Products in Other Industrial Applications: Good Processability

NGC040I Impact copolymer Polypropylene resin manufactured by IEPL using Spheripol Process know-how from Basell,Italy. It is a UV stabilized grade with excellent stress crack resistance, which can be used in different injection molding applications i.e. Crates, Luggage, Furniture, Auto-components, and Bobbins etc

OpaLene LL E2507 is a butene co-monomer based linear low density grade produced with the latest Ineos Gas Phase polymerization technology.

M6007LU is a Narrow MWD HDPE produced by Spherilene Technology M6007LU is ideally suited for injection molding of heavy duty Crates & Industrial products M6007LU is stabilized adequately with HALS+ to give long service life under outdoor exposure The precise control of morphology & MWD during polymerization confers superior processability & improved performance properties compared to conventional HDPE grades

M312 is a Heterophasic Polypropylene Impact Copolymer produced by the Spheripol Technology M312 combines excellent processability with high Flow, low Cycle Time, good Impact – Stiffness balance and good Gloss M312 is recommended for Injection Molded Automotive Components, Housewares, Luggage, Paint Pail, Compounds

NUC's EVA is widely used in the film and sheet fields because of its high transparency and good processability, and it is often used in commercial wraps, meat packaging and agricultural houses. It is also used as a base resin for additive master batches such as foaming agents and flame retardants, and is also used as one of the raw materials for manufacturing various industrial products.

PPS-SG503E65 PPS is a 50% glass fiber reinforced polyphenylene sulfide compound developed to provide excellent engineering properties and processability

Styrol-Acrylnitril abbreviated as SAN.

M311T is a Heterophasic Polypropylene Impact Copolymer produced by the Spheripol Technology M311T combines excellent processability with high flow, low cycle time, good Impact – Stiffness balance with high Toughness and good Gloss M311T is recommended for Injection Molded Automotive Components, Compounds, Molded Luggage & other Industrial Components

ETHYLENE PROPYLENE RUBBER (EPR/EPDM) 512E is a semi-crystalline rubber with medium molecular weight and high ethylene content, shows high green strength of uncured rubber and also its compound provides outstanding physical properties, also has its polymer design suited for the extrusion process. Excellent processability and articles with good shape retention are promised. 512EF is the same specification of 512E but 512EF is Friable Bale of 512E.

M365 is a Heterophasic Polypropylene Impact Copolymer produced by the Spheripol Technology M365 combines excellent processability with high Flow, low Cycle Time, low Warpage, good Gloss and is adequately nucleated for good Impact - Stiffness balance M365 is recommended for Injection Molded Appliance & White Goods Components, Automotive Components, Thin Walled Injection Molding (TWIM), Compounds

PPS-SG301A65 is a 30% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,temperature and chemical resistant and excellent processability

Agiplast Agimid 240B120 has mechanical properties along with the chemical, physical and high aging resistance. Agimid PA12 grades includes flame retardant, conductive, antistatic, reinforcement with glass fibers characteristics. Agimid 240B120 is PA 12 according to DIN 73378 PHL.

M5005L is a Narrow MWD HDPE produced by Spherilene Technology M5005L is recommended for injection molding of heavy duty Crates, Industrial products and for injection molded as well as extrusion compression molded caps for packaged drinking water The precise control of morphology & MWD during polymerization confers superior processability & improved performance properties compared to conventional HDPE grades

SBR 4684 is a developmental carbon black master batch (CBMB) containing 52 parts of N-234 carbon black. It is extended with 10 parts of highly aromatic oil. SBR 4684 has excellent abrasion resistance, superior physical properties and is smooth processing. Product is made to order on demand.

Korrels B.V. PA, 15% glass fiber reinforced, heatstabilized, natural is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

HPIG110 is Homopolymer polypropylene resin manufactured by IEPL using Spheripol process of Basell, Italy. It is a general purpose grade which can be used in many different injection molding applications.

Sino Polymer MFE 711, formerly known as MFE-11, is a premium standard Bisphenol-A type epoxy vinyl ester resin. It provides resistance to a wide range of acids, alkalis, bleaches and solvents used in many chemical processing industry applications.

TABOREN® PR 65 T 10S-089 is a PP/PE, Filler: Mineral filler, Stabilization: Antioxidant + UV + Anti-scratch

PPS-SG455E43 PPS is a 45% glass fiber reinforced polyphenylene sulfide compound developed to provide low cost and good engineering properties and processability

Korrels B.V. PA, Impact modified is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

Ubesta™ 3030 U is a high viscosity, non-reinforced and non-plasticized Polyamide 12 preferably for extrusion application. UBESTA 3030 U shows only low moisture absorption and therefore exceptional dimension stability..

PPS-SG303E41 is a 30% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,temperature and chemical resistant and excellent processability

UBE Nylon 5034 B is a PA6/6.6 copolyamide, produced by continuous polymerization process. It is a high viscosity grade suitable for numerous applications. The grade can be used for cast film and blown film (air cooled)..

ADVANCENE™ EM-5204-UVH High Density Polyethylene (HDPE) Resin is produced via advanced gas phase PE process and is intended for use in injection molding applications such as caps & closures, pails, industrial parts and other shipping containers. This resin has been designed to provide excellent for molders and to meet the rigorous characteristics of applications requiring stackability, environmental stress crack resistance and impact strength. This resin is also suitable for cast film extrusion processing.

Agiplast Agimid 2496B00 has mechanical properties along with the chemical, physical and high aging resistance. Agimid PA12 grades includes flame retardant, conductive, antistatic, reinforcement with glass fibers characteristics. Agimid 2496B00 is PA 12 Antistatic.

NUC's EVA is widely used in the film and sheet fields because of its high transparency and good processability, and it is often used in commercial wraps, meat packaging and agricultural houses. It is also used as a base resin for additive master batches such as foaming agents and flame retardants, and is also used as one of the raw materials for manufacturing various industrial products.

M6007L is a Narrow MWD HDPE produced by Spherilene Technology M6007L is ideally suited for injection molding of heavy duty Crates & Industrial products The precise control of morphology & MWD during polymerization confers superior processability & improved performance properties compared to conventional HDPE grades

Agiplast Agimid 248N070 has mechanical properties along with the chemical, physical and high aging resistance. Agimid PA12 grades includes flame retardant, conductive, antistatic, reinforcement with glass fibers characteristics. Agimid 248N070-S is a PA 12 according to UL 94V2.

Korrels B.V. PA, unfilled, flame retardant, natural is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

C4-LLDPE and HDPE are mainly used for seasoning tubes, blown bottles, water supply pipes and various industrial products, which have a good balance of flexibility and processability.

PPS-SG201E2L is a 20% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,chemical resistance and excellent processability

TABOREN® PH 51 G 40 is a PP homopolymer, Filler: Glass fibers, Stabilization: Basic antioxidant

Korrels B.V. PA, 10% carbon fiber reinforced, black is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.