Products in Power, Water & Utilities: Good Mechanical Properties

FILAVA™ WF BSB3_160.XXX.0127.T2/2.ISAA continuous filament for technical textiles and high-performance composites.

SMCarbon® 90CF60-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

Pfluon Chemical 8200GF30 is a glass fiber reinforced resin particle,standard viscosity,beige color and capable for plastic forming process like injection, squeeze etc.

SMCarbon® 24CF50-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group BMC EP 21 GF - structural material reinforced with fiber glass 45% . Excellent mechanical properties and heat resistance. It is generally used in industrial sector applicatons.

Toray 8020 is a new generation of toughened epoxy resin systems offering a balance of mechanical properties and excellent surface finish. The resin system has been developed to offer a long out life and flexible cure schedules and can be applied to a wide range of high performance fibers. Toray 8020 is compatible for co-cure with Toray’s resin film, Toray 8020, and Toray’s syntactic core, Toray MicroPly™ SC8020A.

Pfluon Chemical 8800G is a pure resin particle,hypocrystalline,standard viscosity and capable for plastic forming process like injection,squeeze etc. It appears in beige color.

Godiplast PEEK(CF) 8900CF30 is a Carbon reinforced resin particle, standard viscosity, black color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

LINCORE® FF UD 250 is a 100% flax fabric made of untwisted rovings.The molding can be realized by Infusion, Resin Transfer Molding, Resin Film Infusion Lay upThese fabrics are also availble as resin-impregnated reinforcements for high strength, toughness ans structural performance at low weight.

Polyumac Air-Cell T-200 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

Chopped strands or Chopped fibers made of FILAVA™ CS BSB3_011.06.IS65T.D fibers are designed to reinforce thermoplastics or thermoset composites and can be used for wet and dry fiber laying processes, compounding and injection molding (see ISOMATEX Sales department for more information).

Dragonite™ -XR is a halloysite-­‐based aluminosilicate clay exhibiting a rare, naturally occurring hollow tubular structure. Through its unique morphology and ideally-­‐suited chemistry, it enhances the properties of wide range of thermoset resins to meet the requirements of demanding applications. Dragonite™-XR is an untreated product grade with slightly lower reactivity and acidity due to 2% iron oxide content. It is recommended at loadings of 30 - 60 wt%.

Pfluon Chemical 8900GF30 is a glass fiber reinforced resin particle,standard viscosity,beige color and capable for plastic forming process like injection, squeeze etc.

EP GC 205 EN is a roving cloth epoxy (epoxide) resin.

SAERcore® patented SAERTEX product consists of one or two layers of chopped strand mats (CSM) and an intelligent flow media. Our multiaxial technology is integrated in our product SAERcore MAX, which reinforces the fabric complex while keeping same cavity thickness.

Pfluon Chemical 8800P is a coarse powder with diameter 500um,standard viscosity and capable for plastic injection, squeeze,compound modification etc. It appears in white color.

SMCarbon® 90CF40-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

RESOLCOAT 7060 is an epoxy clear or pigmented Gelcoat. Which has improved UV resistance, room temperature cure & high gloss and choice of slow and fast hardeners. RESOLCOAT 7060 epoxy gelcoat is specially formulated for the production of structural composites parts or tools requiring high mechanical & abrasion properties and room temperature curing. Two versions are available depending on the pot life needed : 1h45min for large parts or 16min for high production outputs, with a very fast curing time in film for the fast version - closer to a polyester curing time than to a typical epoxy. In both cases, the gelcoat may be ordered in its clear version (mainly for parts) or colored version for tools or parts production.

Woven fabrics made of FILAVA™ WF BSB3_0600.XXX.0127.T2/2.ISAA continuous filament for technical textiles and high-performance composites.

DISTITRON® 275 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

SAERcore® patented SAERTEX product consists of one or two layers of chopped strand mats (CSM) and an intelligent flow media. Our multiaxial technology is integrated in our product SAERcore MAX, which reinforces the fabric complex while keeping same cavity thickness.

Polyknit Easyflow Knitted Core is a warp knitted polypropylene fabric offering excellent flow media properties for advanced composite fabrication technologies including resin infusion and transfer molding processes.

Divinycell H provides excellent mechanical properties to low weight. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell H has been widely used and has a proven track record in virtually every application area where sandwich composites are employed including the marine (leisure, military and commercial), land transportation, wind energy, civil engineering/infrastructure and general industrial markets. Divinycell H is ideal for applications subject to fatigue, slamming or impact loads. Other key features of Divinycell H include consistent high quality, excellent adhesion/peel strength, excellent chemical resistance, low water absorption and good thermal/acoustic insulation. Divinycell H is compatible with virtually all commonly used resin and manufacturing systems.

C-TAPE™ U300P 12K HS FT* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 310 gsm. It is made using 12K HS carbon fiber. The binding provided by the weft, ensures the regularity of the product’s appearance; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

SMCarbon® 90CF50-3K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

Pfluon Chemical 8800FC30 is a abrasion reinforced Wear resistant particle,standard viscosity,black color and capable for plastic forming process like injection, squeeze etc.

Divinycell H provides excellent mechanical properties to low weight. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell H has been widely used and has a proven track record in virtually every application area where sandwich composites are employed including the marine (leisure, military and commercial), land transportation, wind energy, civil engineering/infrastructure and general industrial markets. Divinycell H is ideal for applications subject to fatigue, slamming or impact loads. Other key features of Divinycell H include consistent high quality, excellent adhesion/peel strength, excellent chemical resistance, low water absorption and good thermal/acoustic insulation. Divinycell H is compatible with virtually all commonly used resin and manufacturing systems.

Godiplast PEEK(G) 8900G is a Pure resin particle, hypocrystalline, standard viscosity, beige color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

Godiplast PEEK(CF) 8800CF30 is a Carbon reinforced resin particle, standard viscosity, black color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

EP GC 306 is a woven glass cloth epoxy (epoxide) resin.

EP GC 308 15 is a woven glass cloth epoxy (epoxide) resin.

SMCarbon® 24CF50-50K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These materials with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Godiplast PEEK(G) 8200G is a Pure resin particle, hypocrystalline, standard viscosity, beige color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

Stock shapes extruded from Ardel® resin are specifically formulated to endure the damaging effects of UV light. When exposed to UV light, the material undergoes a molecular change resulting in the formation of a protective layer that essentially serves as a UV stabilizer. This inherent UV stability combined with superior retention of optical and mechanical properties make polyarylate an ideal choice for any application where weathering effects could pose a problem.

Laminate G Ply - GY continuous fiber reinforced thermoplastic laminate single-layer tape or sheet is a thermoplastic composite material formed by hot pressing-cold pressing and other processes after angle layup design.

Godiplast PEEK(GF) 8800GF30 is a Glass reinforced resin particle, standard viscosity, beige color and capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.