Products in Power, Water & Utilities: Good Mechanical Properties

Chopped strands or Chopped fibers made of FILAVA™ CS BSB3_011.06.IS65T.D fibers are designed to reinforce thermoplastics or thermoset composites and can be used for wet and dry fiber laying processes, compounding and injection molding (see ISOMATEX Sales department for more information).

EP GC 205 EN is a roving cloth epoxy (epoxide) resin.

Godiplast PEEK(CF) 8900CF30 is a Carbon reinforced resin particle, standard viscosity, black color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

Pfluon Chemical 8800P is a coarse powder with diameter 500um,standard viscosity and capable for plastic injection, squeeze,compound modification etc. It appears in white color.

LINCORE® FF UD 250 is a 100% flax fabric made of untwisted rovings.The molding can be realized by Infusion, Resin Transfer Molding, Resin Film Infusion Lay upThese fabrics are also availble as resin-impregnated reinforcements for high strength, toughness ans structural performance at low weight.

SAERcore® patented SAERTEX product consists of one or two layers of chopped strand mats (CSM) and an intelligent flow media. Our multiaxial technology is integrated in our product SAERcore MAX, which reinforces the fabric complex while keeping same cavity thickness.

Verkid® SMC H154 is used in hot press, compression molding for the production of large parts with high mechanical properties and excellent surface finish. It is a glass fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives.

FILAVA™ MECY BSB3.7 320-80(10) Z30 IS65T CS03E are strands of continuous filaments made of enhanced mineral volcanic rock (aggregated and enriched batch) twisted in the yarns. The constituent strands or rovings are treated with “by-matrices or by-process” tailor made sizing system for excellent downstream treatment and transformation’s performance as well for high adherence to matrices in composites.

EP GC 201 black is a glass cloth epoxy (epoxide) resin.

Polyumac Air-Cell T-50 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

RECarbon® 90CFP40-400gr - Recycled molding compound based on epoxy resin and reinforced with reinforced with pyrolized carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Pfluon Chemical 8200CF30 is a carbon fiber reinforced resin particle,standard viscosity,black color and capable for plastic forming process like injection, squeeze etc.

EP GC 204 HF is a woven glass cloth epoxy (epoxide) resin.

SMCarbon® 90CF50-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

PRF Composite Materials RS-M135 is an ultra low viscosity laminating system formulated for use in the manufacture of composite components from glass, carbon and aramid fibers. The system is suitable for components requiring high static and fatigue strength properties using injectin molding (e.g. RTM), vacuum infusion and pultrusion processes. At 25°C the mixed viscosity is approximately 200 mPa s and may be lowered further to a value of 100 - 150 mPa s by warming the resin (see page 5), thus even complicated parts with long flow paths can be injected without difficulty. With a mold temperature of around 30°C, the temperature rise with hardener RS-MH137 remains very slight, allowing thicker parts to be built at elevated temperatures.

Barracuda Advanced Composites Divinycell H45 DCI is a rigid PVC foam 45 kg/m³ with DCI cut for vacuum infusion ideal for sandwich structures with high rigidity (80 x 60 cm).

Woven fabrics made of FILAVA™ WF BSB3_0360.XXX.0127.P.ISAA continuous filament for technical textiles and high-performance composites.

SMCarbon® 80CF60-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Toray 8020 is a new generation of toughened epoxy resin systems offering a balance of mechanical properties and excellent surface finish. The resin system has been developed to offer a long out life and flexible cure schedules and can be applied to a wide range of high performance fibers. Toray 8020 is compatible for co-cure with Toray’s resin film, Toray 8020, and Toray’s syntactic core, Toray MicroPly™ SC8020A.

Godiplast PEEK(GF) 8900GF30 is a Glass reinforced resin particle, standard viscosity, beige color and capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

Godiplast PEEK(G) 8100G is a Pure resin particle, hypocrystalline, standard viscosity, beige color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

Kamenny Vek BCS 13-1/4”-KV18 is mainly recommended for production of compounds by extrusion process with polypropylene, polyethylene and high density polyethylene resins.

Divinycell H provides excellent mechanical properties to low weight. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell H has been widely used and has a proven track record in virtually every application area where sandwich composites are employed including the marine (leisure, military and commercial), land transportation, wind energy, civil engineering/infrastructure and general industrial markets. Divinycell H is ideal for applications subject to fatigue, slamming or impact loads. Other key features of Divinycell H include consistent high quality, excellent adhesion/peel strength, excellent chemical resistance, low water absorption and good thermal/acoustic insulation. Divinycell H is compatible with virtually all commonly used resin and manufacturing systems.

Divinycell H provides excellent mechanical properties to low weight. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell H has been widely used and has a proven track record in virtually every application area where sandwich composites are employed including the marine (leisure, military and commercial), land transportation, wind energy, civil engineering/infrastructure and general industrial markets. Divinycell H is ideal for applications subject to fatigue, slamming or impact loads. Other key features of Divinycell H include consistent high quality, excellent adhesion/peel strength, excellent chemical resistance, low water absorption and good thermal/acoustic insulation. Divinycell H is compatible with virtually all commonly used resin and manufacturing systems.

LINCORE® FF P1 400 is a 100% flax fabric made of untwisted rovings. The molding can be realized by Infusion, Resin Transfer Molding, Resin Film Infusion Lay up. These fabrics are also availble as resin-impregnated reinforcements for high strength, toughness ans structural performance at low weight.

Polyumac Air-Cell T-150 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

Mar-Bal MB2000-15 is an excellent flame and track resistant material possessing outstanding electrical and mechanical properties.

SWANCOR 2591 is a hot-melt epoxy resin with low temperature curing and low exothermic properties. The formula does not contain Diuron and volatile ingredients. It has the characteristics of light weight, excellent mechanical strength, heat resistance and corrosion resistance.

Polyumac Air-Cell T-60 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

HiMax™ 3gsm DPA (Dot Pattern Adhesive) products are designed to help composite manufacturers maintain the desired position of the reinforcement prior to resin introduction, particularly in closed mold processes such as vacuum infusion and resin transfer molding. HiMax™ DPA was developed to provide the optimal level of tack while keeping additional weight to a minimum. The novel application process allows just 3 grams per m2 of adhesive to be applied to the specified fabric. Using DPA in conjunction with HiMax™ fabrics allows the user to easily position and re-position the individual layers of their laminate stack before resin is introduced. Conformance to tight radii and complex mold geometry is also aided by DPA.

SMCarbon® 80CF60-3K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

RECarbon® 90CF40-400gr - Recycled molding compound based on epoxy resin and reinforced with reinforced with carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

SMCarbon® 24CF40-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Godiplast PEEK(FC) 8800FC30 is a Wear resistent abrasion reinforced resin particle, standard viscosity, black color and capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

Polynt Group SMC LS 3200 R40 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for structural parts. SMC LS 3200 R40 meets mechanical and thermal properties with reduction weight of the final parts. SMC LS 3200 R40 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Divinycell H provides excellent mechanical properties to low weight. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell H has been widely used and has a proven track record in virtually every application area where sandwich composites are employed including the marine (leisure, military and commercial), land transportation, wind energy, civil engineering/infrastructure and general industrial markets. Divinycell H is ideal for applications subject to fatigue, slamming or impact loads. Other key features of Divinycell H include consistent high quality, excellent adhesion/peel strength, excellent chemical resistance, low water absorption and good thermal/acoustic insulation. Divinycell H is compatible with virtually all commonly used resin and manufacturing systems.