20) is fully fluorinated resin which has an excellent chemical stability, electrical and mechanical properties. The material is a granular powder product designed for usage from small to medium billet compression molding, which is well suited to thin skived film applications requiring excellent physical and electrical properties.

Armlen PP MF 35-1 is a 35% mineral filled polypropylene. This material displays high mechanical properties, low buckling and shrinkage parameters, it may be applied as substitution of metals, thermosetting polymers and other thermoplastics (polyamides, polyester, ABS plastics) in technical products, including those exploited in chemically aggressive conditions, and general items. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in black color.

ZA 50 LT is a addition silicone (PLATINUM curing agent) which has good mechanical resistance, dimensional stability, precision in reproduction, resistance to high temperature. It appears in blue color and used in mold making.

Zhermack HT 33 Transparent is a addition silicone (Platinum curing agent) which has low viscosity, dimensional stability, precision in reproduction, high mechanical resistance, durability. It appears in translucid color and used in Mold Making, Jewelry etc.

TİSESTER F 20D03 K02 R01 is a PBT, 20% Glass Fiber Reinforced, Heat Stabilized, Natural.

Gichem DG06 Polypropylene is PP 30% talc, good mechanical characteristics, High Injection Speed.

Agiplast Agimid 2496B00 has mechanical properties along with the chemical, physical and high aging resistance. Agimid PA12 grades includes flame retardant, conductive, antistatic, reinforcement with glass fibers characteristics. Agimid 2496B00 is PA 12 Antistatic.

TİSESTER F 30D03 F01 K02 HS R01 is a PBT, 30% Glass Fiber Reinforced, Flame Retardant-Halogen (Rohs Compliance), Heat Stabilized, Natural.

RapidPurge RE9240 is a Premix most universal grade. It is the best answer for most resins. Formulated for 380F - 580F.

Solid Vulkollan® 18/40 fills the gap in the hardness range between rubber-elastic materials and hard plastics (e.g. polyamide) and can be adjusted between 65 Shore hardness A and 70 Shore hardness D. Due to its excellent property profile, Vulkollan® is used in all areas of industry where the highest demands are placed on the material. Articles of different geometries from a few grams to more than 100kg unit weight can be produced economically both in large series and in individual production.

RapidPurge RE3000 is a Concentrate grade, must be mixed with a carrier resin prior to use. It is very cost-effective.

Armlen PP MF 30-1 is a 30% mineral filled polypropylene. This material displays high mechanical properties, low buckling and shrinkage parameters, it may be applied as substitution of metals, thermosetting polymers and other thermoplastics (polyamides, polyester, ABS plastics) in technical products, including those exploited in chemically aggressive conditions, and general items. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation and etc. Available in white, blue and black.

Flontech PTFE FT-GL25-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.